Toa VP-2122 Bruksanvisning

Toa mottagare VP-2122

Läs nedan 📖 manual på svenska för Toa VP-2122 (180 sidor) i kategorin mottagare. Denna guide var användbar för 19 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/180

INSTALLATION MANUAL

MATRIX SYSTEM SX-2000 SERIES

When an EN 54-16 compliant SX-2000 system has to be installed, then read "APPENDIX: ADDITIONAL

INSTALLATION INSTRUCTIONS FOR AN EN 54-16 COMPLIANT SYSTEM" in this document carefully

and follow up the installation and configuration requirements explained herein. This APPENDIX contains

the basic description of settings and installations, so please refer to the general instruction sections in

this document for more details.

Note

Refer to the Instruction Manual attached to the VX-2000DS for the installation of the the VX-2000DS

Emergency power supply, the VX-2000PF Power supply frame, and the VX-200PS Power supply unit.

1134

TOA Electronics Europe GmbH

Suederstrasse 282, 20537 Hamburg, Germany

The year when the CE mark was affixed on the product

is indicated by the first two digits of the serial number.

1134-CPD-102

EN 54-16: 2008

Fire detection and fire alarm systems

— Part 16: Voice alarm control and indicating equipment

Options:

Emergency microphone(s)

Manual reset of the voice alarm condition

Indication of faults related to voice alarm zones

Phased evacuation

Voice alarm condition output to CIE

Redundant power amplifiers

Thank you for purchasing TOA's Matrix System.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

TABLE OF CONTENTS

1. NOMENCLATURE AND FUNCTIONS

1.1. SX-2000SM System Manager .................................................................................. 6

1.2. SX-2000AI Audio Input Unit ................................................................................... 10

1.3. SX-2100AI Audio Input Unit ................................................................................... 15

1.4. SX-2000AO Audio Output Unit ............................................................................... 20

1.5. SX-2100AO Audio Output Unit ............................................................................... 26

1.6. SX-2000CI Control Input Unit ................................................................................. 32

1.7. SX-2000CO Control Output Unit ............................................................................ 34

1.8. RM-200SF Fireman's Microphone ......................................................................... 36

1.9. RM-200SA Remote Microphone ............................................................................ 39

1.10. RM-210 Remote Microphone Extension ................................................................ 42

1.11. RM-200RJ Terminal Unit ........................................................................................ 43

1.12. Optional Modules

1.12.1. SX-200RM Remote Microphone Interface Module .................................... 44

1.12.2. D-921E Microphone/Line Input Module ...................................................... 45

1.12.3. D-921F Microphone/Line Input Module ...................................................... 45

1.12.4. D-922E Microphone/Line Input Module ...................................................... 46

1.12.5. D-922F Microphone/Line Input Module ...................................................... 46

1.12.6. D-936R Stereo Input Module ..................................................................... 47

1.13. VP-2064, VP-2122, VP-2241, and VP-2421 Power Amplifiers .............................. 48

1.14. VP-200VX Power Amplifier Input Module ............................................................... 48

2. INSTALLATION

2.1. SX-2000SM

2.1.1. System reset enable/disable settings (DIP switch 3 operation) ................... 49

2.1.2. Failure reset operation method settings (DIP switch 4 operation) ............... 50

2.2. SX-2000AI and SX-2100AI

2.2.1. Module installation ....................................................................................... 51

2.2.2. Setting the device number ........................................................................... 52

2.2.3. Changing the type of control outputs (SX-2100AI only) ............................... 53

2.3. SX-2000AO and SX-2100AO

2.3.1. Setting the device number ........................................................................... 55

2.3.2. 24 V Emergency cutoff input settings (DIP switch 8 operation)

(SX-2000AO only) ........................................................................................ 56

2.3.3. Converting an output into a transformer-balanced output

(SX-2000AO only) ........................................................................................ 57

2.3.4. Changing the method of power supply for the control input signal

applied to the Local Audio Control Input Terminal (SX-2100AO only) ......... 60

2.4. SX-2000CO ............................................................................................................ 62

2.5. RM-200SF, RM-200SA, and RM-210

2.5.1. RM-200SF and RM-200SA device number settings

(DIP switches 1 – 3 operation) ..................................................................... 64

2.5.2. Adjusting microphone sensitivity (RM-200SF: DIP switch 5 operation

or RM-200SA: DIP switch 4 operation) ........................................................ 66

2.5.3. CPU OFF function (general urgency all-call) settings

(RM-200SF:DIP switch 6 operation or RM-200SA: DIP switch 5 operation)

..... 68

2.5.4. RM Communication function setting

(RM-200SF: DIP switch 4 operation or RM-200SA: DIP switch 6 operation)

.... 69

2.5.5. Using an external microphone (RM-200SA only) ......................................... 70

2.5.6. Compressor function setting ........................................................................ 72

2.5.7. Microphone fault detection function settings (RM-200SA only) ................... 74

2.5.8. Installing the RM-200SF on a wall ............................................................... 75

2.5.9. RM-200SA expansion with the addition of the RM-210

(Installed on a flat surface) ........................................................................... 79

2.5.10. Installing the RM-200SA on a wall ............................................................. 80

2.5.11. Installing the RM-210 on a wall .................................................................. 81

2.5.12. Creating remote microphone name labels ................................................. 83

2.6. VP-2064, VP-2122, VP-2241 and VP-2421 Power Amplifiers

2.6.1. Removing the VP Power Amplifier's top panel ............................................. 87

2.6.2. Changing the speaker line voltage ............................................................... 87

2.6.3. Installing the VP-200VX Power Amplifier Input Module

in the VP Power Amplifiers ........................................................................... 89

2.6.4. Ground lifting using the VP-200VX Power Amplifier Input Module .............. 91

2.6.5. Replacing the blade fuse .............................................................................. 92

2.7. Rack Mounting ....................................................................................................... 93

3. SYSTEM CONFIGURATION EXAMPLE

3.1. System Configuration Example 1 ........................................................................... 94

3.2. System Configuration Example 2 ........................................................................... 95

4. CONNECTIONS

4.1. Removable Terminal Plug Connection ................................................................... 96

4.2. Input Equipment Connections

4.2.1. Connections of SX-2100AO's Local audio control input terminals ............... 97

4.2.2. Connecting the SX-200RM to the RM-200SF or RM-200SA

(via RM-200RJ as needed) .......................................................................... 99

4.2.3. Connecting other input equipment ............................................................. 104

4.3. Output Equipment Connections

4.3.1. Connecting the SX-2000AO to power amplifiers ........................................ 106

4.3.2. Connecting the SX-2100AO to power amplifiers and speakers ................. 107

4.3.3. Connecting the SX-2100AO to external attenuators .................................. 108

4.3.4. Connecting the SX-2100AO to standby amplifiers ..................................... 109

4.4. Control Input/Output Connections

4.4.1. SX-2000SM ................................................................................................ 110

4.4.2. SX-2100AI .................................................................................................. 112

4.4.3. SX-2000AO and SX-2100AO ..................................................................... 115

4.4.4. SX-2000CI .................................................................................................. 118

4.4.5. SX-2000CO ................................................................................................ 119

4.5. SX Link Terminal Connections ............................................................................. 120

4.5.1. Redundant configuration of switching hubs ............................................... 121

4.5.2. Non-redundant configuration of switching hubs ......................................... 122

4.6. CI/CO Link Terminal Connections

4.6.1. Connecting a single SX-2000CI or SX-2000CO ........................................ 123

4.6.2. Connecting one each of SX-2000CI and SX-2000CO ............................... 123

4.7. Analog Link Terminal Connections ...................................................................... 124

4.8. Connections to Use the Surveillance Function

4.8.1. Speaker line surveillance (SX-2100AO only) ............................................. 125

4.8.2. Control line surveillance ............................................................................. 129

5. SPEAKER LINE INITIAL SETTING

5.1. Setting Items ........................................................................................................ 130

5.2. OPEN/SHORT Criterion by Comparing the Current Value

with the Initial Value ............................................................................................. 130

5.3. Setting Procedures

5.3.1. Summary setting procedures ..................................................................... 131

Produktspecifikationer

Varumärke:	Toa
Kategori:	mottagare
Modell:	VP-2122
Arbetstemperatur:	0 - 70 °C
Produktens-färg:	Черен
Certifikat:	FCC, CE
Kontakt 1:	USB A
Kontakt 2:	SFP
Дължина на кабела:	0.17 м
Технология на свързване:	Жичен
Grundläggande gränssnitt:	USB
Интерфейс:	Влакно
Fiberoptisk-kontakt:	SFP
Чипсет:	RTL8153/Realtek
Сертификати за устойчивост:	RoHS
Количество в опаковка:	1 броя
Relativ-luftfuktighet:	10 - 90
Förvaring-relativ-fuktighet:	10 - 90
Ширина:	71 мм
Дълбочина:	45 мм
Височина:	18 мм
Тегло:	50 г
Inre:	N
Компонент за:	Персонален компютър/тетрадка
Мрежови стандарти:	IEEE 802.1Q, IEEE 802.1p, IEEE 802.3az, IEEE 802.3z
Maximal-dataöverföringshastighet:	1000 Мбит/с
Windows-operativsystem som stöds:	Windows 10, Windows 7, Windows 8, Windows 8.1, Windows Vista, Windows XP
Mac-operativsystem som stöds:	Y
Linux-stöd:	Y
Andra operativsystem som stöds:	ChromeOS