Toorx WBX-30 Bruksanvisning

Läs nedan 📖 manual på svenska för Toorx WBX-30 (7 sidor) i kategorin Motionscykel. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7
Ed : 03/17 Rev : 00
INSTRUCTION
Attach the Ajustment Knot (24) on the Sliding Block (06) and slide the Sliding Block (06) onto the center
of the Main Frame (01).
Attach the Rear Stabilizer (05) to the end of the Main Frame (01) and using one Hex Bolt (30) two Washers
(36) one Nylon Nut (34). Insert one Hex Bolt (32) and one Washer (36) up through the bottom holes.
Attach Front Stabilizer (03) to Front Upright (02), then slide Adjustment Foam Tube (11) to Front Upright
(02) and secure it in place with the Knob (26).Attah Front Upright (02) to the front end of Main Frame (01)
using one Hex Bolt (29),two Washers (35) and one Nylon Nut (33), then insert a Lock Pin (27).
Attach the Rear Upright (04) to Main Fram as illustrated using one Hex Bolt (29),two Washers (35) and one
Nylon Nut (33),then insert one Lock Pin (28)
STEP 1
Attach the Seat Adjustment Bar (10) beams to the Seat Tube (09),at the same time attach the Seat Tube (09)
to the Maine Frame (01) as illustrated.Attch the Seat to Seat Tube (09) using four Hex Bolts (31) and four
Washers (36).
Aattach the Adjustment Bar (05) to the Sliding Block (06) by one Hex Bolt (30),two Washers (36) and one
Nylon Nut (34).Attach Backrest Tube (08) to Sliding Block (06) and Main Frame (01).Attach the Backrest
(14) to Backrest Tube (08) using four Hex Bolts (31) and four Washers (36).
STEP 2

Produktspecifikationer

Varumärke: Toorx
Kategori: Motionscykel
Modell: WBX-30

Behöver du hjälp?

Om du behöver hjälp med Toorx WBX-30 ställ en fråga nedan och andra användare kommer att svara dig




Motionscykel Toorx Manualer

Motionscykel Manualer

Nyaste Motionscykel Manualer