Toshiba Satellite A55 Bruksanvisning

Toshiba Laptop Satellite A55

Läs nedan 📖 manual på svenska för Toshiba Satellite A55 (242 sidor) i kategorin Laptop. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/242

PMAD00008011

08/04

Satellite® A55 Series

User’s Guide

If you need assistance:

❖Toshiba Global Support Centre

Calling within the United States (800) 457-7777

Calling from outside the United States (949) 859-4273

For more information, see “If Something Goes Wrong” on

page 170 in this guide.

Handling the cord on this product will expose you to lead, a

chemical known to the State of California to cause birth defects

or other reproductive harm. Wash hands after handling.

Models: Satellite® A55 Series

ReWritable CD/DVD Drives

The computer system you purchased may include a ReWritable CD and/or DVD

drive(s), among the most advanced data storage technologies available. As with

any new technology, you must read and follow all set-up and usage instructions in

the applicable user guides and/or manuals enclosed. If you fail to do so, this

product may not function properly and you may lose data or suffer other damage.

TOSHIBA AMERICA INFORMATION SYSTEMS (“TOSHIBA”), ITS

AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT

OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR

ERROR FREE. YOU AGREE THAT TOSHIBA, ITS AFFILIATES AND

SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO

OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DATA OR

REMOVABLE STORAGE MEDIA ARISING OUT OF OR RESULTING

FROM THE USE OF THE PRODUCT, EVEN IF ADVISED OF THE

POSSIBILITY THEREOF.

Protection of Stored Data

For your important data, please make periodic back-up copies of all the data

stored on the hard disk or other storage devices as a precaution against possible

failures, alteration, or loss of the data. IF YOUR DATA IS ALTERED OR

LOST DUE TO ANY TROUBLE, FAILURE OR MALFUNCTION OF

THE HARD DISK DRIVE OR OTHER STORAGE DEVICES AND THE

DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE

LIABLE FOR ANY DAMAGE OR LOSS OF DATA, OR ANY OTHER

DAMAGE RESULTING THEREFROM. WHEN COPYING OR

TRANSFERRING YOUR DATA, PLEASE BE SURE TO CONFIRM

WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR

TRANSFERRED. TOSHIBA DISCLAIMS ANY LIABILITY FOR THE

FAILURE TO COPY OR TRANSFER THE DATA CORRECTLY.

Critical Applications

The computer you have purchased is not designed for any “critical applications.”

“Critical applications” means life support systems, medical applications,

connections to implanted medical devices, commercial transportation, nuclear

facilities or systems or any other applications where product failure could lead to

injury to persons or loss of life or catastrophic property damage.

ACCORDINGLY, TOSHIBA, ITS AFFILIATES AND SUPPLIERS

DISCLAIM ANY AND ALL LIABILITY ARISING OUT OF THE USE

OF THE COMPUTER PRODUCTS IN ANY CRITICAL

APPLICATIONS. IF YOU USE THE COMPUTER PRODUCTS IN A

CRITICAL APPLICATION, YOU, AND NOT TOSHIBA, ASSUME

FULL RESPONSIBILITY FOR SUCH USE.

FCC Notice “Declaration of Conformity Information”

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, it may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

❖Reorient or relocate the receiving antenna.

❖Increase the separation between the equipment and receiver.

❖Connect the equipment to an outlet on a circuit different from that to which

the receiver is connected.

❖Consult the dealer or an experienced radio/TV technician for help.

Only Peripherals complying with the FCC Class B limits may be attached to

this equipment. Operation with noncompliant peripherals or peripherals not

recommended by Toshiba is likely to result in interference to radio and TV

reception. Shielded cables must be used between the external devices and

the computer's parallel port, monitor port, USB port, PS/2 port ®, i.LINK®

port and microphone jack. Changes or modifications made to this equipment

not expressly approved by Toshiba or parties authorized by Toshiba could

void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

❖This device may not cause harmful interference.

❖This device must accept any interference received, including interference

that may cause undesired operation.

NOTE

NOTENOTE

Contact:

Toshiba America Information Systems, Inc.

9740 Irvine Blvd.

Irvine, CA 92618-1697

(949) 583-3000

Industry Canada requirement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conformé à la norme NMB-003 du

Canada.

FCC requirements

The following information is pursuant to FCC CFR 47, Part 68 and refers to

internal modems.

This equipment complies with Part 68 of the FCC rules. On the bottom of this

equipment is a label that contains, among other information, the FCC registration

number and ringer equivalence number (REN) for this equipment. If requested,

the information must be provided to the telephone company.

The modem connects to the telephone line by means of a standard jack called the

USOC RJ11C.

A plug and jack used to connect this equipment to the premises wiring and

telephone network must comply with the applicable FCC part 68 rules and

requirements adopted by the ACTA. It is designed to be connected to a

compatible modular jack that is also compliant.

The REN is used to determine the number of devices that may be connected to a

telephone line. Excessive RENs on a telephone line may result in the devices not

ringing in response to an incoming call. In most but not all areas, the sum of

RENs should not exceed five (5.0). To be certain of the number of devices that

may be connected to a line, as determined by the total RENs, contact the local

telephone company. For products approved after July 23, 2001, the REN for this

product is part of the product identifier that has the format

US:AAAEQ##TXXXX. The digits represented by the ## are the REN without a

decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is

separately shown on the label.

Connection to party line service is subject to state tariffs. Contact the state public

utility commission, public service commission or corporation commission for

information.

Telephone Company Procedures

The goal of the telephone company is to provide you with the best service it can.

In order to do this, it may occasionally be necessary for them to make changes in

their equipment, operations or procedures. If these changes might affect your

service or the operation of your equipment, the telephone company will give you

notice, in writing, to allow you to make any changes necessary to maintain

uninterrupted service.

If Problems Arise

If this equipment causes harm to the telephone network, the telephone company

will notify you in advance that temporary discontinuance of service may be

required. But if advanced notice is not practical, the telephone company will

notify the customer as soon as possible. Also, you will be advised of your right to

file a complaint with the FCC if you believe it is necessary.

If trouble is experienced with this equipment, for repair or limited warranty

information, please contact Toshiba Corporation, Toshiba America Information

Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support

Centre within the United States at (800) 457-7777 or Outside the United States at

(949) 859-4273. If the equipment is causing harm to the telephone network, the

telephone company may request that you disconnect the equipment until the

problem is resolved.

Disconnection

If you should ever decide to permanently disconnect your modem from its

present line, please call the telephone company and let them know of this change.

Fax Branding

The Telephone Consumer Protection Act of 1991 makes it unlawful for any

person to use a computer or other electronic device, including Fax machines, to

send any message unless such message clearly contains in a margin at the top or

bottom of each transmitted page or on the first page of the transmission, the date

and time it is sent and an identification of the business or other entity, or other

individual sending the message and the telephone number of the sending

machine or such business, other entity, or individual. (The telephone number

provided may not be a 900 number or any other number for which charges

exceed local or long-distance transmission charges.)

In order to program this information into your fax transmission, refer to the fax

software instructions installed on this computer.

Alarm Equipment

If your home has specially wired alarm equipment connected to the telephone

line, ensure the installation of this equipment does not disable your alarm

equipment. If you have questions about what will disable alarm equipment,

consult your telephone company or a qualified installer.

Instructions for IC CS-03 Certified Equipment

1NOTICE: The Industry Canada label identifies certified equipment.

This certification means that the equipment meets certain

telecommunications network protective, operational and safety

requirements as prescribed in the appropriate Terminal Equipment

Technical Requirements document(s). The Department does not

guarantee the equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure that it is permissible to

be connected to the facilities of the local telecommunications company. The

equipment must also be installed using an acceptable method of connection.

The customer should be aware that compliance with the above conditions

may not prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a representative

designated by the supplier. Any repairs or alterations made by the user to

this equipment, or equipment malfunctions, may give the

telecommunications company cause to request the user to disconnect the

equipment.

Users should ensure for their own protection that the electrical ground

connections of the power utility, telephone lines and internal metallic water

pipe system, if present, are connected together. This precaution may be

particularly important in rural areas.

Caution: Users should not attempt to make such connections themselves,

but should contact the spection authority, or appropriate electric in

electrician, as appropriate.

2The user manual of analog equipment must contain the equipment’s

Ringer Equivalence Number (REN) and an explanation notice similar

to the following:

The Ringer Equivalence Number (REN) of this device can be found on the

label affixed to your computer.

NOTICE: The Ringer Equivalence Number (REN) assigned to each

terminal device provides an indication of the maximum number of

terminals allowed to be connected to a telephone interface. The termination

on an interface may consist of any combination of devices subject only to

the requirement that the sum of the Ringer Equivalence Numbers of all the

devices does not exceed 5.

3The standard connecting arrangement (telephone jack type) for this

equipment is jack type(s): USOC RJ11C.

Wireless Interoperability

The TOSHIBA Wireless LAN Mini PCI Card products are designed to be

interoperable with any wireless LAN product that is based on Direct Sequence

Spread Spectrum (DSSS) radio technology, and is compliant to:

❖The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as defined

and approved by the Institute of Electrical and Electronics Engineers.

❖The Wireless Fidelity (Wi-Fi) certification as defined by the Wi-Fi Alliance.

The “Wi-Fi CERTIFIED” logo is a certification mark of the Wi-Fi Alliance.

Bluetooth™ and Wireless LAN devices operate within the same radio

frequency range and may interfere with one another. If you use Bluetooth™

and Wireless LAN devices simultaneously, you may occasionally experience

a less than optimal network performance or even lose your network

connection.

If you should experience any such problem, immediately turn off your

Bluetooth™ or Wireless LAN device.

Please contact Toshiba PC product support on Web site http://www.toshiba-

europe.com/computers/tnt/bluetooth.htm in Europe or

http://www.pcsupport.global.toshiba.com in the United States for more

information.

This device is restricted to indoor use due to its operation in the 5.15 GHz to

5.85 GHz frequency range.

Wireless LAN and your Health

Wireless LAN products, like other radio devices, emit radio frequency

electromagnetic energy. The level of energy emitted by Wireless LAN devices

however is far much less than the electromagnetic energy emitted by wireless

devices like for example mobile phones.

Because Wireless LAN products operate within the guidelines found in radio

frequency safety standards and recommendations, TOSHIBA believes Wireless

LAN is safe for use by consumers. These standards and recommendations reflect

the consensus of the scientific community and result from deliberations of panels

and committees of scientists who continually review and interpret the extensive

research literature.

In some situations or environments, the use of Wireless LAN may be restricted

by the proprietor of the building or responsible representatives of the

organization. These situations may for example include:

❖Using the Wireless LAN equipment on board of airplanes, or

❖In any other environment where the risk of interference to other devices or

services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a

specific organization or environment (e.g. airports), you are encouraged to ask for

authorization to use the Wireless LAN device prior to turning on the equipment.

Regulatory Information

The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict

accordance with the manufacturer’s instructions as described in the user

documentation that comes with the product. This device complies with the

following radio frequency and safety standards.

Canada – Industry Canada (IC)

This device complies with RSS 210 of Industry Canada.

The installer of this radio equipment must ensure that the antenna is located

or pointed such that it does not emit RF field in excess of Health Canada

limits for the general population; consult Safety Code 6, obtainable from

Health Canada’s Web site www.hc-sc.gc.ca/rpb. The RF device shall not be

co-located with any other transmitter that has not been tested with this

device.

Operation is subject to the following two conditions: (1) this device may not

cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of this device.

L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1)

il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit étre prêt à

accepter tout brouillage radioélectrique reçu, même si ce brouillage est

susceptible de compromettre le fonctionnement du dispositif.

The term “IC” before the equipment certification number only signifies that the

Industry Canada technical specifications were met.

To prevent radio interference to the licensed service, this device is intended to be

operated indoors and away from windows to provide maximum shielding.

Equipment (or its transmit antenna) that is installed outdoors is subject to

licensing.

Pour empecher que cet appareil cause du brouillage au service faisant l'objet

d'une licence, il doit etre utilize a l'interieur et devrait etre place loin des fenetres

afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne

d'emission) est installe a l'exterieur, il doit faire l'objet d'une licence.

This device is restricted to indoor use due to its operation in the 5.15 GHz to

5.25 GHz frequency range. Industry Canada requires this product to be used

indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for

harmful interference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users of the 5.25 GHz to 5.35

GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause

interference with and/or damage this device.

Europe – EU Declaration of Conformity

❖This device complies with the essential requirements of the R&TTE

Directive 1999/5/EC with essential test suites as per standards:

EN 60950 Safety of Information Technology equipment

ETS 300 328 Technical requirements for radio equipment

ETS 300 826 General EMC requirements for radio equipment.

English: Hereby, TOSHIBA Corp. Digital Media Network Company, declares

that this Radio LAN device is in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC.

Finnish: Valmistaja TOSHIBA Corp. Digital Media Network Company

vakuuttaa täten että Radio LAN device tyyppinen laite on direktiivin

1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden

ehtojen mukainen.

Dutch: Hierbij verklaart TOSHIBA Corp. Digital Media Network Company dat

het toestel Radio LAN device in overeenstemming is met de essentiële

eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.

Bij deze TOSHIBA Corp. Digital Media Network Company dat deze

Radio LAN device voldoet aan de essentiële eisen en aan de overige

relevante bepalingen van Richtlijn 1999/5/EC.

French: Par la présente TOSHIBA Corp. Digital Media Network Company

déclare que l'appareil Radio LAN device est conforme aux exigences

essentielles et aux autres dispositions pertinentes de la directive 1999/5/

CE.

Par la présente, TOSHIBA Corp. Digital Media Network Company

déclare que ce Radio LAN device est conforme aux exigences

essentielles et aux autres dispositions de la directive 1999/5/CE qui lui

sont applicables.

Swedish: Härmed intygar TOSHIBA Corp. Digital Media Network Company att

denna Radio LAN device står I överensstämmelse med de väsentliga

egenskapskrav och övriga relevanta bestämmelser som framgår av

direktiv 1999/5/EG.

Danish: Undertegnede TOSHIBA Corp. Digital Media Network Company

erklærer herved, at følgende udstyr Radio LAN device overholder de

væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF

German: Hiermit erklärt TOSHIBA Corp. Digital Media Network Company, dass

sich dieser/diese/dieses Radio LAN device in Übereinstimmung mit den

grundlegenden Anforderungen und den anderen relevanten Vorschriften

der Richtlinie 1999/5/EG befindet". (BMWi)

Hiermit erklärt TOSHIBA Corp. Digital Media Network Company die

Übereinstimmung des Gerätes Radio LAN device mit den

grundlegenden Anforderungen und den anderen relevanten

Festlegungen der Richtlinie 1999/5/EG. (Wien)

Greek:

Italian: Con la presente TOSHIBA Corp. Digital Media Network Company

dichiara che questo Radio LAN device è conforme ai requisiti essenziali

ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.

USA – Federal Communications Commission (FCC)

This device complies with Part 15 of FCC Rules. Operation of the devices in a

Wireless LAN System is subject to the following two conditions:

❖This device may not cause harmful interference.

❖This device must accept any interference that may cause undesired

operation.

TOSHIBA is not responsible for any radio or television interference caused by

unauthorized modification of the devices included with this TOSHIBA Wireless

LAN Mini PCI Card, or the substitution or attachment of connecting cables and

equipment other than specified by TOSHIBA.

The correction of interference caused by such unauthorized modification,

substitution or attachment will be the responsibility of the user.

Caution: Exposure to Radio Frequency Radiation

The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far

below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA

Wireless LAN Mini PCI Card shall be used in such a manner that the potential

for human contact during normal operation is minimized. In normal operating

configuration, the LCD in the upright position, the distance between the antenna

and the user should not be less than 20 cm. The antenna(s) used for this

transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter. Antenna(s) used in 5.15 GHz to 5.25 GHz frequency band

must be integral antenna which provide no access to the end user.

Refer to the Regulatory Statements as identified in the documentation that comes

with those products for additional information.

Spanish: Por medio de la presente TOSHIBA Corp. Digital Media Network

Company declara que el Radio LAN device cumple con los requisitos

esenciales y cualesquiera otras disposiciones aplicables o exigibles de la

Directiva 1999/5/CE.

Portuguese: TOSHIBA Corp. Digital Media Network Company declara que este

Radio LAN device está conforme com os requisitos essenciais e outras

disposições da Directiva 1999/5/CE.

Caution: Radio Frequency Interference Requirements

This device is restricted to indoor use due to its operation in the 5.15 GHz to

5.25 GHz frequency range. FCC requires this product to be used indoors for

frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful

interference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users of the 5.25 GHz to 5.35 GHz

and 5.65 GHz to 5.85 GHz bands. These radar stations can cause interference

with and/or damage this device.

The above Caution information applies to products that operate with an

802.11a device.

Taiwan

The legal communications mentioned in the above item refer to radio

communications operated in accordance with telecommunication laws and

regulations.

Low power radio frequency electric machinery shall resist against interference

from legal communications or from industrial, scientific and medical radio

emission electric machinery.

Using this Equipment in Japan

In Japan, the frequency bandwidth of 2,400 MHz to 2,483.5 MHz for second

generation low-power data communication systems such as this equipment

overlaps that of mobile object identification systems (premises radio station and

specified low-power radio station).

1. Sticker

Please put the following sticker on devices incorporating this product.

Article 14 Unless approved, for any model accredited low power radio frequency

electric machinery, any company, trader or user shall not change the

frequency, increase the power or change the features and functions of the

original design.

Article 17 Any use of low power radio frequency electric machinery shall not affect

the aviation safety and interfere with legal communications. In event that

any interference is found, the use of such electric machinery shall be

stopped immediately, and reusing of such products can be resumed until

no interference occurs after improvement.

NOTE

NOTENOTE

2. Indication

The indication shown below appears on this equipment.

12.4: This equipment uses a frequency of 2.4 GHz.

2DS: This equipment uses DS-SS modulation.

OF: This equipment uses OFDM modulation.

3The interference range of this equipment is less than 40m.

4This equipment uses a frequency bandwidth from

2,400 MHz to 2,483.5 MHz.

It is possible to avoid the band of mobile object identification systems.

3. TOSHIBA Direct PC

Monday – Friday: 10:00 – 17:00

Toll Free Tel: 0120-13-1100

Direct Dial: 03-3457-5916

Fax: 03-5444-9450

Device Authorization

This device obtains the Technical Regulation Conformity Certification and the

Technical Conditions Compliance Approval, and it belongs to the device class of

radio equipment of low-power data communication system radio station

stipulated in the Radio Law and the Telecommunications Business Law of Japan.

The Name of the radio equipment: refer to the equipment label provided on the

computer

JAPAN APPROVALS INSTITUTE FOR TELECOMMUNICATIONS

EQUIPMENT

2.4DSOF4

(1)

(2) (3)

(4)

Approval Number: D01-1128JP

TELECOM ENGINEERING CENTER Approval Number: 03NY.A0018,

03GZDA0017

The following restrictions apply:

❖Do not disassemble or modify the device.

❖Do not install the embedded wireless module into other device.

❖5.17 GHz to 5.23 GHz for indoor use only

Radio approvals for wireless devices

The following information is dependent on what type of wireless device is in

your computer.

Approved Countries/Regions for use for the Atheros

AR5BMB-43/44 Mini PCI Wireless network adapter

This equipment is approved to the radio standard by the countries/regions in the

following table.

Do not use this equipment except in the countries/regions in the following

table.

This device works on passive scan only.

A peer-to-peer mode is not available in 802.11a and Turbo Mode.

802.11b (2.4 GHz)

Australia Austria Belgium

Canada Denmark Finland

France Germany Greece

Ireland Italy Liechtenstein

Luxembourg Netherlands New Zealand

Norway Portugal Sweden

Switzerland UK USA

NOTE

NOTENOTE

NOTE

NOTENOTE

Europe - Restrictions for use of 2.4 GHz Frequencies in

European Community Countries

België/

Belgique:

For private usage outside buildings across public grounds over less than

300m no special registration with IBPT/BIPT is required. Registration to

IBPT/BIPT is required for private usage outside buildings across public

grounds over more than 300m. For registration and license please

contact IBPT/BIPT.

Voor privé-gebruik buiten gebouw over publieke groud over afstand

kleiner dan 300m geen registratie bij BIPT/IBPT nodig; voor gebruik

over afstand groter dan 300m is wel registratie bij BIPT/IBPT nodig.

Voor registratie of licentie kunt u contact opnemen met BIPT.

Dans le cas d’une utilisation privée, à l’extérieur d’un bâtiment, au-

dessus d’un espace public, aucun enregistrement n’est nécessaire pour

une distance de moins de 300m. Pour une distance supérieure à 300m un

enregistrement auprès de I’IBPT est requise. Pour les enregistrements et

licences, veuillez contacter I’IBPT.

Deutschland: License required for outdoor installations. Check with reseller for

procedure to follow.

Anmeldung im Outdoor-Bereich notwendig, aber nicht

genehmigungspflichtig.Bitte mit Händler die Vorgehensweise

abstimmen.

France: Restricted frequency band: only channels 1 to 7 (2400 MHz and 2454

MHz respectively) may be used outdoors in France. Please contact

A.R.T. (http://www.art-telecom.fr) for applicable procedures to follow.

Bande de fréquence restreinte: seuls les canaux 1- 7 (2400 et 2454 MHz

respectivement) doivent être utilisés endroits extérieur en France. Vous

pouvez contacter I’Autorité de Régulation des Télécommuniations

(http://www.art-telecom.fr) pour la procédure à suivre.

Italia: License required for indoor use. Use with outdoor installations not

allowed.

E’necessaria la concessione ministeriale anche per l’uso interno.

Verificare con i rivenditori la procedura da seguire.

Nederland: License required for outdoor installations. Check with reseller for

procedure to follow.

Licentie verplicht voor gebruik met buitenantennes. Neem contact op

met verkoper voor juiste procedure.

802.11a (5 GHz)

Turbo Mode (5 GHz)

Europe - Restrictions for use of 5 GHz Frequencies in

European Community Countries

O: allowed ×: forbidden

❖To remain in conformance with European spectrum usage laws for Wireless

LAN operation, the above 2.4 GHz and 5 GHz channel limitations apply.

The user should use the wireless LAN utility to check the current channel of

operation. If operation is occurring outside of the allowable frequencies as

listed above, the user must cease operating the Wireless LAN at that

location and consult he local technical support staff responsible for the

wireless network.

❖The 5 GHz Turbo mode feature is not allowed for operation in any

European Community country.

Australia Austria Belgium

Canada Denmark Finland

France Germany Greece

Ireland Italy Liechtenstein

Luxembourg Netherlands New Zealand

Norway Portugal Sweden

Switzerland UK USA

Canada USA

European Community

Countries

5150-5250 MHz

Channels: 36, 40, 44,

Indoor Only

5250-5350 MHz

Channels: 52, 56, 60,

Indoor Only

5470-5725 MHz

Channels: 100, 104, 108, 112,

116, 120, 124, 128, 132, 136, 140

Indoor/Outdoor

Austria O x x

Belgium, France,

Switzerland/Lichtenstein

O O x

Denmark, Finland,

Germany, Greece,

Ireland, Italy,

Luxembourg,

Netherlands, Norway,

Portugal, Sweden, UK

O O O

Iceland, Spain O O O

❖This device must not be operated in ad-hoc mode using channels in the

5 GHz bands in the European Community. Ad-hoc mode provides a direct

communication between two client devices without a Wireless LAN Access

Point.

❖This device must be used with Access Points that have employed and

activated a radar detection feature required for European Community

operation in the 5 GHz bands. This device will operate under the control of

the Access Point in order to avoid operating on a channel occupied by any

radar system in the area. The presence of nearby radar operation may result

in temporary interruption of operation of this device. The Access Point’s

radar detection feature will automatically restart operation on a channel free

of radar. You may consult with the local technical support staff responsible

for the wireless network to ensure the Access Point device(s) are properly

configured for European Community operation.

Approved Countries/Regions for use for the Atheros AR5001X

Mini PCI Wireless network adapter

This equipment is approved to the radio standard by the countries/regions in the

following table.

Do not use this equipment except in the countries/regions in the following

table.

This device works on passive scan only.

A peer-to-peer mode is not available in 802.11a and Turbo Mode.

802.11b (2.4 GHz)

Australia Austria Belgium

Canada Denmark Finland

France Germany Greece

Ireland Italy Liechtenstein

Luxembourg Netherlands New Zealand

Norway Portugal Sweden

Switzerland UK USA

NOTE

NOTENOTE

802.11a (5 GHz)

Turbo Mode (5 GHz)

Approved Countries/Regions for use for the Intel® PRO/

Wireless LAN 2100 3B Mini PCI Adapter

This equipment is approved to the radio standard by the countries/regions in the

following table.

Do not use this equipment except in the countries/regions in the following

table.

Australia Austria Belgium

Canada Denmark Finland

France Germany Greece

Ireland Italy Liechtenstein

Luxembourg Netherlands New Zealand

Norway Portugal Sweden

Switzerland UK USA

Canada USA

Argentina Australia Austria

Belgium Brazil Canada

Chile Denmark Finland

France Germany Greece

Iceland Ireland Italy

Japan Liechtenstein Luxembourg

Mexico Netherlands New Zealand

Norway Peru Portugal

Singapore Spain Sweden

Switzerland UK Uruguay

USA Venezuela

Approved Countries/Regions for use for the Toshiba Mini PCI

Wireless LAN Card

This equipment is approved to the radio standard by the countries/regions in the

following table.

Do not use this equipment except in the countries/regions in the following

table.

Bluetooth wireless technology Interoperability

Bluetooth™ Cards from TOSHIBA are designed to be interoperable with any

product with Bluetooth wireless technology that is based on Frequency Hopping

Spread Spectrum (FHSS) radio technology, and is compliant to:

❖Bluetooth Specification as defined and approved by The Bluetooth Special

Interest Group.

❖Logo certification with Bluetooth wireless technology as defined by The

Bluetooth Special interest Group.

Australia Austria Belgium

Canada Denmark Finland

France Germany Greece

Hong Kong Iceland Ireland

Italy Japan Liechtenstein

Luxembourg Malaysia Netherlands

New Zealand Norway Philippines

Portugal Singapore Spain

Sweden Switzerland Thailand

UK USA

Bluetooth wireless technology is a new innovative technology, and TOSHIBA

has not confirmed compatibility of its Bluetooth™ products with all PCs and/

or equipment using Bluetooth wireless technology other than TOSHIBA

portable computers.

Always use Bluetooth™ cards from TOSHIBA in order to enable wireless

networks over two or more (up to a total of seven) TOSHIBA portable

computers using these cards. Please contact TOSHIBA PC product support

on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in

Europe or http://www.pcsupport.global.toshiba.com in the United States for

more information.

When you use Bluetooth™ cards from TOSHIBA close to 2.4 GHz Wireless

LAN devices, Bluetooth transmissions might slow down or cause errors. If

you detect certain interference while you use Bluetooth™ cards from

TOSHIBA, always change the frequency, move your PC to the area outside of

the interference range of 2.4 GHz Wireless LAN devices (40 meters/

43.74 yards or more) or stop transmitting from your PC. Please contact

TOSHIBA PC product support on Web site http://www.toshiba-europe.com/

computers/tnt/bluetooth.htm in Europe or http://

www.pcsupport.global.toshiba.com in the United States for more

information.

Bluetooth™ and Wireless LAN devices operate within the same radio

frequency range and may interfere with one another. If you use Bluetooth™

and Wireless LAN devices simultaneously, you may occasionally experience

a less than optimal network performance or even lose your network

connection. If you should experience any such problem, immediately turn off

either one of your Bluetooth™ or Wireless LAN. Please contact Toshiba PC

product support on Web site http://www.toshiba-europe.com/computers/tnt/

bluetooth.htm in Europe or http://www.pcsupport.global.toshiba.com in the

United States for more information.

Bluetooth wireless technology and your Health

The products with Bluetooth wireless technology, like other radio devices, emit

radio frequency electromagnetic energy. The level of energy emitted by devices

with Bluetooth wireless technology however is far much less than the

electromagnetic energy emitted by wireless devices like for example mobile

phones.

Because products with Bluetooth wireless technology operate within the

guidelines found in radio frequency safety standards and recommendations,

TOSHIBA believes Bluetooth wireless technology is safe for use by consumers.

These standards and recommendations reflect the consensus of the scientific

community and result from deliberations of panels and committees of scientists

who continually review and interpret the extensive research literature.

In some situations or environments, the use of Bluetooth wireless technology

may be restricted by the proprietor of the building or responsible representatives

of the organization. These situations may for example include:

❖Using the equipment with Bluetooth wireless technology on board of

airplanes, or

❖In any other environment where the risk of interference to other devices or

services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a

specific organization or environment (e.g. airports), you are encouraged to ask for

authorization to use the device with Bluetooth wireless technology prior to

turning on the equipment.

Regulatory statements

This product complies with any mandatory product specification in any country/

region where the product is sold. In addition, the product complies with the

following:

European Union (EU) and EFTA

This equipment complies with the R&TTE directive 1999/5/EC and has been

provided with the CE mark accordingly.

Canada — Industry Canada (IC)

This device complies with RSS 210 of Industry Canada.

Operation is subject to the following two conditions: (1) this device may not

cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of this device.”

L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1)

il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit étre prét à

accepter tout brouillage radioélectrique reçu, même si ce brouillage est

susceptible de compromettre le fonctionnement du dispositif.

The term “IC” before the equipment certification number only signifies that the

Industry Canada technical specifications were met.

Caution: FCC Interference Statement

This device complies with part15 of the FCC rules. Operation is subject to the

following two conditions:

❖This device may not cause harmful interference, and

❖This device must accept any interference received, including interference

that may cause undesired operation.

Note that any changes or modifications to this equipment not expressly approved

by the manufacturer may void the authorization to operate this equipment.

Caution: Exposure to Radio Frequency Radiation

The radiated output power of the Bluetooth™ Card from TOSHIBA is far below

the FCC radio frequency exposure limits. Nevertheless, the Bluetooth™ Card

from TOSHIBA shall be used in such a manner that the potential for human

contact during normal operation is minimized.

In order to comply with FCC radio-frequency radiation exposure guidelines for

an uncontrolled environment, the Bluetooth™ Card from TOSHIBA has to be

operated while maintaining a minimum body to antenna which are located on top

of LCD distance of 20 cm.

Refer to the Regulatory Statements as identified in the documentation that comes

with those products for additional information.

The Bluetooth™ Card from TOSHIBA is far below the FCC radio frequency

exposure limits.

Nevertheless, it is advised to use the Bluetooth™ Card from TOSHIBA in such a

manner that human contact during normal operation is minimized.

Changes or modifications made to this equipment not expressly approved by

TOSHIBA or parties authorized by TOSHIBA could void the user’s authority

to operate the equipment.

Taiwan

Article 14 Unless approved, for any model accredited low power radio frequency

electric machinery, any company, trader or user shall not change the

frequency, increase the power or change the features and functions of the

original design.

NOTE

NOTENOTE

The legal communications mentioned in the above item refer to radio

communications operated in accordance with telecommunication laws and

regulations.

Low power radio frequency electric machinery shall resist against interference

from legal communications or from industrial, scientific and medical radio

emission electric machinery.

Using this equipment in Japan

In Japan, the frequency bandwidth of 2,400 MHz to 2,483.5 MHz for second

generation low-power data communication systems such as this equipment

overlaps that of mobile object identification systems (premises radio station and

specified low-power radio station).

1. Sticker

Please put the following sticker on devices incorporating this product.

2. Indication

The indication shown below appears on this equipment.

12.4: This equipment uses a frequency of 2.4 GHz.

2FH: This equipment uses FH-SS modulation.

Article 17 Any use of low power radio frequency electric machinery shall not affect

the aviation safety and interfere with legal communications. In event that

any interference is found, the use of such electric machinery shall be

stopped immediately, and reusing of such products can be resumed until

no interference occurs after improvement.

2.4FH1

(1) (2) (3)

(4)

3The interference range of this equipment is less than 10m.

4This equipment uses a frequency bandwidth from 2,400 MHz to

2,483.5 MHz. It is impossible to avoid the band of mobile object

identification systems.

3. TOSHIBA Direct PC

Monday – Friday: 10:00 – 17:00

Toll Free Tel: 0120-13-1100

Direct Dial: 03-3457-5916

Fax: 03-5444-9450

Device Authorization

This device obtains the Technical Regulation Conformity Certification, and it

belongs to the device class of radio equipment of low-power data communication

system radio station stipulated in the Radio Law of Japan.

The Name of the radio equipment: EYXF2CS

TELECOM ENGINEERING CENTER

Approval Number: 01NYDA1305

The following restrictions apply:

❖Do not disassemble or modify the device.

❖Do not install the embedded wireless module into other device.

DVD-ROM, multi-function drive safety instructions

The DVD-ROM and multi-function drives employ a laser system. To ensure

proper use of this product, please read this instruction manual carefully and retain

for future reference. Should the unit ever require maintenance, contact an

authorized service location.

Use of controls, adjustments or the performance of procedures other than those

specified may result in hazardous radiation exposure.

To prevent direct exposure to the laser beam, do not try to open the enclosure.

Location of the required label

(Sample shown below. Location of the label and manufacturing information may

vary.)

This appliance contains a laser system and is classified as a “CLASS 1 LASER

PRODUCT.” To use this model properly, read the user’s guide carefully and keep it

for your future reference. In case of any trouble with this model, please contact your

nearest “AUTHORIZED service station.” To prevent direct exposure to the laser

beam, do not try to open the enclosure.

Use of controls or adjustments or performance of procedures other than those

specified in the owner’s manual may result in hazardous radiation exposure.

This guide is copyrighted by Toshiba America Information Systems, Inc. with all

rights reserved. Under the copyright laws, this guide cannot be reproduced in any

form without the prior written permission of Toshiba. No patent liability is

assumed, however, with respect to the use of the information contained herein.

Export Administration Regulation

This document contains technical data that may be controlled under the U.S.

Export Administration Regulations, and may be subject to the approval of the

U.S. Department of Commerce prior to export. Any export, directly or indirectly,

in contravention of the U.S. Export Administration Regulations is prohibited.

Notice

The information contained in this manual, including but not limited to any

product specifications, is subject to change without notice.

TOSHIBA CORPORATION AND TOSHIBA AMERICA

INFORMATION SYSTEMS, INC. (TOSHIBA) PROVIDES NO

WARRANTY WITH REGARD TO THIS MANUAL OR ANY OTHER

INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY

DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY

OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO

ANY OF THE FOREGOING. TOSHIBA ASSUMES NO LIABILITY

FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY

FROM ANY TECHNICAL OR TYPOGRAPHICAL ERRORS OR

OMISSIONS CONTAINED HEREIN OR FOR DISCREPANCIES

BETWEEN THE PRODUCT AND THE MANUAL. IN NO EVENT

SHALL TOSHIBA BE LIABLE FOR ANY INCIDENTAL,

CONSEQUENTIAL, SPECIAL, OR EXEMPLARY DAMAGES,

WHETHER BASED ON TORT, CONTRACT OR OTHERWISE,

ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL OR

ANY OTHER INFORMATION CONTAINED HEREIN OR THE USE

THEREOF.

Trademarks

Tecra and Noteworthy are registered trademarks, FreedomWare, and

SmartMedia are trademarks, of Toshiba America Information Systems, Inc. and/

or Toshiba Corporation.

Microsoft and Windows are registered trademarks of Microsoft Corporation in

the United States and/or other countries.

DirectX, Active Desktop, and DirectShow are registered trademarks, and

Windows Media is a trademark of Microsoft Corporation.

ConfigFree is a trademark of Toshiba Corporation.

Wi-Fi is a registered trademark of the Wireless Capability Ethernet Alliance.

Dolby - Manufactured by Toshiba under license from Dolby Laboratories/ Dolby

and the double-D symbol are trademarks of Dolby Laboratories.

TouchPad is a trademark of Synaptics, Inc.

All other brand and product names are trademarks or registered trademarks of

their respective companies.

Computer disposal information

This product contains mercury. Disposal of this material may be regulated due to

environmental considerations. For disposal, reuse or recycling information,

please contact your local government or the Electronic Industries Alliance at

www.eiae.org.

Contents

Introduction ..............................................................35

This guide .............................................................. 36

Safety icons ........................................................... 36

Other icons used.............................................. 37

Other documentation ............................................. 38

Service options ...................................................... 38

Chapter 1: Getting Started .........................................39

Selecting a place to work ....................................... 39

Creating a computer-friendly environment....... 39

Keeping yourself comfortable .......................... 40

Other precautions ........................................... 43

Important information on your computer’s

cooling fan ................................................. 45

Setting up your computer ...................................... 46

Setting up your software.................................. 46

Registering your computer with Toshiba ......... 47

Adding external devices ................................... 48

Connecting to a power source ............................... 48

Charging the main battery...................................... 51

Contents

Using the computer for the first time..................... 52

Opening the display panel................................ 52

Your computer’s features and specifications.... 53

Turning on the power ...................................... 53

Using the TouchPad™ ............................................ 54

Scrolling with the TouchPad™ ......................... 55

Using the Control buttons................................ 55

Disabling or enabling the TouchPad................. 56

Installing additional memory (optional) ................. 57

Removing a memory module........................... 61

Checking total memory.................................... 62

Using an external keyboard.................................... 63

Using a mouse....................................................... 63

Connecting a local printer ..................................... 64

Setting up your printer........................................... 65

Connecting an optional external diskette drive....... 68

Using external display devices ............................... 69

Connecting the display device.......................... 69

Directing the display output when you

turn on the computer ................................. 71

Adjusting the quality of the external display..... 72

Turning off the computer ....................................... 73

Closing the display panel ................................. 74

Caring for your computer....................................... 74

Cleaning the computer..................................... 74

Moving the computer....................................... 75

Using a computer lock ..................................... 75

Chapter 2: Learning the Basics ..................................77

Computing tips ...................................................... 77

Using the keyboard ................................................ 79

Character keys ................................................ 79

Making your keyboard emulate a full-size

keyboard .................................................... 79

Contents

Ctrl, Fn, and Alt keys ........................................ 80

Function keys................................................... 80

Windows

® special keys.................................... 81

Overlay keys .................................................... 81

Starting a program................................................. 83

Starting a program from the Start menu.......... 83

Starting a program from Windows® Explorer.. 84

Starting a program from the Run dialog box ... 85

Saving your work................................................... 86

Printing your work ................................................. 88

Backing up your work ............................................ 89

Restoring your work ........................................ 90

Using the DVD-ROM or multi-function drive.......... 90

Drive components and control buttons............ 91

DVD-ROM or multi-function drive

components............................................... 91

CD/DVD control buttons .................................. 92

Inserting a compact disc ................................. 93

Playing an audio CD......................................... 95

Playing CDs using Auto-Run............................ 96

Creating a CD................................................... 97

Viewing the contents of a CD or DVD............... 97

Removing a disc with the computer on ........... 98

Removing a disc with the computer off .......... 98

Caring for CD or DVD Discs ............................ 99

Powering down the computer................................ 99

Using Turn Off or Shut Down......................... 100

Using Hibernation ................................................ 103

Using Standby Mode............................................ 105

Toshiba’s online resources................................... 107

Contents

Chapter 3: Mobile Computing ................................. 108

Toshiba’s energy-saver design ............................. 108

Running the computer on battery power ............. 108

Battery Notice ................................................ 109

Power management ....................................... 110

Using additional batteries .............................. 110

Charging the batteries.......................................... 111

Charging the main battery.............................. 111

Charging the RTC battery............................... 112

Monitoring battery power .................................... 113

Determining remaining battery power............ 114

What to do when the battery runs low ........... 115

Setting battery alarms.................................... 116

Conserving battery power.............................. 116

Power profiles in Windows

® XP..................... 117

Using a hot key to set the power profile......... 118

Changing the main battery ................................... 119

Removing the battery from the computer ...... 119

Inserting the battery into the computer.......... 121

Taking care of your battery................................... 121

Safety precautions ......................................... 121

Maximizing battery life................................... 122

Disposing of used batteries ................................. 123

Traveling tips........................................................ 124

Chapter 4: Exploring Your Options .......................... 125

Exploring the desktop .......................................... 125

Finding your way around the desktop ............ 126

Setting up for communications............................ 129

Connecting your modem to a telephone line.. 131

Connecting your computer to a network ....... 132

An overview of using the Internet ........................ 135

The Internet ................................................... 135

The World Wide Web .................................... 136

Contents

Internet Service Providers.............................. 136

Connecting to the Internet ............................ 136

Surfing the Internet........................................ 137

Internet features............................................. 137

Uploading and downloading files from

the Internet ............................................. 138

Exploring audio features ...................................... 138

Recording sounds.......................................... 139

Using external speakers or headphones......... 140

Using the i.LINK

® port ......................................... 141

Inserting and removing hard drives ..................... 142

Inserting and Removing PC Cards ....................... 144

PC Card supporting software ......................... 144

Inserting a PC Card........................................ 145

Removing a PC Card...................................... 146

Setting up a PC Card for your computer ........ 146

Hot swapping................................................. 147

Chapter 5: Toshiba Utilities ..................................... 148

Fn-esse®.............................................................. 149

Starting Fn-esse®........................................... 149

Using the keyboard or pointing device to

assign keys .............................................. 151

Viewing existing key assignments.................. 152

Changing or removing existing key

assignments ........................................... 153

TOSHIBA Console ................................................ 153

Customizing your computer........................... 154

Network ......................................................... 154

Security.......................................................... 154

TOSHIBA Power Saver ................................... 154

Mouse utility ............................................... 157

Hotkey utility ............................................... 157

TOSHIBA HW Setup....................................... 158

Contents

Enabling Hibernation............................................ 160

Setting passwords ............................................... 160

Using an instant password............................. 161

Setting a user password ................................ 162

Disabling a user password............................. 162

Setting a supervisor password....................... 163

Deleting a supervisor password..................... 164

Using the TOSHIBA Zooming Utility..................... 165

Using the TOSHIBA Touch and Launch utility ...... 166

Chapter 6: If Something Goes Wrong ..................... 170

Problems that are easy to fix ............................... 170

Problems when you turn on the computer........... 172

The Windows

® operating system is not working.. 173

Using Startup options to fix problems ........... 174

Internet problems .......................................... 175

The Windows

® XP operating system can

help you ................................................... 175

Resolving a hardware conflict .............................. 176

A plan of action.............................................. 176

Resolving hardware conflicts on your own .... 177

Fixing a problem with Device Manager .......... 178

Memory problems ......................................... 180

Power and the batteries ................................. 181

Keyboard problems........................................ 182

Display problems ........................................... 183

Disk drive problems ....................................... 185

DVD-ROM or multi-function drive problems.. 188

Sound system problems ................................ 189

PC Card problems.......................................... 189

Printer problems............................................ 192

Modem problems........................................... 193

Develop good computing habits .......................... 194

If you need further assistance.............................. 195

Contents

Before you call ............................................... 195

Contacting Toshiba ........................................ 196

Other Toshiba Internet Web sites ........................ 197

Toshiba’s worldwide offices ................................. 197

Appendix A: Hot Keys ............................................. 199

Volume Mute........................................................ 199

Instant password security.................................... 200

Power usage profile ............................................ 200

Stand By mode .................................................... 201

Hibernation mode ............................................... 202

Display modes ..................................................... 203

Display brightness ............................................... 204

Disabling or enabling the TouchPad..................... 204

Keyboard hot keys .............................................. 204

Appendix B: Power Cable Connectors..................... 205

Appendix C: Using ConfigFree™ with your

Toshiba Computer ................................................... 206

Getting Started..................................................... 207

Starting ConfigFree ........................................ 207

ConfigFree Utilities............................................... 208

Connectivity Doctor ....................................... 208

Search for Wireless Devices .......................... 211

Profile Settings .............................................. 213

Quick Connect................................................ 215

Using the Automatic Switch................................. 218

Semi-Automatic Switch Feature........................... 219

Glossary ................................................................. 220

Index ....................................................................... 235

Introduction

Welcome to the world of powerful, portable multimedia

computing. With your Toshiba notebook computer, your

work can accompany you wherever you go.

Satellite® A55 Series computers provide considerable

computing power, enabling you to perform the most

demanding computing tasks from any location.

You will find your operating system, Microsoft® Windows

XP Home or Windows XP Professional, already installed on

your computer. Your operating system offers exciting features

and easy Internet access.

This guide contains information about your operating system

and how it functions with your Toshiba computer. For

specific information on the software, see the Microsoft

booklet that shipped with your computer.

Introduction

This guide

The product specifications and configuration information

are designed for a product Series. Your particular model

may not have all the features and specifications listed or

illustrated. For more detailed information about the

features and specifications on your particular model,

please visit Toshiba's Web site at

pcsupport.toshiba.com.

While Toshiba has made every effort at the time of

publication to ensure the accuracy of the information

provided herein, product specifications, configurations,

prices, system/component/options availability are all

subject to change without notice. For the most up-to-

date product information about your computer, or to stay

current with the various computer software or hardware

options, visit Toshiba's Web site at

pcsupport.toshiba.com.

This guide

This guide introduces the computer’s features. You can:

❖Read the entire guide from beginning to end

❖Skim through and stop when a topic interests you

❖Use the table of contents and the index to find specific

information

❖If you are new to computers, or have not used a notebook

computer before, read through the first couple of chapters

to familiarize yourself with the components of the

computer and how to turn it on. After that, seek out

whatever interests you most.

Safety icons

This manual contains safety instructions that must be

observed in order to avoid potential hazards that could result

in personal injuries, damage to your equipment, or loss of

NOTE

NOTENOTE

Introduction

Safety icons

data. These safety cautions have been classified according to

the seriousness of the risk, and the icons highlight these

instructions as follows:

Indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not

avoided, may result in property damage.

Provides important information.

Other icons used

Additional icons highlight other helpful or educational

information:

TECHNICAL NOTE: This icon indicates technical informatio

about the computer.

NOTE

NOTENOTE

Introduction

Other documentation

Your computer comes with the following documentation.

❖This electronic version of the user’s guide.

❖Guides for other programs that may come preinstalled on

your computer or that are available for installation on

your Recovery media.

❖For accessory information, visit Toshiba's Web site at

accessories.toshiba.com.

❖The Microsoft

® Windows operating system

documentation which explains the features of the

operating system.

Service options

Toshiba offers a full line of service options built around its

Toshiba Services limited warranty programs. To stay current

on the most recent software and hardware options for your

computer, and for other product information, be sure to

regularly check the Toshiba Web site at

pcsupport.toshiba.com.

If you have a problem or need to contact Toshiba, see “If

Something Goes Wrong” on page 170.

Chapter 1

Getting Started

This chapter provides tips for working comfortably, describes

how to connect components, and explains what to do the first

time you use your computer.

Selecting a place to work

Your computer is designed to be used in a variety of locations

and situations. This section provides guidelines for setting up

your computing environment.

Creating a computer-friendly environment

Place the computer on a flat surface that is large enough for

the computer and any other items you need to use, such as a

printer. Leave enough space around the computer and other

equipment to give adequate ventilation, otherwise, they may

overheat.

To keep your computer in prime operating condition, protect

your work area from:

❖Dust, moisture and direct sunlight

Getting Started

Selecting a place to work

❖Equipment that generates a strong electromagnetic field,

such as large stereo speakers (other than speakers that are

connected to the computer) or speakerphones.

❖Rapid changes in temperature or humidity and sources of

temperature change such as air conditioner vents or

heaters.

❖Extreme heat, cold, or humidity.

❖Liquids and corrosive chemicals

If you spill liquid into the computer, turn it off, unplug it from

the AC power source and let it dry out completely before

turning it on again.

If the computer does not operate properly after you turn it back

on, contact a Toshiba service representative or your network

administrator.

Keeping yourself comfortable

Strain and stress injuries are becoming more common as

people spend more time using their computers. However,

with a little care and the proper use of the equipment, you can

work comfortably throughout the day.

Using the computer keyboard incorrectly can result in

discomfort and possible injury. If your hands, wrists, and/or

arms hurt while typing, stop using the computer and rest. If the

discomfort persists, consult a physician.

This section provides hints on avoiding strain and stress

injuries. For more information, consult books on ergonomics,

repetitive-strain injury, and repetitive-stress syndrome.

Getting Started

Selecting a place to work

Placement of the computer

Proper placement of the computer and external devices is

important to avoid stress-related injuries. Consider the

following when placing your computer.

❖Place the computer on a flat surface at a comfortable

height and distance. You should be able to type without

twisting your torso or neck and look at the screen without

slouching.

❖If you use an external monitor, the top of the screen

should be no higher than eye level.

❖If you use a paper holder, set it at the same height and

distance as the screen.

Seating and posture

When using your computer, maintain good posture with your

body relaxed and your weight distributed evenly. Proper

seating is a primary factor in reducing work strain. Some

people find a backless chair more comfortable than a

conventional chair. Whichever type you choose, use the

following guidelines to adjust your chair for maximum

computing comfort.

Correct posture and positioning of the computer

❖Position your chair so that the keyboard is at or slightly

lower than the level of your elbow. You should be able to

Below eye level

Footrest

Approximately

90° angles

Getting Started

Selecting a place to work

type comfortably with your shoulders relaxed and your

forearms parallel to the floor.

If you are using a conventional chair:

❖Your knees should be slightly higher than your hips. If

necessary, use a footrest to raise the level of your knees

and ease the pressure on the back of your thighs.

❖Adjust the back of your chair so that it supports the lower

curve of your spine. If necessary, use a cushion to provide

extra back support. Lower-back-support cushions are

available at many office supply stores.

❖Sit with your back straight so that your knees, hips, and

elbows form approximately 90-degree angles when you

work. Do not slump forward or lean back too far.

Lighting

Proper lighting can improve the readability of the display and

reduce eyestrain.

❖Position the display panel or external monitor so that

sunlight or bright indoor lighting does not reflect off the

screen. Use tinted windows or shades to reduce glare.

❖Avoid placing your computer in front of a bright light that

shines directly into your eyes.

❖If possible, use soft, indirect lighting in your computer

work area.

Your LCD display has a brightness approaching that of a TV

device. We recommend that you adjust the brightness of your

LCD to a comfortable level to prevent possible strain on your

eyes.

Getting Started

Selecting a place to work

Arms and wrists

❖Avoid bending, arching, or twisting your wrists. Keep

them in a relaxed, neutral position while typing.

❖Exercise your hands, wrists and arms to improve

circulation.

Work habits

The key to avoiding discomfort or injury from strain is to

vary your activities. If possible, schedule a variety of tasks

into your working day. Finding ways to break up the routine

can reduce stress and improve your efficiency.

❖Take frequent, short breaks to change position, stretch

your muscles, and relieve your eyes. A break of two or

three minutes every half hour is more effective than a

long break after several hours.

❖Avoid performing repetitive activities for long periods.

Intersperse such activities with other tasks.

❖Focusing your eyes on your computer screen for long

periods can cause eyestrain. Look away from the

computer frequently and focus your eyes on a distant

object for at least 30 seconds.

Your LCD display has a brightness approaching that of a TV

device. We recommend that you adjust the brightness of your

LCD to a comfortable level to prevent possible strain on your

eyes.

Other precautions

Your computer is designed to optimize safety, minimize

strain, and withstand the rigors of portability. However, you

should observe certain precautions to further reduce the risk

of personal injury or damage to the computer.

Getting Started

Selecting a place to work

❖Avoid prolonged physical contact with the underside of

the computer.

If the computer is used for long periods, its case can become

very warm. While the temperature may not feel too hot to the

touch, if you maintain physical contact with the computer for

a long time (if you rest the computer on your lap, for

example), your skin might suffer low-heat injury.

Do not apply heavy pressure to the computer or subject it to

sharp impacts. Excessive pressure or impact can damage

computer components or cause your computer to malfunction.

Some PC Cards can become hot with prolonged use. If two

cards are installed, both can become hot even if only one is

used extensively. Overheating of a PC Card can result in errors

or instability in the PC Card operation.

Be careful when you remove a PC Card that has been used for

lengthy periods of time.

❖Avoid spilling liquids into the computer’s keyboard.

If you do spill a liquid that gets into the keyboard, turn off the

computer immediately. Leave the computer turned off

overnight to let it dry out before you use it again.

❖Never turn off the computer if a drive light indicates a

drive is active.

Turning off the computer while it is reading from or writing to

a disk may damage the disk, the drive, or both.

❖Keep the computer and disks away from objects that

generate strong magnetic fields, such as large stereo

speakers.

Getting Started

Selecting a place to work

Information on disks is stored magnetically. Placing a magnet

too close to a disk can erase important files.

❖Scan all new files for viruses.

This precaution is especially important for files you receive

via email or download from the Internet. Occasionally, even

new programs you buy from a supplier may contain a

computer virus. You will need a special program to check for

viruses. Ask your dealer to help you.

Important information on your computer’s cooling fan

Your computer may have a CPU cooling fan that cools the

CPU by drawing outside air into the computer. The cooling

fan may be located on the bottom of the computer.

To prevent possible overheating of the CPU, make sure the air

intake on the cooling fan is not blocked. The fan draws in air

by creating a vacuum. If the fan is blocked, it could cause the

CPU to run at a lower performance level or cause the computer

to shut down. Loose items such as notebook and tissue paper,

plastic wrappers, or other similar materials can block the air

intake, preventing air from reaching the CPU. Do not use the

computer on surfaces with objects that can be drawn in by the

cooling fan.

The cooling fan location will vary depending on the computer.

NOTE

NOTENOTE

Getting Started

Setting up your computer

TECHNICAL NOTE: You must complete all set up steps up to

“Setting up your software” on page 46 before adding external

or internal components to your computer. These components

include, but are not limited to, a mouse, keyboard, printer,

memory, and PC Cards.

Your computer comes with a rechargeable battery pack that

must be charged before you can use it.

To use external power or to charge the battery, you must

attach the AC adapter. See “Connecting to a power source”

on page 48.

Setting up your software

The first time you turn on your computer, the Setup Wizard

guides you through steps to set up your software.

1From the welcome screen, click Next to enter the Setup

Wizard.

2Confirm acceptance of Microsoft’s End User License

Agreement and click Next.

3Enter the computer name and description and click Next

or Skip.

The computer will pause for a moment while checking for an

Internet connection, and you will see the screen “Checking

your Internet connectivity.”

A window displays the message: “How will this computer

connect to the Internet?” The system displays three selections:

Telephone modem, Digital subscriber line (DSL) or cable, or

local area network (LAN).

Getting Started

Setting up your computer

4Click Skip to exit the process or Next to continue.

To register online, your computer must be connected to the

Internet via a voice-grade telephone line or a local area

network (LAN).

A window displays, asking if you wish to register with

Toshiba and Microsoft.

5Click Yes to register, or No to exit the process.

If you click No, you may register with Toshiba by clicking the

6If you selected Yes in step 5, enter your personal

information in the registration window.

A window displays the message, “Who will use this

computer?”

7Enter your name and click Next to complete the process.

A window displays the message, “Thank you.”

8Click Finish to continue.

Your computer restarts automatically.

Registering your computer with Toshiba

Product registration is strongly recommended, and allows

Toshiba to send Customer periodic updates, announcements,

and special offers applicable to the product. Product

registration can be completed during the initial start up

process of your computer. If you opt not to register at that

time, you can either double-click the icon on your desktop or

go to the Toshiba Web site at www.register.toshiba.com.

Customer failure to complete Product Registration will not

diminish Customer rights under this limited Warranty.

NOTE

NOTENOTE

NOTE

NOTENOTE

Getting Started

Connecting to a power source

Adding external devices

Before adding external devices, Toshiba recommends setting

up your software. See “Setting up your software” on page 46.

Before starting to use your computer, you may also want to:

❖Add more memory (see “Installing additional memory

(optional)” on page 57)

❖Connect a mouse (see “Using a mouse” on page 63)

❖Connect an external display device (see “Using external

display devices” on page 69)

❖Connect a local printer (see “Connecting a local printer”

on page 64)

❖Install PC Cards (see “Inserting and removing PC Cards”

on page 153)

Connecting to a power source

Your computer requires power to operate. Use the power

cable and AC adapter to connect the computer to a live

electrical outlet, or to charge the computer’s battery.

Sample power cable and AC adapter

NOTE

NOTENOTE

AC adapter

Power cable

Getting Started

Connecting to a power source

Hold the power cable by its plug when you connect/disconnect

it. Do NOT pull the cable itself. Doing so may damage the

power cable and result in a short circuit or electric shock.

When you connect the AC adapter to the computer, always

follow the steps in the exact order as described in the User's

Manual. Connecting the power cable to a live electrical outlet

should be the last step; otherwise’ the adapter DC output plug

could hold an electrical charge and cause an electrical shock

or minor bodily injury when touched. As a general safety

precaution, avoid touching any metal parts.

Use only the AC adapter supplied with your computer or an

equivalent adapter that is compatible. Use of any incompatible

adapter could damage your computer. Toshiba assumes no

liability for any damage caused by use of an incompatible

adapter.

To connect AC power to the computer:

1Connect the power cable to the AC adapter.

Sample connecting the power cable to the AC adapter

Getting Started

Connecting to a power source

Handling the cord on this product will expose you to lead, a

chemical known to the State of California to cause birth defects

or other reproductive harm. Wash hands after handling.

2Plug the AC adapter into the DC-IN on the right side of

the computer.

Sample connecting the AC adapter to the computer

3Connect the power cable to a live electrical outlet.

If the electrical outlet is live, the system indicator panel’s AC

power light ( ) glows green.

If the main battery is present, the battery light glows:

❖Amber while the battery is charging

❖Green when the battery is fully charged

If the battery light flashes amber during charging, either the

battery pack is malfunctioning, or it is not receiving input

from the AC power supply. Disconnect the AC cable and

remove the battery pack. See “If Something Goes Wrong” on

page 170 for troubleshooting information.

__ +

Getting Started

Charging the main battery

Damaged power cables can cause fire or electric shock. Never

modify, forcibly bend, place heavy objects on top of, or apply

heat to the power cable.

If the power cable becomes damaged or the plug over-

heats, discontinue use. There is a risk of electric shock.

Never remove the power plug from the outlet with wet hands.

Doing so may cause an electric shock.

Charging the main battery

To charge the main battery, plug the computer into a live wall

outlet. It takes several hours to charge the battery with the

computer off. It takes much longer to charge the battery while

the computer is on. For more information on battery use, see

“Running the computer on battery power” on page 108.

Once the battery is charged for the first time, avoid leaving the

computer plugged in and turned off for more than a few hours

at a time. Continuing to charge a fully charged battery can

damage the battery.

TECHNICAL NOTE: When your computer is using all of the

power provided by the AC Adaptor to run applications,

features, and devices, the recharging of the battery can not

occur. Your computer's Power Saver utility can be used to

select a power level setting that reduces the power required for

system operation and will allow the battery to recharge.

Getting Started

Using the computer for the first time

Battery life and charge time may vary depending on the

applications, power management settings, and features used.

Using the computer for the first time

The computer is now ready for you to turn it on and begin

using it.

Opening the display panel

1Slide the display latch to the right.

2Lift the display panel.

Sample opening the display panel

To avoid damaging the display panel, do not force it beyond

the point where it moves easily. Never lift or move the

computer using the display panel.

Small bright dots may appear on your TFT display when you

turn on your computer. Your display contains an extremely

large number of thin-film transistors (TFT) and is

manufactured using high-precision technology. Any small

bright dots that may appear on your display are an intrinsic

characteristic of the TFT manufacturing technology.

NOTE

NOTENOTE

Getting Started

Using the computer for the first time

Over a period of time, and depending on the usage of the

computer, the brightness of the LCD Screen will deteriorate.

This is an intrinsic characteristic of LCD technology.

Screen will dim when the computer is operated on battery

power and you may not be able to increase the brightness of

the screen.

Your computer’s features and specifications

Certain notebook chassis are designed to accommodate all

possible configurations for an entire product Series. Your

selected model may not have all the features and

specifications corresponding to all of the icons or switches

shown on the notebook chassis, unless you have selected all

those features.

Below are examples of some of the many possible icons used

on your computer:

Sample system icons

This information applies to all the features and icons

described in this guide.

Turning on the power

To turn on the computer:

1Make sure any external devices (such as the AC adapter, if

you plan to use AC power rather than battery power) are

properly connected and ready.

2Check to ensure that all drives are empty.

NOTE

NOTENOTE

Getting Started

Using the TouchPad™

3Press and hold the power button in until the on/off light

on the system indicator panel glows green—about one

second.

Sample turning on the power

4The preinstalled operating system will load

automatically.

When you turn on the computer for the first time, do not turn

off the power again until the operating system has loaded

completely.

Never turn off the computer while any drive is in use.

Using the TouchPad™

The TouchPad, the small, smooth square cutout located in

front of the keyboard, is sensitive to touch and enables you to

move the cursor with the stroke of a finger. Simply move

your finger on the TouchPad in the direction you would like

to move the cursor:

❖To move the cursor to the top of the page, push your

finger forward on the TouchPad.

Getting Started

Using the TouchPad™

❖To move the cursor to the bottom of the page, drag your

finger toward yourself.

❖To move the cursor to the right side of the page, slide

your finger across the TouchPad from left to right.

❖To move it to the left side, slide your finger from right to

left.

Because the TouchPad is much smaller than the display

screen, moving your cursor across the screen often means

having to move your finger several times across the TouchPad

in the preferred direction.

Once you have positioned your cursor, you can either click it

into place by double-tapping the TouchPad or clicking the

control buttons.

Scrolling with the TouchPad™

There are two active regions on the TouchPad that allow you

to scroll as you would with any wheel device on a mouse or

trackball.

To scroll vertically, run your finger up or down along the right

edge of the TouchPad. To scroll horizontally, run your finger

along the bottom edge of the TouchPad.

Using the Control buttons

When a step instructs you to click or choose an item, move

the cursor to the item, then press and release the primary

(left-hand) button. To double-click, press the primary button

twice in rapid succession. The primary button usually

corresponds to the left mouse button.

The function of the secondary (right-hand) button depends on

the program you are using. It usually corresponds to the right

mouse button. Check your program’s documentation to find

whether it uses the right mouse button.

NOTE

NOTENOTE

Getting Started

Using the TouchPad™

Disabling or enabling the TouchPad

The TouchPad is enabled by default. To change the enable/

disable TouchPad setting:

1Click Start, Control Panel.

The Control Panel window appears.

2Click Printers and Other Hardware.

3Click the Mouse icon or press the Fn + F9 hot keys.

4Click the TouchPAD ON/OFF tab.

The TouchPAD ON/OFF tab view window appears.

5Select Disable or Enable, whichever is appropriate.

6Click Apply.

7Click OK.

The Mouse Properties window closes.

8Close the Printers and Other Hardware window.

Getting Started

Installing additional memory (optional)

9Close the Control Panel window.

The Fn + F9 shortcut can be used to disable or enable the

TouchPad. See “Disabling or enabling the TouchPad” on

page 204.

Installing additional memory (optional)

HINT: To purchase additional memory modules, see the

accessories information packaged with your system or visit

accessories.toshiba.com.

Before you install or remove a memory module, turn off the

computer using the Start menu. If you install or remove a

memory module while the computer is in Stand by or

Hibernation mode, data will be lost.

Your computer comes with enough memory to run most of

today’s popular applications. You may want to increase the

computer’s memory if you use complex software or process

large amounts of data.

Additional memory comes in various capacities (to stay

current on the most recent software and hardware options for

your computer, and for other product information, be sure to

regularly check the Toshiba Web site at

accessories.toshiba.com).

There are two memory slots. Depending on your system

configuration, both slots may be occupied.

NOTE

NOTENOTE

Getting Started

Installing additional memory (optional)

Before you install or remove a memory module, turn off the

computer using the Start menu. If you install or remove a

memory module while the computer is in Standby or

Hibernation mode, data will be lost.

A memory module must be installed in slot A. do not try

to operate the computer with a memory module in slot B

only.

If you install a memory module that is incompatible with the

computer, a beep will sound when you turn on the computer. If

the module is installed in slot A, thee will be a long beep

followed by a short beep. If the module is in slot B, there will

be a long beep followed by two short beeps. In this case, turn

off the computer and remove the incompatible module.

If you use the computer for a long time, the memory modules

become hot. If this happens, let the memory modules cool to

room temperature before you replace them.

You need a standard Phillips no.1 screwdriver for this

procedure.

To avoid damaging the computer’s screws, use a standard

Phillips no. 1 screwdriver that is in good condition.

If the computer is on, begin at step 1; otherwise, skip to step

1If the computer is on, click Start, Turn off computer.

The Turn off computer window appears.

2Click Turn Off.

The operating system turns off the computer.

Getting Started

Installing additional memory (optional)

3Unplug and remove any cables connected to the

computer.

4Close the display panel and turn the computer upside

down to locate the expansion memory module slot cover.

Sample locating the memory module slot cover

5Remove the battery. For information on removing the

battery, see “Changing the main battery” on page 119.

6Using a standard Phillips no. 1 screwdriver, unscrew the

screw that secures the memory module slot cover, then

remove the memory slot cover.

Sample removing the memory module slot cover

Memory module slot cover

Getting Started

Installing additional memory (optional)

7Place the screw and the cover in a safe place so that you

can retrieve them later.

Static electricity can damage the memory module. Before you

handle the module, touch a grounded metal surface to

discharge any static electricity you may have built up.

To avoid damaging the memory module, be careful not to

touch its pin connector (on the side you insert into the

computer).

8Remove the new memory module from its antistatic

packaging.

9Holding the memory module by its edges so that the gold

connector bar faces the slot, fit the module into the

socket.

10 Gently press down on the memory module connector

until the clips snap into place.

Do not force the memory module into position. The memory

module should be level when secured in place.

Sample inserting the memory module into the slot

Getting Started

Installing additional memory (optional)

Avoid touching the connectors on the memory module or on

the computer. Grease or dust on the connectors may cause

memory access problems.

11 Replace the memory module slot cover.

12 Retighten the screws.

13 Turn the computer over and reconnect any cables you

removed.

14 Turn on the computer.

15 If the computer does not recognize the memory, shut

down the computer, remove the memory slot cover, and

make sure the memory module is seated properly, as

described in step 10.

You can now continue setting up the computer. When the

operating system has loaded, you can verify that the

computer has recognized the additional memory module.

Removing a memory module

1Complete steps 1 7– in “Installing additional memory

(optional)” on page 57 to shut down the computer and open

the memory module slot cover.

2Gently push the memory locks outward until the memory

module pops up.

3Carefully pull the memory module diagonally to remove

it from the slot.

Getting Started

Installing additional memory (optional)

Sample removing the memory module

4Complete the procedure by following steps 11 through 14

in “Installing additional memory (optional)” on page 57.

Checking total memory

When you add or remove a memory module, you can check

that the computer has recognized the change. To do this:

1Click Start, then click Control Panel.

2Click Performance and Maintenance.

3Click System.

4The General tab view automatically appears and shows

total memory.

If the computer does not recognize the memory

configuration, turn off the computer, remove the memory slot

cover, and make sure the memory module is seated properly,

as described in step 10 of “Installing additional memory

(optional)” on page 57.

Getting Started

Using an external keyboard

If you prefer to use a full-size keyboard, you can attach one to

your computer. The computer’s USB ports support any USB-

compatible keyboard.

To connect a USB keyboard, connect the keyboard cable to

the USB port on the computer. Once connected, the keyboard

is ready to use.

Using a mouse

You may want to use a mouse instead of the computer’s built-

in TouchPad. You can use a USB-compatible mouse.

After logging on to your system, the mouse cursor may move

to the upper-right side of the screen. If this occurs, push the

Esc or Windows key to return it to its original position.

TECHNICAL NOTE: With a USB mouse, you can choose to

have the TouchPad active at the same time.

To connect a USB mouse, connect the mouse cable to the

USB port on the computer. Once connected, the mouse is

ready to use.

NOTE

NOTENOTE

Getting Started

Connecting a local printer

Before you can connect a printer, you need a suitable USB

printer cable, which may have been provided with your

printer. Otherwise, you can purchase one from a computer or

electronics store.

Your printer documentation may require you to install the

printer software before physically connecting the printer to

your computer. If you do not install the software as instructed

by the printer manufacturer, the printer may not function

correctly.

Never connect the printer cable while the computer’s power is

on. Doing so may damage the printer, the computer, or both.

Read the documentation that came with your printer. Follow

the manufacturer’s instructions when connecting a local

printer.

You must supply the proper printer cable. If one did not come

with your printer, you may purchase one from an electronics or

computer store.

These instructions assume you have a USB printer, consult

the document that came with your printer.

NOTE

NOTENOTE

NOTE

NOTENOTE

Getting Started

Setting up your printer

To connect the printer:

1If the computer is on, turn it off.

2Connect the printer cable to the printer and then connect

the other end to one of the computer’s USB ports.

3Plug the printer’s power cable into a live electrical outlet.

4See your printer documentation for additional

configuration steps.

For more information on getting your printer to print, see

“Printing your work” on page 88.

Setting up your printer

Setting up a printer involves selecting a printer driver. This

special program acts as a translator that turns your document

into a form the printer can understand.

If you are using any non-Windows programs, set up a printer

driver for each of those programs. Refer to your program’s

documentation for more information.

TECHNICAL NOTE: If you have the manufacturer’s disk that

came with your printer, you can use it to install the printer on

your computer. The manufacturer’s disk may include additional

drivers and fonts.

To set up a printer with the Add Printer Wizard:

1Click Start, and click Printers and Faxes.

The operating system opens a Printers and Faxes window.

Getting Started

Setting up your printer

Sample Printers and Faxes window

2Click Add Printer.

The Add Printer Wizard appears.

Sample Add Printer Wizard dialog box

3Click Next.

Getting Started

Setting up your printer

The Add Printer Wizard asks you to select your printer.

TECHNICAL NOTE: If your printer is Plug and Play, the

Windows XP operating system recognizes it automatically. You

can ignore the remainder of this section. See your printer

manual.

4If the printer you are setting up:

❖Is not connected to a network, select Local printer

attached to this computer.

❖Is connected to a network, select Network printer, or a

printer attached to another computer.

5Click Next.

The Add Printer Wizard looks for a Plug and Play printer. If it

does not locate one, click Next.

The Add Printer Wizard prompts you for the printer port.

6Select the port settings according to the instructions in

your printer’s documentation and the port to which your

printer is connected, then click Next.

The wizard prompts you to select your printer.

7From the list of manufacturers and printers, select your

printer, then click Next.

The Add Printer Wizard prompts you to enter a “friendly”

printer name.

8Enter a name for your printer.

HINT: If you are using more than one printer, make sure the

name is descriptive enough to help you tell the difference.

9If you want this printer to be:

Getting Started

Connecting an optional external diskette drive

❖The default printer, click Ye s .

❖Available when specifically requested, click No.

10 Click Next.

11 Click Finish.

The Windows XP operating system prints a test page.

12 To complete the setup, click OK.

You are now ready to print.

Depending on your program, you may see various messages

indicating the status of your print job.

TECHNICAL NOTE: Some printers require a specific

installation process. In this case, the Windows XP operating

system Add Printer Wizard will display an error message. If

this happens, refer to your printer installation guide for further

instructions.

Connecting an optional external diskette drive

Some operations, such as creating a password service

diskette, require a diskette drive designed for use with 3.5-

inch diskettes.

Sample optional external USB diskette drive

Getting Started

Using external display devices

To connect an optional external USB diskette drive, connect

the cable to one of the computer’s USB ports.

Sample connecting an optional external USB diskette drive

Using external display devices

Your computer comes with a built-in LCD display, but you

can also connect two different types of external display

devices to one of two available video ports:

❖A video display device, such as a video projection unit,

via the S-video port.

❖An external monitor or projector via the RGB (monitor)

port.

❖A television or video display device via the S-video port.

Before connecting a television, video projector, monitor or

other display device, configure your computer for the type of

device you are connecting. To do this, refer to the

documentation for your operating system and devices.

Connecting the display device

If you are connecting a television or other video display

device to the computer’s S-video port, first refer to “Selecting

video cables” below for guidelines on choosing a video cable,

then refer to “Connecting to the S-video port” below.

If you are connecting an SVGA monitor, skip to “Connecting

an external monitor or projector” on page 71.

Getting Started

Using external display devices

Selecting video cables

To connect a device to the S-video port, you will need to

purchase a cable. For the best video quality, always use a

properly shielded cable.

HINT: Toshiba recommends using a cable no longer than

20 feet (approximately 6 meters).

Using a poor quality cable may result in a dull or fuzzy

picture, poor color, ghosting, video noise, or loss of video.

Connecting to the S-video port

Video cables are not included with your computer. To connect

a device to the video-out port, you will need to purchase an S-

video cable.

To connect the device:

1Connect one end of the video cable to the external video

device.

Refer to the documentation provided with the device for the

location of its video-in port.

2Connect the other end of the video cable to the S-video

port on the back of the computer.

3Turn on the external video device.

4Set the display mode by pressing Fn + F5, or by setting the

Display Properties settings. For more information, see

NOTE

NOTENOTE

Getting Started

Using external display devices

“Directing the display output when you turn on the

computer” on page 71.

TECHNICAL NOTE: If you are connecting to a television, you

may need to change the display properties. Most televisions

use or support an 800 x 600 standard resolution.

Connecting an external monitor or projector

You can easily attach an external monitor or projector to your

computer if you need a larger screen. To do this:

1Connect the monitor’s video cable to the RGB (monitor) port

on the left side of the computer.

2Connect the device’s power cable to a live electrical

outlet.

3Turn on the external device.

4Set the display mode by pressing Fn + F5, or by setting the

Display Properties settings.

Directing the display output when you turn on the computer

Once you have connected an external display device, you can

choose to use the internal display only, the external device

only, or both simultaneously. The quickest way to change the

display output settings is to use the display hot key (Fn F5 + ):

1Press Fn F5 and simultaneously.

2While holding down Fn F5, press repeatedly until the

setting you want takes effect.

This hot key cycles through the settings in the following

order:

❖Built-in display only

❖Built-in display and external monitor simultaneously

Getting Started

Using external display devices

❖External monitor only

❖Built-in display and TV (or other external video device)

simultaneously

❖TV (or other external video device) only

3Release the Fn key.

TECHNICAL NOTE: You can also ttings using change these se

the Display Properties Box.

Set the option for the video controller by clicking Start, then

Control Panel and clicking Display. Choose the Settings tab,

click the Advanced button, select Display Device, select the

applicable Monitor type, click Apply or OK.

For more information on switching the display output, see

“Directing the display output when you turn on the

computer” on page 71.

Adjusting the quality of the external display

To obtain the best picture quality from your television (or

other video display device), you may need to adjust the video

settings. See the video device documentation for additional

configuration steps.

TECHNICAL NOTE: In order to use one of the simultaneous

modes, you must set the resolution of the internal display

panel to match the resolution of the external display device.

The external display device must support a resolution of 640 X

480 or higher.

Getting Started

Turning off the computer

It is a good idea to turn off your computer when you are not

using it for a while.

If you are using the computer for the first time, leave the

computer plugged into a power source (even though the

computer is off) to fully charge the main battery. With the

computer off, it may take up to three hours to recharge the

main battery.

When you power down the computer, you have three options

to choose from: Turn Off (or Shut down), Hibernate, and

Standby. Each option has its advantages.

❖Use the Turn Off command if you are using the Windows

XP Home version operating system, or the Windows XP

Professional operating system when not connected to a

domain server.

❖Use the Shut down command if you are using the

Windows XP Professional operating system and are

connected to a domain server.

❖If you have work in progress and are not connected to a

network, use the Windows Standby or Hibernate

commands to save your system settings to memory so

that, when you turn on the computer again, you will

automatically return to where you left off.

❖To leave the computer off for a longer period, you can use

the Windows Turn Off command when not connected to

a domain server or the Shut down when connected to a

domain server instead.

Never turn off the computer while any drive is in use. Doing so

may damage the media in use and result in loss of data. For

more information, see “Powering down the computer” on

page 99.

Getting Started

Caring for your computer

Closing the display panel

When you are finished, shut the computer down and close the

display panel to keep dust and dirt out of the computer.

If you close the computer while it is still on, these actions will

occur:

❖If you have the LCD power-saver feature set, the LCD

panel will automatically turn off until you open it again.

❖If you have the audible warning set, the computer will

beep to notify you that it is still on.

❖If you have an action feature set, the computer will

perform either: Nothing, Standby, Hibernate, or Turn Off

(see “Enabling Hibernation” on page 160).

Caring for your computer

This section gives tips on cleaning and moving your

computer. For information about taking care of your

computer’s battery, see “Running the computer on battery

power” on page 108.

Cleaning the computer

Keep liquids, including cleaning fluid, out of the computer’s

keyboard, speaker, and other openings. Never spray cleaner

directly onto the computer. Never use harsh or caustic

chemical products to clean the computer.

To keep your computer clean, gently wipe the display panel

and exterior case with a lightly dampened cloth. Ask your

Toshiba dealer for suggestions for appropriate cleaning

products.

Getting Started

Caring for your computer

Moving the computer

Before moving your computer, even across the room, make

sure all disk activity has ended (the drive indicator light stops

glowing) and all external peripheral cables are disconnected.

Do not pick up the computer by its display panel or by the

back (where the ports are located).

Although your notebook computer is built to withstand

reasonable shock and vibration, transport it in a carrying case

for long trips. You can purchase a carrying case from your

Toshiba dealer, through the accessories information packaged

with your system, or visit accessories.toshiba.com.

Using a computer lock

For your own peace of mind, you may want to secure your

computer to a heavy object such as your desk. The easiest

way to do this is to purchase an optional PORT-Noteworthy®

Computer Lock Cable.

Sample PORT-Noteworthy® Computer Lock Cable

To secure the computer:

1Loop the cable through or around some part of a heavy object.

Make sure there is no way for a potential thief to slip the cable

off the object.

2Pass the locking end through the loop.

Getting Started

Caring for your computer

3Insert the cable’s locking end into the security lock slot

on the left side of the computer, then give the key a

quarter turn and remove it.

The computer is now securely locked.

Sample locking the computer

Chapter 2

Learning the Basics

This chapter gives some computing tips and provides

important information about basic features.

Computing tips

❖Save your work frequently.

Your work stays in the computer’s temporary memory until

you save it to the disk. If the network you are using goes down

and you must restart your computer to reconnect, or your

battery runs out of charge while you are working, you will

lose all work since you last saved.

See “Saving your work” on page 86 for further information.

HINT: Some programs have an automatic save feature that can

be activated. This feature saves your file to the hard disk at

preset intervals. See your software documentation for details.

Learning the Basics

Computing tips

❖Back up your files to disks (or other removable media) on

a regular basis. Label the backup copies clearly and store

them in a safe place.

If your hard disk suddenly fails, you may lose all the data on it

unless you have a separate backup copy.

❖Use Error-checking and Disk Defragmenter regularly to

conserve disk space and improve performance. Consult

your operating system documentation for more

information on these and other utilities.

❖Scan all new files for viruses. This precaution is

especially important for files you receive via diskette,

email, or download from the Internet.

❖Take frequent breaks to avoid repetitive-motion injuries

and eyestrain.

❖Do not turn off the computer if a drive indicator light

indicates a drive is active.

Turning off the computer while it is reading from or writing to

a disk may damage the disk, the drive, or both.

❖Before turning off the computer, use the Turn off

computer command or Standby command. See

“Powering down the computer” on page 99 to learn more

about Standby.

The operating system records information, such as your

desktop setup, during its shutdown procedure. If you do not let

the operating system shut down normally, details such as new

icon positions may be lost.

NOTE

NOTENOTE

Learning the Basics

Using the keyboard

Your computer’s keyboard contains character keys, control

keys, function keys, and special Windows keys, providing all

the functionality of a full-size keyboard.

Sample keyboard

Character keys

Typing with the character keys is very much like typing on a

typewriter, except that:

❖The space bar creates a space character instead of just

passing over an area of the page.

❖The lowercase letter l (el) and the number 1 are not

interchangeable.

❖The uppercase letter O and the number 0 are not

interchangeable.

❖The Caps Lock key changes only the alphabet keys to upper

case — the number and symbol keys are not affected.

The caps lock light on the keyboard indicator panel

illuminates when you press the Caps Lock key.

Making your keyboard emulate a full-size keyboard

Although your computer’s keyboard layout is compatible

with a standard full-size keyboard, it has fewer keys.

A standard full-size keyboard has two Enter, Ctrl, and Alt keys;

editing keys; cursor positioning keys; and a numeric keypad.

Pressing the Fn key simultaneously in combination with one

Learning the Basics

Using the keyboard

of the specially marked keys allows you to emulate a full-size

keyboard.

Your computer’s keyboard has only one Enter and one Ctrl key.

Most of the time, this does not matter. However, some

programs assign separate functions to the right and left Ctrl

and Alt keys, or to the regular and numeric pad Enter keys on

the full-sized keyboard. Using the Fn key you can simulate

these separate keys, as follows:

❖Press Fn and Ctrl simultaneously to simulate the Ctrl key on

the right side of the enhanced keyboard.

❖Press Fn and Enter simultaneously to simulate the Enter key

on the numeric pad of the enhanced keyboard.

Ctrl, Fn, and Alt keys

Sample Ctrl, Fn, and Alt keys

The Ctrl, Fn, and Alt keys do different things depending on the

program you are using. For more information, see your

program documentation.

Function keys

The function keys (not to be confused with the Fn key) are the

12 keys at the top of the keyboard.

Sample function keys

F1 through F12 are called function keys because they execute

programmed functions when pressed. Used in combination

with the Fn key, function keys marked with icons execute

specific functions on the computer. For example, Fn+F9 turns

off the TouchPad. For more information, see “Fn-esse®” on

page 149, or “Hot Keys” on page 199.

AltCtrl Fn

Learning the Basics

Using the keyboard

Windows® special keys

Sample Windows special keys

Your computer’s keyboard has two keys that have special

functions in Windows:

❖Start key—Opens the Start menu

❖Application key—Has the same function as the

secondary mouse (or AccuPoint II) button

Overlay keys

The keys with gray numbers and symbols on the front of

them form the numeric and cursor overlay. This overlay lets

you enter numeric data or control the cursor as you would

using the 10-key keypad on a desktop computer’s keyboard.

Sample numeric and cursor control overlay

Application key

Start key

Learning the Basics

Using the keyboard

Using the overlay to type numeric data

The keys with the numbers on their right front are the

numeric overlay keys.

To turn the numeric overlay on, press Fn and F11

simultaneously. The numeric mode light on the keyboard

indicator panel glows when the numeric overlay is on.

You can still use the overlay keys to type alphabetic

characters while the numeric overlay is on. To do so:

❖For lowercase letters, hold down Fn while you type the

letters.

❖For uppercase letters, hold down both Fn and Shift while

you type the letters.

Using the overlay for cursor control

To turn the cursor control overlay on, press Fn and F10

simultaneously. The cursor control mode light on the

keyboard indicator panel glows when the cursor control

overlay is on.

To type alphabetic characters while the overlay is on:

❖For lowercase letters, hold down Fn while you type the

letters.

❖For uppercase letters, hold down both Fn and Shift while

you type the letters.

❖To use the numeric keypad overlay when the cursor

control overlay is on, hold down Shift while you use the

numeric overlay keys. To return to the cursor control

overlay, release Shift.

To turn off the cursor control overlay, hold down the Fn key

and press F10 again. The cursor control mode light on the

keyboard indicator panel goes out.

Learning the Basics

Starting a program

The easiest way to start a program is to double-click the name

of the file that contains the information you want to work on.

To find the file, use My Computer or Windows Explorer.

If you prefer to open the program first, you have four options.

You can:

❖Double-click the icon for the program on your desktop

❖Use the Start menu

❖Use Windows Explorer or My Computer to locate the

program file

❖Use the Run dialog box

The next three sections explain how to start a program from

the Start menu, Explorer and the Run dialog box.

Starting a program from the Start menu

When you install a program, the operating system usually

puts an icon in the All Programs menu. To start a program

that has an icon in the All Programs menu, follow these steps,

which use the Windows WordPad program as an example:

1Click Start, then point to All Programs.

The Windows XP operating system displays the All Programs

menu, which lists programs and program groups. If your

program is listed, go to step 3, otherwise, continue with step 2.

2Point to the program group, in this example, Accessories.

The Accessories menu is displayed.

3Click the program, in this example, WordPad.

WordPad opens.

To close the program, click the Close button in the

upper-right corner of the program’s window.

Learning the Basics

Starting a program

Starting a program from Windows® Explorer

If a program is not listed in the Programs menu, you can start

it from Windows Explorer. Windows Explorer gives you a

view of your computer’s contents as a hierarchy or “tree.”

You can easily see the content of each drive and folder on

your computer. To use this method, you should know the file

name and location of the program’s executable file (this file

ends with .exe).

This example opens WordPad using its file name,

wordpad.exe.

1Click Start, then point to All Programs.

2Click Accessories.

3Click Windows Explorer.

4Click My Computer, to expand it.

5In the left part of the window, under the C: icon, double-

click the folder containing the program, in this case

Program Files.

Windows Explorer shows the contents of the Program Files

folder on the right side of the window. The left side of the

window shows all the folders contained within the Program

Files folder.

6In the left part of the window, click Windows NT.

7Click Accessories.

Windows Explorer shows the contents of the Accessories

folder on the right side of the window.

8In the right part of the window, double-click WordPad.

WordPad opens.

To close the program, click the Close button in the

upper-right corner of the program’s window.

Learning the Basics

Starting a program

Starting a program from the Run dialog box

This example uses the Run command to start WordPad:

1Click Start, then click Run.

The Run dialog box appears.

Sample Run dialog box

2In the Run dialog box:

❖If you know the program’s location, type the command

line. For a program in the Windows folder, type just the

program name. Otherwise, type the full file path. For

example, to access WordPad, type:

c:\Program Files\WindowsNT\Accessories\Wordpad, then click

OK.

❖If you do not know the location, click Browse....

In the Browse dialog box, enter the file name (for

example, wordpad.exe) and select the drive to search.

When the operating system has found the file, click

Open.

HINT: To run the same program again, click the arrow to the

right of the text box and select the command line from the

drop-down list.

Learning the Basics

Saving your work

Before you turn off the computer, save your work on the hard

disk drive or a diskette.

Always save your data even when you are using the Stand by. If

your battery fully discharges, your information will be lost.

Your computer can be configured to warn you when the battery

is running low, see “Setting battery alarms” on page 116.

Many programs offer a feature that saves documents at

regular intervals. Check your program’s documentation to see

if it has an automatic save feature.

Saving files

1On the File menu of your Windows program, click Save.

If you are working with a document that already has a file

name, this is all you need to do. If you created a new

document, your program displays a Save As dialog box.

Use this dialog box to specify where to store the document

and to give it a file name.

Sample Save As dialog box

Learning the Basics

Saving your work

2Choose the drive and folder where you want your file to

be stored.

3Type a file name, then click Save.

HINT: To make another copy of the file you are currently

working with, choose Save As from the File menu and give the

new file a different name.

The Windows XP operating system supports file names of up

to 255 characters; the names can include spaces. Some

applications still require MS-DOS® file names.

File names

If you plan to share your files with a computer using a pre-

Windows®95 version of the Windows operating system, the

file name must be no more than eight characters long.

Typically the file name also has an extension, consisting of a

period and up to three additional characters.

You may use all the letters and numbers on the keyboard plus

these characters: _ ^ $ ~ ! # % & { } ( ) @ and ‘. MS-DOS®

file names are not case-sensitive and must not contain spaces.

Using a file extension

Most programs assign an extension to the file name that

identifies the file as being created in the program with a

particular format. For example, Microsoft Word saves files

with a .doc extension. Any file name with an extension of

“.doc” is assumed to be a Microsoft Word file. Creating your

own extension is usually unwise, since the program is

unlikely to recognize a strange extension and may refuse to

handle your file correctly.

Learning the Basics

Printing your work

Verify that the Windows XP operating system is set up for

your printer as described in “Setting up your printer” on

page 65.

TECHNICAL NOTE: You only need to set up the printer the first

time you connect it. If you use more than one printer or are

changing printers, you will need to set up the operating system

to run with the additional printer(s).

To print a file:

1If your printer is not on, turn it on now.

2Open the File menu of your Windows program and click

Print.

The program displays a Print dialog box.

Sample Print dialog box

3Specify the print parameters. For example, the range of

pages and number of copies to print.

4Click Print.

Learning the Basics

Backing up your work

Backing up your files means copying individual files to

media, such as CDs, or copying entire sections of your hard

disk to another device, such as a tape drive.

For those systems with a writable CD-ROM drive or DVD-

ROM multi-function drive, you may back up file to a writable

disc as follows:

1To back up to a CD or other media, insert the media into

the appropriate drive.

2Click Start, then click My Computer.

3Click the drive that contains the file you want to copy.

4Double-click the folder that contains the file, then click

the file you want to copy.

HINT: You can use the Ctrl or Shift keys to select more than

one file.

5Click File, then click Send To and select the drive from

the list.

Complete information on the backup program is in the online

Help and your Windows documentation.

HINT: Backing up all the files on your hard disk takes a

considerable amount of time and many diskettes. You may

prefer to use a high-capacity backup system, such as an

external tape drive.

Learning the Basics

Using the DVD-ROM or multi-function drive

Restoring your work

To restore information from your backup media to your hard

disk, use the Restore page in the backup program. Look in the

online Help or your operating system documentation for

information on restoring files.

TECHNICAL NOTE: When restoring files, the backup program

prompts you if you try to overwrite a file that already exists on

the hard disk. Make sure the backup version is the one you

want before overwriting the existing file.

Using the DVD-ROM or multi-function drive

Optical storage has become the preferred medium for

software, music, and video. Digital versatile discs (DVDs)

provide a significant increase in data storage and support

features that are not available on any other video platform.

These features include wide-screen movies, multiple

language tracks, digital surround sound, multiple camera

angles, and interactive menus.

For these reasons, your computer may come with a DVD-

ROM drive or multi-function drive.

TECHNICAL NOTE: Your DVD-ROM or multi-function drive

set to play region 1 (North America) DVD-ROMs. If you play a

DVD disc from another region, the drive will automatically

change to play in the format of the other region. The drive will

allow you to change regions four times. On the fourth change,

the region will be “locked in.” That is, the drive will only play

DVDs from that last region. Note that changing from region 1

to region 2 and back to region 1 is counted as two changes.

Learning the Basics

Using the DVD-ROM or multi-function drive

For optimum CD and DVD performance, it is recommended

that you play CDs and DVDs while running the computer on

AC power.

You use CD-ROMs and DVD-ROMs to load and run

software, and to access reference material such as catalogs, as

well as listen to music. A special feature allows you to play

audio CDs and movie DVDs even when the computer is

turned off.

Drive components and control buttons

The DVD-ROM or multi-function drive resides on the right

side of the computer. The CD/DVD control buttons are

located at the top of the keyboard and can be accessed when

the display panel is open.

DVD-ROM or multi-function drive components

Your DVD-ROM or multi-function drive may look like this:

Sample DVD-ROM or multi-function drive

Drive in-use indicator light—Indicates when the drive is in

use.

Eject button—Press to release the disc tray.

NOTE

NOTENOTE

Drive in-use indicator light

Eject button

Manual eject hole

Learning the Basics

Using the DVD-ROM or multi-function drive

Do not press the eject button or turn off the computer while the

Drive in-use indicator light is glowing. Doing so could

damage the disc or the drive.

When the disc tray is open, be careful not to touch the lens or

the area around it. Doing so could cause the drive to

malfunction.

Manual eject hole—Use if you need to release the disc tray

when the power is off. Use a straightened paper clip or other

narrow object to press the manual eject button located inside

the hole.

Never use a pencil to press the eject button. Pencil lead can

break off inside the computer and damage it.

CD/DVD control buttons

The control buttons on the front edge of the computer let you

play audio CDs when the computer is on.

Sample CD/DVD control buttons above the computer

keyboard

The previous track button returns to the preceding track on

the disc.

The next track button skips to the following track on the

disc.

The play/pause button starts playing the disc or makes it

pause if currently playing.

Previous Next Play/Pause Stop/Eject

track track

Learning the Basics

Using the DVD-ROM or multi-function drive

The stop/eject button stops a disc that is currently playing.

You can eject a disc by pressing the stop/eject button twice.

Use this method to eject a disc when the computer is turned

off and the sound subsystem is turned on.

Inserting a compact disc

To insert a compact disc into the drive:

1Make sure the computer is turned on.

2Make sure the in-use indicator light is off.

To avoid damaging a disc or losing data, check that the disc

activity light is off before opening the disc tray.

3Press the drive’s eject button.

The disc tray slides partially out of the drive (about 1 inch).

Sample drive tray partially extended

HINT: The drive will not open if the computer’s power is off.

4Grasp the tray and pull it fully open.

Learning the Basics

Using the DVD-ROM or multi-function drive

5Hold the disc by its edges and check that it is clean and

free of dust.

Handle discs carefully. Avoid touching the surface of the disc.

Grasp it by its center hole and edge. If you handle the disc

incorrectly, you could lose data.

If the disc is dusty, clean it as described in “Caring for CD or

DVD Discs” on page 99.

6Carefully place the disc in the disc tray, label side up.

Sample positioning the disc in the drive

7Gently press the disc onto the center spindle until it clicks

into place.

Be careful not to touch the drive’s lens (located underneath the

drive’s spindle) or the area around it. Doing so could cause the

drive to malfunction.

Learning the Basics

Using the DVD-ROM or multi-function drive

8Make sure the disc is completely on the spindle and is

lying flat on the tray.

If you insert the disc incorrectly, it may jam the drive. If this

happens, contact Toshiba support for assistance.

9Push the disc tray in by pressing gently on the center of

the tray until it clicks into place.

You are ready to use the disc.

Playing an audio CD

Insert an audio CD and close the disc tray.

The computer automatically detects a disc in the drive and

opens the Audio CD window. To play an audio CD select the

Play Audio CD using Windows Media Player option and

click OK.

The Windows Media® Player opens and the CD begins to

play. You can use the Windows Media Player program to

control the CD.

To access the Windows Media Player, you can open it

through the Start menu or activate it from the taskbar.

When using Windows Media Player, your system may not be

able to activate Standby or Hibernation modes. To prevent this

from occurring, close Windows Media Player before you select

Standby or Hibernation mode.

NOTE

NOTENOTE

Learning the Basics

Using the DVD-ROM or multi-function drive

Sample Windows Media Player screen

The Windows Media Player control panel works much like an

ordinary compact disc player:

❖To play the CD or to pause, click the Play/pause button

on the CD Player control panel.

❖To stop the CD, click the Stop button.

Before using headphones to listen to an audio CD, turn the

volume dial down. Playing the CD with the volume set too

high could damage your ears.

Playing CDs using Auto-Run

If you insert a CD into the DVD-ROM/multi-function drive

and the Auto-Run feature does not automatically start your

disk, try launching the CD manually. To do this, follow these

steps:

1Open the Start menu and select My Computer.

Learning the Basics

Using the DVD-ROM or multi-function drive

2Click the DVD-ROM/multi-function drive icon.

The disk drive will run the CD.

If your disk does not run using this method, try using an

application that is associated with the media on the disk. For

example, if it is a music CD, open Windows

® Media Player

and point it to play the CD. For other types of media, use the

associated software to open the files on the disk.

Creating a CD

Your computer may come with a multi-function drive that

allows you to:

❖Play pre-recorded DVDs

❖Play pre-recorded CDs

❖Read and write data (depending on your system

configuration) and music files to CD-Recordable (CD-R)

and CD-Rewritable (CD-RW) discs; and read DVD-R/-

RW or DVD RAM discs.

Copy protection technology included in certain media may

prevent or limit recording or viewing of the media.

For details on how to use the software, please refer to the

respective Online Help menus.

Viewing the contents of a CD or DVD

CDs and DVDs contain files just like the hard disk. CDs are

often used to install software or store files that require lots of

space, such as photographs and large presentation files. You

can use Explorer or My Computer to view the contents of any

CD or DVD.

NOTE

NOTENOTE

Learning the Basics

Using the DVD-ROM or multi-function drive

Removing a disc with the computer on

To remove a compact disc (CD or DVD) with the computer

turned on:

Never press the eject button or turn off the computer while the

in-use indicator light is glowing. Doing so could damage the

disc or the drive.

1Press the eject button on the drive.

The disc tray partially opens.

If the disc is still spinning when you open the disc tray, wait for

it to stop before removing it.

2Pull the tray until it is fully open.

3Remove the disc and place it in its protective cover.

4Gently push the tray in to close it.

Removing a disc with the computer off

To remove a compact disc with the computer turned off:

1Insert a slender object, such as a straightened paper clip, into

the manual eject hole.

Never press the eject button or turn off the computer while the

drive-in-use light is glowing. Doing so could damage the disk

or the drive.

2Pull the tray out until it is fully open.

3Remove the disc and place it in its protective cover.

Learning the Basics

Powering down the computer

4Gently push the tray in to close it.

Caring for CD or DVD Discs

❖Store your discs in their original containers to protect

them from scratches and keep them clean.

❖Do not bend a disc or place heavy objects on top of it.

❖Do not apply a label to, or otherwise mar the surface of a

disc.

❖Hold a disc by its outside edge. Fingerprints on the

surface can prevent the DVD-ROM drive or multi-

function drive from reading the data properly.

❖Do not expose discs to direct sunlight or extreme heat or

cold.

❖To clean a disc that is dirty, wipe it with a clean, dry

cloth. The most efficient method to clean it is to start

from the center of the disc and wipe toward the outward

edge (not in a circle). If necessary, moisten the cloth with

water or a neutral cleaner (not benzine or rubbing

alcohol). Let the disc dry completely before inserting it in

the drive.

Powering down the computer

Pushing the power button before shutting down the Windows

operating system could cause you to lose your work. Make

sure the system indicator panel’s disk light and the drive-in

use light are off. If you turn off the power while a disk is being

accessed, you may lose data or damage the disk and/or drive.

When you power down the computer, you have three options

to choose from: Turn Off Computer, Standby, and

Hibernation.

100

Learning the Basics

Powering down the computer

TECHNICAL NOTE: Before using any of these options to power

down your computer, save your files and make sure the disk

activity lights are off.

If you change your mind and decide to continue working after

all, wait a few seconds before turning the computer on again.

Using Turn Off or Shut Down

The Turn Off or Shut down commands power off the

computer. The Windows® XP Home operating system uses

the Turn Off command. The Windows® XP Professional

operating system uses the Turn Off command if you are not

connected to a Windows® domain server. The Windows® XP

Professional operating system uses the Shut down command

if you are a member of a domain.

Factors to consider when choosing Turn Off or Shut down:

❖No power is used while the computer is turned off. This

is the most efficient mode if you will be away from your

computer for an extended time.

❖Restarting from Turn Off or Shut down uses the most

time and battery power.

When starting up again, the system does not automatically

open the programs and files you were previously using.

For the Windows XP Home operating system or for the

Window XP Professional operating system when not

connected to a domain server:

1Click Start, select Turn off computer.

The Turn off computer dialog box appears.

101

Learning the Basics

Powering down the computer

Sample Turn off computer Windows dialog box

2Click Turn Off.

The computer shuts down completely.

Holding the shift key while the Turn Off computer Windows

dialog box is open, changes the Stand By button to hibernate.

For more information about setting up hibernation, refer to

“Using Hibernation” on page 103.

For the Windows XP Professional operating system when

connected to a domain server, follow these steps to shut down

the computer:

1Click the Start button, then Shut down.

The Shut Down Windows dialog box appears.

2Select Shut down from the drop-down list.

3Click OK.

The computer shuts down completely.

Shutting down more quickly

In addition, you can shut down the computer by pressing the

power button.

To use either of these methods, you first need to turn it on in

Toshiba’s Power Saver utility.

NOTE

NOTENOTE

102

Learning the Basics

Powering down the computer

1Open the Start menu, click Control Panel, then

Performance and Maintenance.

2Click the Toshiba Power Saver icon.

3Click on the Setup Action tab.

4Select the options you want from the drop-down lists.

❖When I press the power button

Set this option to Shutdown to have the computer shut

down when you press the power button.

5Click Apply.

6Click OK.

Sample system power mode settings

For more information about the Power Saver utility, see

“TOSHIBA Power Saver” on page 154.

NOTE

NOTENOTE

103

Learning the Basics

Using Hibernation

Starting again after Shut down

To start the computer up again, press the power button until

the on/off light changes to green.

If you shut down the computer by closing the display panel,

you can start it again by opening the display panel.

Using Hibernation

Hibernation mode shuts the computer down completely, but it

first saves the current mode of the computer to the hard disk.

Since Hibernation mode does not require power to maintain

the saved information, the system settings are retained

indefinitely. Restoring information from the hard disk takes

longer than restoring it from memory. When you start up

again, the computer runs a self-test, loads the operating

system, and then returns to the mode in which you left it.

Factors to consider when choosing Hibernation:

❖While in Hibernation mode, the computer uses no battery

power

❖Because the mode of the system is held on the hard disk,

no data is lost if the main battery discharges

❖When starting up again, Hibernation uses less time and

battery power than does Turn off computer

❖Restarting from Hibernation uses a little more time and

battery power to start up than restarting from Standby,

because information is being retrieved from the hard disk

rather than from memory

❖When starting up again, the computer returns to the mode

in which you left it, including all open programs and files

you were previously using

Configuring your computer for Hibernation

1Open the Start menu, click Control Panel then

Performance and Maintenance.

104

Learning the Basics

Using Hibernation

2Click the Toshiba Power Saver icon.

3Click the Setup Action tab.

4Select Hibernation for the options you want.

❖When I press the power button

Set this option to Hibernate so that the computer will go

into Hibernation mode when you press the power button.

❖When I close the lid

Set this option to Hibernate so that the computer will go

into Hibernation mode when you close the display panel.

5Click Apply.

6Click OK.

The computer is now set to automatically go into Hibernation

when your option settings occur.

For more information about the Power Saver utility, see

“TOSHIBA Power Saver” on page 154.

Once the computer is configured, place the computer into

Hibernation mode by either pressing the power button or

closing the display panel, depending on the hibernation

options selected.

Starting again from Hibernation mode

To restart the computer from Hibernation mode, press the

power button until the on/off light turns green. The computer

returns to the screen you were using.

If you place the computer in Hibernation mode by closing the

display panel, you can start it again by opening the display

panel.

NOTE

NOTENOTE

105

Learning the Basics

Using Standby Mode

Standby mode places the computer into a power-saving state.

Standby holds the current mode of the computer in memory

so that, when you restart the computer, you can continue

working from where you left off.

Factors to consider when choosing Standby:

❖While in Standby mode, the computer uses some battery

power. The battery will eventually discharge in Stand by

mode. If the battery discharges, your data will be lost if

you do not save your work before entering Standby

mode.

❖Restarting from Standby mode uses less time and battery

power than restarting from Turn off or Hibernation mode.

❖When starting up again, the computer returns to the mode

in which you left it, including all open programs and files

you were previously using.

If you power down using Standby and the main battery

discharges fully, your information will be lost. Be sure to save

your work first.

To power down the computer using Standby, click Start,

Turn off computer, and select Stand By.

NOTE

NOTENOTE

106

Learning the Basics

Using Standby Mode

Sample Turn off computer Windows dialog box

If you hold down the Shift key, Stand By becomes Hibernate in

the Turn off computer dialog box. To enter hibernation mode,

you must hold down the Shift key while you select Hibernate.

The computer saves the status of all open programs and files,

turns off the display, and goes into a low-power mode. The

on/off light blinks amber indicating the machine is in Standby

mode.

Going into Standby mode more quickly

You can configure the computer to enter Standby mode by

either pressing the power button or closing the display panel.

You can also specify an amount of time after which the

computer automatically enters into Standby mode.

To use either of these methods, you first need to configure

them in Toshiba’s Power Saver utility.

1Open the Start menu, click Control Panel then

Performance and Maintenance.

2Click the Toshiba Power Saver icon.

3Click the Setup Action tab.

4Select Standby for the options you want.

NOTE

NOTENOTE

107

Learning the Basics

Toshiba’s online resources

❖When I press the power button

Set this option to Standby to put the computer into

Standby mode when you press the power button.

❖When I close the lid

Set this option to Standby to put the computer into

Standby mode when you close the display panel.

5Click Apply.

6Click OK.

For more information about the Power Saver utility, see

“TOSHIBA Power Saver” on page 154.

Starting again from Standby mode

To restart the computer from Standby mode, press the power

button until the on/off light changes to green. The computer

returns to the screen you were previously using.

If you place the computer in Standby mode by closing the

display panel, you can start it again by opening the display

panel.

Toshiba’s online resources

Toshiba maintains a number of online sites to which you can

connect. These sites provide information about Toshiba

products, give help with technical questions and keep you up

to date with future upgrades. For more information, see

“Contacting Toshiba” on page 196.

NOTE

NOTENOTE

108

Chapter 3

Mobile Computing

This chapter covers many of the aspects of using your

computer on battery power.

Toshiba’s energy-saver design

Your computer enters a low-power, standby mode when it is

not being used, thereby conserving energy and saving money

in the process. It has a number of other features that enhance

its energy efficiency.

Many of these energy-saving features have been set by

Toshiba. We recommend you leave these features active,

allowing your computer to operate at its maximum energy

efficiency, so that you can use it for longer periods of time

while traveling.

Running the computer on battery power

The computer contains a removable Lithium-Ion (Li-Ion)

high-capacity battery that provides power when you are away

from an AC outlet. You can recharge it many times.

109

Mobile Computing

Running the computer on battery power

Battery Notice

Battery life may vary, depending on applications, power

management settings, and features utilized. Recharge time varies

depending on usage. The battery may not charge while the

computer is consuming full power.

After a period of time, the battery will lose its ability to

perform at maximum capacity and will need to be replaced.

This is normal for all batteries. To purchase a new battery

pack, see your accessories information that shipped with your

computer, or to stay current on the most recent software and

hardware options for your computer, and for other product

information, regularly check the Toshiba Web site at

accessories.toshiba.com.

To ensure that the battery maintains its maximum capacity,

operate the computer on battery power at least once a month

until the battery is fully discharged. Please see “Maximizing

battery life” on page 122 for procedures. If the computer is

continuously operated on AC power, either through an AC

adapter or a docking station (if applicable to your system), for

an extended period (more than a month), the battery may fail

to retain a charge. This may shorten the life of the battery, and

the battery light may not indicate a low-battery condition.

For optimum DVD performance, Toshiba recommends that you

play DVDs while running on AC power rather than on battery

power.

Battery life is less than when using similar applications in the

Windows operating system.

NOTE

NOTENOTE

110

Mobile Computing

Running the computer on battery power

Over a period of time, and depending on the usage of the

computer, the brightness of the LCD Screen will deteriorate.

This is an intrinsic characteristic of LCD technology.

Screen will dim when the computer is operated on battery

power and you may not be able to increase the brightness of

the screen.

Power management

Your computer ships with the power management options

preset to a configuration that will provide the most stable

operating environment and optimum system performance for

both AC power and battery modes.

Changes to these settings may result in system performance

or stability issues. users who are not completely familiar with

the power management component of the system should use

the preset configuration. For assistance with setup changes,

contact Toshiba’s Global Support Centre.

Using additional batteries

If you spend a lot of time traveling and need to work for

many hours without an AC power source, you may want to

carry additional charged batteries with you. You can then

replace a discharged battery and continue working.

NOTE

NOTENOTE

111

Mobile Computing

Charging the batteries

Battery charge time may vary depending on the applications,

power management settings, and features used.

The battery needs to be charged before you can use it to

power the computer.

Never leave batteries in the battery charger for more than a

week at a time. Doing so may reduce the potential charge of

the battery.

Use only battery chargers designed to work with your

notebook computer. You can order a Toshiba battery charger

from Toshiba’s Web site at accessories.toshiba.com.

Charging the main battery

To charge the main battery while it is in your computer, plug

the computer into a live electrical outlet. The battery charges

whether the computer is on or off.

TECHNICAL NOTE: When your computer is using all of the

power provided by the AC Adaptor to run applications,

features, and devices, the recharging of the battery can not

occur. Your computer's Power Saver utility can be used to

select a power level setting that reduces the power required for

system operation and will allow the battery to recharge.

The main battery light ( ) glows amber while the battery is

being charged, and glows green when it is fully charged.

NOTE

NOTENOTE

112

Mobile Computing

Charging the batteries

The battery may not start charging immediately under the

following conditions:

❖The battery is extremely hot or cold.

To ensure that the battery charges to its full capacity, wait until

it reaches room temperature.

❖The battery is almost completely discharged.

Leave the power connected and the battery should begin

charging after a few minutes.

Charging the RTC battery

Your computer has an internal real-time clock (RTC) battery.

The RTC battery powers the System Time Clock and BIOS

memory used to store your computer’s configuration settings.

When fully charged, it maintains this information for up to a

month when the computer is powered off.

The RTC battery may have become completely discharged

while your computer was shipped, resulting in the following

error message during startup:

BAD RTC BATTERY

BAD CHECKSUM (CMOS)

CHECK SYSTEM

The above error message may vary by computer model.

The RTC battery does not charge while the computer is turned

off even when the AC adapter is charging the computer.

If the RTC battery is low, the real-time clock and calendar

may display the incorrect time and date, or stop working.

To recharge the RTC battery, connect the computer and leave

it powered on for 24 hours.

NOTE

NOTENOTE

113

Mobile Computing

Monitoring battery power

It is seldom necessary to charge the RTC battery because it

charges while the computer is on. If the RTC battery is low, the

real-time clock and calendar may display the incorrect time

and date or stop working.

When Hibernation mode is enabled and the RTC battery is

completely discharged, a warning prompts you to reset the

real-time clock.

The computer can be used while the RTC battery is being

charged, although the charging status of the RTC battery

cannot be monitored.

Monitoring battery power

The computer’s main battery light gives you an indication of

the main battery’s current charge:

❖Green indicates the AC adapter has fully charged the

battery.

❖Amber indicates the AC adapter is charging the battery.

❖Off indicates that the battery is not being charged.

❖Flashing amber indicates that the computer is using

battery power, and the battery’s charge is running low.

HINT: Be careful not to confuse the battery light ( ) with the

on/off light ( ). When the on/off light flashes amber, it

indicates that the system is suspended (using Windows XP

Standby command).

NOTE

NOTENOTE

114

Mobile Computing

Monitoring battery power

Determining remaining battery power

Wait at least 16 seconds after turning on the computer before

trying to monitor the remaining battery power. The computer

needs this time to check the battery’s remaining capacity and

perform its calculations.

1Open the Start menu, click Control Panel, then

Performance and Maintenance.

2Click the Toshiba Power Saver icon.

The current power source and battery power remaining

section displays the current charge state of the battery. The

value displays as a percentage of remaining battery charge.

Sample Toshiba Power Saver Properties Dialog Box

NOTE

NOTENOTE

115

Mobile Computing

Monitoring battery power

The remaining battery charge is indicated on the top-left side

of the dialog box.

With repeated discharges and recharges, the battery’s

capacity gradually decreases. A frequently used older battery

does not power the computer for as long as a new battery,

even when both are fully charged.

TECHNICAL NOTE: The computer drains the battery faster at

low temperatures. Check your remaining charge frequently if

you are working in temperatures below 50 degrees Fahrenheit.

The computer calculates the remaining battery charge based

on your current rate of power use and other factors such as the

age of the battery.

What to do when the battery runs low

When the battery runs low you can:

❖Plug the computer into an external power source and

recharge the battery.

❖Put the computer in Hibernate mode and replace the

battery with a charged spare.

❖Save your work and turn off the computer.

If you do not set any of these options before the battery

completely runs out of power, the computer automatically

enters Hibernation mode and turns itself off. Hibernation

mode keeps track of where you were so, when you turn on the

power again, you can continue where you left off.

The computer stores the information on what you were doing

until the battery runs out of power. If you have Hibernation

mode enabled (the default), the computer copies the details of

your open programs and files to the hard disk before shutting

down.

116

Mobile Computing

Monitoring battery power

Setting battery alarms

Your computer can be configured to warn you of a low

battery charge condition, so you can take the necessary steps

to save your work.

Your Windows operating system offers two alarms before

your system shuts down.

To change the default alarm settings:

1Open the Start menu, click Control Panel, then

Performance and Maintenance.

2Click the Toshiba Power Saver icon.

3Click the Setup Action tab.

4Select the Alarm settings in the Setup Alarm section.

Before your computer runs out of battery power, save your

data and take one of the following actions:

❖Suspend or shut down your computer.

❖Shut down your computer and replace the main battery

with a charged one.

❖Connect your computer to an AC power source.

Conserving battery power

How long a fully charged battery lasts when you are using the

computer depends on a number of factors, such as:

❖How the computer is configured

❖How much you use the display panel instead of an

external monitor

❖How much you use the hard disk and other drives

❖Whether you use any optional devices to which the

battery supplies power, such as a PC Card

❖Where you are working—since operating time decreases

at low temperatures

117

Mobile Computing

Monitoring battery power

There are various ways in which you can conserve power and

extend the operating time of your battery:

❖Enable Standby or Hibernation, which saves power when

you turn off the computer and turn it back on again.

❖Use Toshiba’s power-saving options.

These power-saving options control the way in which the

computer is configured. By using them, you can greatly

increase the length of time you can use the computer before

you need to recharge the battery.

Toshiba has combined these options into preset power usage

modes or profiles.

Power profiles in Windows® XP

In Windows XP, you can choose from predefined power

profile or select your own combination of power management

options. The following steps describe this procedure.

If you try to use the power management feature in Windows, a

message tells you to close the Microsoft power options and

use the Toshiba Power Saver instead.

1Open the Start menu, click Control Panel, then

Performance and Maintenance.

2Click on the Toshiba Power Saver icon.

3Select an appropriate profile for your work environment,

or create your own custom profile.

4For more information, see “TOSHIBA Power Saver” on

page 154.

NOTE

NOTENOTE

118

Mobile Computing

Monitoring battery power

Using a hot key to set the power profile

You may use a hot key to set the power profile.

To set the power profile:

1Press Fn F2 and simultaneously to display the power profile

pop-up window.

Sample Power Profile mode pop-up window

2While continuing to press Fn, press F2 until you select the

desired power profile.

The power profile options are: Full Power, High Power,

Normal, DVD Playback, Presentation, and Long Life.

3Release the Fn key.

The pop-up window disappears. You are now in the selected

mode.

For more information on setting the battery power profile, see

“TOSHIBA Power Saver” on page 154.

119

Mobile Computing

Changing the main battery

When your battery power is running low, you have two

options—connect the computer to an AC power source or

install a charged battery.

When handling a battery, be careful not to drop it or short-

circuit its terminals. Also, do not drop, hit, or otherwise impact

the battery. Do not scratch or break the casing and do not twist

or bend the battery pack.

Do not remove the battery pack while the computer is in

Standby mode. Data in memory will be lost.

If your battery discharges fully, your information will be lost.

Be sure to save your work often.

Removing the battery from the computer

1Save your work.

2Shut down and turn off the computer.

3Remove all cables connected to the computer.

4Turn the computer over.

120

Mobile Computing

Changing the main battery

5If the battery lock is in the locked position, slide it toward

the unlocked position.

Sample sliding the battery lock to the unlocked position

6Slide and hold down the battery release latch.

7While holding the battery release latch, pull the

discharged battery out from the back of the computer.

Sample removing the discharged battery pack

If the battery is leaking or its case is cracked, put on protective

gloves to handle it, and discard it immediately following the

advice in “Disposing of used batteries” on page 123.

121

Mobile Computing

Taking care of your battery

Inserting the battery into the computer

Assuming you just removed the battery pack (see “Removing

the battery from the computer” on page 119):

1Place the battery pack in the battery compartment.

If the battery does not slide into the slot easily, move the

battery release lock to the unlocked position and try again. Do

not force the battery into position.

2Ensure the battery release latch clicks into place.

3Slide the battery release lock to the locked position.

4Turn the computer right side up.

5Reconnect the cables and turn on the computer.

The battery pack has been designed so that you cannot install

it with reverse polarity.

Taking care of your battery

The following sections offer tips on how to take care of your

battery and prolong its life.

Safety precautions

❖If the battery pack produces an odor, overheats or

changes color or shape while it is being used or charged,

turn off the computer’s power immediately and

disconnect the power cord from the power socket.

Carefully remove the battery pack from the computer.

❖Do not try to disassemble a battery pack.

❖Do not overcharge or reverse charge a battery.

Overcharging will shorten its life, and reverse charging

could damage it.

122

Mobile Computing

Taking care of your battery

❖Avoid touching the metal terminals of the battery with

another metal object. Short-circuiting the battery can

cause it to overheat and may cause damage to the battery

or the computer.

❖Do not incinerate a spent battery, as this could cause it to

explode and release toxic materials.

❖If a battery is leaking or damaged, replace it immediately.

Use protective gloves when handling a damaged battery.

❖To replace the main battery, use an identical battery that

you can purchase through to Toshiba Web site at

accessories.toshiba.com.

❖A reverse polarity condition should be avoided with all

batteries. The main battery is designed so that it cannot

be installed in reverse polarity.

❖Charge the battery only in the computer or in a battery

charger designated as an approved option.

❖When you install the battery pack, you should hear a

click when it is seated properly.

❖Do not expose the battery pack to fire. The battery pack

could explode.

Maximizing battery life

To maximize the life of your battery pack:

❖At least once a month, disconnect the computer from a

power source and operate it on battery power until the

battery pack fully discharges. Before doing so, follow the

steps below:

1Turn off the computer’s power.

2Disconnect the AC adapter and turn on the

computer’s power. If it does not turn on, go to step 4.

3Operate the computer on battery power for five

minutes. If the battery pack has at least five minutes

of operating time, continue operating until the battery

123

Mobile Computing

Disposing of used batteries

pack is fully discharged. If the battery light LED

flashes or there is some other warning to indicate a

low battery, go to step 4.

4Connect the AC adapter to the computer and the

power cord to a power outlet. The DC-IN or AC

power-light LED should glow green, and the Battery

LED should glow amber to indicate that the battery

pack is being charged. If the DC-IN or AC power-

light indicator does not glow, power is not being

supplied. Check the connections for the AC adapter

and power cord.

5Charge the battery pack until the Battery LED glows

green.

❖If you have extra battery packs, rotate their use.

❖If you will not be using the system for an extended

period, more than one month, remove the battery pack.

❖Disconnect the AC adapter when the battery is fully

charged. Overcharging makes the battery hot and

shortens life.

❖If you are not going to use the computer for more than

eight hours, disconnect the AC adapter.

❖Store spare battery packs in a cool dry place out of direct

sunlight.

Disposing of used batteries

The life of a battery pack should last for years. When the

battery pack needs replacing, the main battery light flashes

amber shortly after you have fully recharged the battery.

You must discard a battery if it becomes damaged.

124

Mobile Computing

Traveling tips

The computer’s main battery is a Lithium-Ion (Li-Ion) battery,

which can explode if not properly replaced, used, handled, or

disposed of. Putting spent batteries in the trash is not only

irresponsible, it may be illegal. Dispose of the battery as

required by local ordinances or regulations.

Use only batteries recommended by Toshiba.

After repeated use, the batteries will finally lose their ability

to hold a charge and you will need to replace them. Under

federal, state, and local laws, it may be illegal to dispose of

old batteries by placing them in the trash.

Please be kind to our shared environment. Check with your

local government authority for details regarding where to

recycle old batteries or how to dispose of them properly. If

you cannot find the information you need elsewhere, call

Toshiba at: (800) 457-7777.

Traveling tips

The environmental precautions listed in “Selecting a place to

work” on page 39, also apply while traveling.

❖Never leave your computer on a sunny ledge or in a place

where it could get wet or covered in dust.

❖Always travel with the computer in a carrying case.

Toshiba offers a choice of carrying cases for the

computer. They all provide plenty of extra space for

manuals, power cables, and compact discs. Contact your

authorized Toshiba representative for more information.

TECHNICAL NOTE: When traveling by air, you may be required

to pass your notebook through airport security equipment. The

X-ray equipment will not harm your computer.

125

Chapter 4

Exploring Your Options

In this chapter, you will explore some of the special features

of your Satellite® Series notebook computer.

Exploring the desktop

The desktop is the launching pad for everything you can do in

the Windows XP Home or XP Professional operating system.

You use its features to start programs, find documents, set up

system components, and perform most other computing

tasks.

HINT: The illustrated examples in this guide may appear

slightly different from the screens displayed by your system.

The differences are not significant and do not indicate any

change in the functionality of your system.

126

Exploring Your Options

Exploring the desktop

Finding your way around the desktop

Your computer’s desktop includes several standard features:

icons, Start button, taskbar, system tray, and background

pattern.

Sample Windows XP operating system desktop

Icons

An icon represents a folder, file, or program that can be

quickly activated by double-clicking the icon.

You can create a new desktop icon for any folder, file, or

program by dragging the element’s icon from its location in a

window to the desktop area.

The icons initially displayed on your system desktop include:

Start button Taskbar

Icons

System tray

127

Exploring Your Options

Exploring the desktop

Recycle Bin — Holds files you have deleted. You may be

able to retrieve these files until you empty the Recycle Bin.

TECHNICAL NOTE: If you delete a file from a diskette, it do

not go into the Recycle Bin. For more information on the

Recycle Bin, see Windows online Help.

Internet Explorer — The Microsoft® browser that provides

access to the Internet.

If you place the cursor over an icon, a popup description of the

file contents appears.

Your desktop may contain other icons depending on your

configuration. See Windows XP online help for more specific

information on each icon and how to use it.

Start button

You use the Start button to:

❖Start programs

❖Access Microsoft Windows XP operating system update

information

❖Open documents

❖Adjust system settings

❖Find files

❖Access Windows Help

❖Run programs

❖Suspend system activity and shut down the computer

NOTE

NOTENOTE

128

Exploring Your Options

Exploring the desktop

Taskbar

Each time you open a program, a button associated with that

program appears on the taskbar. With some programs, a

button appears on the taskbar for each document or window

you open. You can use these buttons to quickly switch

between the programs or windows.

To make a program or window the currently active one, click

the associated taskbar button.

You can personalize the taskbar to include not only shortcut

icons but also your favorite Internet URL addresses.

DEFINITION: URL stands for Uniform Resource Locator, which

is the address that defines the route to a file on the Web or any

other Internet facility. Generically, it is known as the Web site

address.

System tray

The System tray displays icons of tasks or programs that run

continuously in the background. To learn more about each

task, position the cursor over the icon for a few moments and

a short description of the task appears.

Typical tasks in the System tray are Current time, Power

usage mode, Mouse properties, and speaker volume.

To activate a specific task, double-click the appropriate

System tray icon.

129

Exploring Your Options

Setting up for communications

Your computer comes with a built-in modem that can be

connected to a standard voice-grade telephone line.

The modem allows you to:

❖Access the Internet.

❖Communicate with your office’s local area network

(LAN), or a larger corporate wide area network (WAN).

For specific information about connecting to a LAN or WAN,

consult your network administrator.

❖Send a fax directly from your computer.

To connect to the Internet, use an online service, or

communicate across telephone lines with another computer,

you need:

❖A modem (one comes with your computer)

❖A telephone line

❖A browser or communications program

❖An Internet Service Provider (ISP) or online service if

you plan to use the Internet

To stay current on the most recent software and hardware

options for your computer, and for other product information,

be sure to regularly check the Toshiba Web site at

accessories.toshiba.com.

NOTE

NOTENOTE

130

Exploring Your Options

Setting up for communications

Determining the COM port

Your modem is connected to one of the computer’s COM

(communications) ports. The default setting for the modem is

COM3.

The following procedure is intended to support you if you

need to either upgrade your modem or reset the port to the

default settings.

If you are having trouble connecting through the modem, you

may need to determine the current COM port name and

possibly change it.

To find out which port your modem is connected to:

1Open the Start menu, click Control Panel.

2Click Printers and Other Hardware.

3Click Phone and Modem Options.

The Phone and Modem Options Properties dialog box

displays.

4Click the Modems tab.

Your modem should be listed next to one of the computer’s

COM ports.

5Make a note of the COM port number.

6To verify that the modem is set up properly, select the

modem you wish to check, and then click Properties to

bring up the dialog box with information specific to that

modem.

7Click the Diagnostics tab, and then click Query Modem.

Windows XP communicates with the modem and displays

identifying information reported by the modem. If Windows

XP cannot communicate with the modem, it displays an error

message. Consult the troubleshooting sections of your

modem and Windows XP documentation.

131

Exploring Your Options

Setting up for communications

8Click OK to close the properties dialog box for that

specific modem.

9Click OK to close the Modem Properties dialog box.

10 Close the Control Panel.

Connecting your modem to a telephone line

Before you can communicate using the modem, you need to

connect it to a telephone line. Your computer’s built-in

modem port provides an RJ-11 jack, allowing you to connect

the modem to a standard voice-grade telephone line.

❖Plug one end of a telephone cable (purchased separately) into

the modem port on the back of the computer. Send a fax

directly from your computer.

For more detailed information regarding your computer’s

modem, visit Toshiba’s Web site at accessories.toshiba.com.

1Plug one end of a telephone cable (purchased separately) into

the modem port on the back of the computer.

Sample connecting the telephone cable to the modem port

132

Exploring Your Options

Setting up for communications

2Connect the other end to the RJ-11 wall jack.

Sample connecting to a wall jack

The modem is designed for use with a standard analog

telephone line. Do not connect the modem to a digital

telephone line. A digital line will damage the modem.

Now you are ready to send a fax or use the modem to connect

to an online service or the Internet.

For more information on using a modem, see “Setting up for

communications” on page 129.

Connecting your computer to a network

You can connect your computer to a network to increase its

capabilities and functionality using one of its communication

ports.

Accessing a network

To access a network:

❖At the office, connect an Ethernet cable to the RJ45 jack

on your computer. For specific information about

connecting to the network, consult your network

administrator.

133

Exploring Your Options

Setting up for communications

❖While you are at home or traveling, you need a dial-up

connection. Ask your network administrator for the

telephone number of the network.

Setting up the connection

To set up an office connection, consult your network

administrator for network settings and additional

considerations.

To use a dial-up connection, have your network administrator

configure your computer for the network and supply you with

the telephone number for the dial-up connection. To set up

the network connection, use the Dial-Up Networking Wizard:

1Click Start and point to All Programs.

2Point to Accessories, then to Communications.

3Click New Connection Wizard.

4Enter the phone number of your network connection and

let the program dial the number.

The computer connects to the network.

Using the Ethernet LAN Port

When your computer starts, Windows attempts to contact a

Dynamic Host Configuration Protocol (DHCP) server. If the

computer is not connected to a network, it may pause a few

minutes as it waits for a reply. To avoid this delay, you can

reconfigure Windows to disable the LAN port.

TECHNICAL NOTE: You can also use ConfigFree to

reconfigure Windows to disable the LAN port. For procedures,

see “Using ConfigFree™ with your Toshiba Computer” on

page 206.

134

Exploring Your Options

Setting up for communications

To disable the LAN port:

1Click Start, click Control Panel then Performance and

Maintenance.

2Click the System icon, then click the Hardware tab, and

then click the Device Manager button.

3Select Intel ® Pro/100 VE Network Connection in

Network adapters.

4Click Actions.

5Select the Properties icon.

6Select the Do not use this device (disable) option from

the Device usage drop-down.

7Click OK.

Your LAN port is now disabled.

To enable the Ethernet LAN port, repeat steps one through

four. Select the Use this device (enable) check box, and click

OK.

Using Wireless LAN Connectivity

The transmission speed over the wireless LAN and the

distance over which wireless LAN can reach may vary

depending on surrounding electromagnetic environment,

obstacles, access point design and configuration, and client

design and software/hardware configurations.

Your system may come with an optional wireless LAN

module. This is a technology that expands wireless

communication beyond networking equipment, and can

connect many different kinds of electronic devices without

the need for cables.

NOTE

NOTENOTE

135

Exploring Your Options

An overview of using the Internet

For information on how to set up a wireless connection, refer

to your wireless networking device documentation or your

network administrator.

To use your wireless communication, flip the wireless

antenna on/off switch to the On position.

Using the Wi-Fi

® Wireless LAN Mini PCI module

Your computer may have an integrated Wi-Fi Wireless LAN

Mini PCI module. It is recommended that you do not remove

the module from your computer. For assistance, contact a

Toshiba Wireless Authorized Service Partner.

For systems equipped with Wi-Fi, flip the wireless on/off

switch to the On position.

An overview of using the Internet

The following sections give a quick introduction to the

Internet and some of its exciting features, under these

headings:

❖The Internet

❖The World Wide Web

❖Internet Service Providers

❖Connecting to the Internet

❖Surfing the Internet

❖Internet features

❖Uploading and downloading files from the Internet

The Internet

The Internet is an association of thousands of networks and

millions of computers around the world connected by

communications lines. They all work together to share

information.

136

Exploring Your Options

An overview of using the Internet

The World Wide Web

The World Wide Web (or “Web”) is a subset of the Internet

— a collection of interlinked documents (located on

computers connected to the Internet) that work together using

a specific Internet protocol called Hypertext Transfer

Protocol (HTTP).

The World Wide Web offers information as text, images,

audio, or video to be referenced from anywhere in the world.

Special programs called Web browsers are specifically

designed to work with HTTP. They make it easier to connect

to a particular network address and send and receive

information.

Internet Service Providers

To connect a computer directly to the Internet, many people

and businesses use an Internet Service Provider (ISP). An ISP

is a company that has the equipment and the

telecommunication lines necessary to maintain an Internet

connection.

You can connect to the Internet by using a telephone and

modem or through other higher-speed communication

methods such as Digital Subscriber Lines (DSL), cable, and

satellite links.

Connecting to the Internet

To connect to the Internet, you need:

❖A modem and telephone line, or a LAN connection

❖A Web browser

❖An Internet Service Provider (ISP) account

The Microsoft Web browser Internet Explorer is

automatically configured on your system so that when you

first start it, it guides you through signing up for a new ISP

account, or assists you in setting up your computer to work

with your existing ISP.

137

Exploring Your Options

An overview of using the Internet

Once you have established an ISP account, you can connect

to the Internet.

1Connect your computer’s modem to a telephone line.

For more information on connecting a modem, see

“Connecting your modem to a telephone line” on page 131.

2Start your Web browser. Have your modem dial the ISP’s

telephone number, and establish a connection with the

ISP’s computer.

If you are using your computer at the office, then you

probably connect to the Internet through your company’s

network. See your network administrator about connecting to

the Internet.

Surfing the Internet

Once connected to the Internet, the Web browser displays a

home page, for example, your ISP’s home page on the

Internet or your company’s Web site home page.

To visit a desired Web site, type in the Web address. The Web

address, or Uniform Resource Locator (URL), is a unique

identifier for that computer system linked to the Internet. Web

addresses can also appear within a Web page’s text, and are

known as links. Clicking a link automatically transfers your

Web browser to that site.

You can also use a Search Engine, a Web site specifically

designed to help you look for information.

Internet features

The Internet offers many types of communication tools to

help you perform many tasks.

❖Internet email

To send and receive email of your own, you need a mailbox

on the Web, or an email address.

138

Exploring Your Options

Exploring audio features

If you have an account with an ISP, you can probably set up

an email address at the same time you sign up for the service.

❖Internet chat rooms

A chat room is a Web site that offers a place where people

with similar interests and ideas communicate in real-time,

one-on-one or in groups, by typing messages which are

instantly viewed by others on their computer screens.

❖Internet news groups

A news group is similar to a chat room, but instead of using a

dedicated site to converse about a specialized subject with

others in real-time, it uses a Web site as a clearinghouse where

all the messages are placed, like a gigantic bulletin board.

❖Online shopping

Many Web sites offer products and services for sale.

Uploading and downloading files from the Internet

Transferring files from one computer to another is termed

uploading (transferring data from your computer to a site on

the Web), or downloading (transferring data from a site on the

Web to your computer).

There are several ways to upload or download data. It can be

as simple as attaching a file or document to an email, or you

can use the File Transfer Protocol (FTP) features of your Web

browser to transfer large amounts of data.

Exploring audio features

You can use your computer to record sounds using an

external microphone. You can play .wav sound files or audio

CDs using the built-in speakers, headphones or external

speakers.

139

Exploring Your Options

Exploring audio features

Recording sounds

You may record sounds as .wav files by connecting an

external microphone or other sound source to the microphone

jack.

DEFINITION: A .wav (pronounced “wave”) file is a Windows

format for storing sound.

TECHNICAL NOTE: If you record MP3 files, you will only be

able to play them on a device capable of playing MP3 files.

Using a microphone

1Connect an external microphone to the computer.

2Click Start, point to All Programs, Accessories,

Entertainment, then click Sound Recorder.

Sample Sound Recorder screen

3Click the Record button.

4Speak normally into the microphone.

5When you have finished recording, click the Stop button.

Record

Stop

Play

Skip forward

Skip backward

Positioning

bar

140

Exploring Your Options

Exploring audio features

The Sound Recorder window displays the new sound file as a

waveform.

You can only record 60 seconds at a time.

6To hear what you just recorded, click the Play button.

7To save the file, select Save from the File menu.

Adjusting recording quality

The better the quality of the recording, the more disk space

the sound file requires. Experiment to find a balance that fits

your needs.

1Open Sound Recorder, if necessary. (Click Start, point to All

Programs, Accessories, Entertainment, then click Sound

Recorder.)

2In the Sound Recorder window, click Edit, then click

Audio Properties.

3In the Audio Properties dialog box, adjust the Recording

Volume, Preferred device, and Preferred quality.

4Click OK.

Your new settings take effect the next time you record.

Using external speakers or headphones

Your computer is equipped with a full stereo sound system

with internal speakers. Instead of using the internal speakers,

you can connect headphones or a pair of external stereo

speakers.

NOTE

NOTENOTE

141

Exploring Your Options

Using the i.LINK® port

TECHNICAL NOTE: Use amplified speakers that require an

external power source. Other types of speakers will be

inadequate to produce sound from the computer.

To play back sound files through external speakers or

headphones:

1Locate the headphone jack on the computer.

2Using any necessary adapters, plug the cable from the

headphones or external speakers into the headphone jack.

The headphone jack requires a 16-ohm stereo mini-jack.

To adjust the volume:

❖For external speakers, use the volume controls on each

speaker.

❖For headphones, use the computer’s volume control dial.

Using the i.LINK® port

The i.LINK port on the left side of the computer provides an

extremely fast data transfer rate (up to 400 mega bits per

second [Mbps]). You can connect up to 63 external devices to

the i.LINK port.

In addition to high speed, the i.LINK port also supports

isochronous data — the delivery of data at a guaranteed rate.

This makes it ideal for devices that transfer high levels of data

in real-time, such as video devices.

As with USB ports, the i.LINK port supports both Plug-and-

Play (automatic configuration) and hot swapping (the ability

to connect and disconnect devices while the computer is on).

The main difference between i.LINK and USB technology is

that i.LINK supports faster data transfer rates.

142

Exploring Your Options

Inserting and removing hard drives

Your Satellite® A55 can use various hard drive capacities.

Depending upon the original hard drive installed in your

computer, you may wish to increase storage capacity by

changing the internal drive.

To change the internal hard drive:

1Shut down your computer completely using the Shut Down

command. See “Powering down the computer” on page 99.

2Unplug the computer.

3Close the display panel and remove any cables you may

have connected.

4Turn the computer upside down.

5Remove the screw on the hard drive cover.

Sample removing the hard drive cover screw

6Lift the edge of the hard drive cover and lift it up to

expose the hard drive.

143

Exploring Your Options

Inserting and removing hard drives

7Grasp the edge of the hard drive and pull it toward the

edge of the computer, then lift it straight up to remove it.

Sample removing the hard drive from the computer

8Install the new hard drive by setting it into the hard drive

slot and sliding back toward the center of the computer

until it locks. Do not force the drive into the computer.

Sample inserting the new hard disk drive

9Replace the hard drive cover and tighten the screw

removed as previously mentioned in step 5.

144

Exploring Your Options

Inserting and Removing PC Cards

PC Cards expand your computer’s capabilities and

usefulness. You can purchase additional PC Cards from your

dealer. Most PC Cards conform to the PCMCIA (Personal

Computer Memory Card International Association) standard.

Your Satellite® A55 Series computer comes with one PC

Card slot and supports two types of PC Cards:

Type I cards—You can install one of these cards.

Type II cards—You can install one of these cards.s

TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check

the package to make sure they conform to the PCMCIA 2.1

standard (or later). Other cards may work with your computer,

but are likely to be much more difficult to set up and use.

PC Card supporting software

PC Cards require Card and Socket Services software — a set

of programs that acts as a translator between the PC Card and

the computer, and that makes hot swapping (switching cards

while the computer is on) possible.

The operating system provides the Card and Socket Services

for your PC Card. Even if your PC Card comes with its own

version of Card and Socket Services, you should use the files

included in the operating system.

145

Exploring Your Options

Inserting and Removing PC Cards

Inserting a PC Card

Use caution when lifting or turning your computer. Failure to

do so may result in damage to components, such as cables,

attached to your computer, or to the computer itself.

Before you insert a PC Card, refer to the documentation that

comes with the card to see if you need to do anything before

you insert it.

To insert a PC Card:

1Turn off the computer.

You may also hot swap a PC Card. Stop the PC Card by

clicking the Safely Remove Hardware icon on the System

tray. After the PC Card is stopped, it is safe to remove.

2Locate the PC Card slot on the left side of the computer.

3Insert the PC Card.

Inserting a PC Card

NOTE

NOTENOTE

146

Exploring Your Options

Inserting and Removing PC Cards

When the card is almost all the way into the slot, push firmly,

but gently, to ensure a firm connection with the computer.

To avoid damaging the PC Card or the computer, do not force

the card into the PC Card slot.

Removing a PC Card

Stop the PC Card by clicking the Safely Remove Hardware

icon on the System tray. After the PC Card is stopped, it is

safe to remove.

1Locate the PC Card ejection button.

2Press the PC Card eject button once to extend it, and push

it in to remove the PC Card.

Press the PC card ejection button once to extend it

The PC Card ejects slightly from the slot.

3Grasp the edges of the PC Card and slide it out of the

slot.

Setting up a PC Card for your computer

Some PC Cards are ready to use as soon as you install them.

Others, such as hard disk cards, network cards, and SCSI

adapters, may need to be set up to work with your computer.

147

Exploring Your Options

Inserting and Removing PC Cards

To set up your PC Card, refer to the documentation that came

with the card or refer to your operating system manual or

online help.

Hot swapping

With PC Cards, you can replace one PC Card with another

while the computer is on. This is called “hot swapping.”

Hot swapping precautions

Although you can insert a PC Card at any time, to avoid data

loss never remove a card while it is in use. For example:

❖Never remove a hard disk card while the system is

accessing it.

❖Never remove a network card while you are connected to

a network.

Before removing a PC Card, stop it by clicking the Safely

Remove Hardware icon on the System tray. After the PC

Card is stopped, it is safe to remove.

148

Chapter 5

Toshiba Utilities

Your computer includes several utilities designed to help you

to reconfigure your system to best meet your individual

needs. Together, these allow you to determine certain system

details, set additional options, or change default options. This

chapter describes the utilities supplied by Toshiba:

❖Fn-esse®

❖Hotkey utility

❖TOSHIBA Console

❖TOSHIBA HW Setup

❖TOSHIBA Power Saver

❖Enabling Hibernation

❖Setting a user password

❖Setting a supervisor password

❖Using the TOSHIBA Zooming Utility

❖Using the TOSHIBA Touch and Launch utility

149

Toshiba Utilities

Fn-esse®

Desktop shortcuts and Toshiba’s Fn-esse program provide

quick ways to open programs, documents, and folders from

within any Windows program without using the Start menu.

For more information on creating desktop shortcuts, refer to

the operating system documentation that came with your

computer.

This section describes how to use the Fn-esse program to

quickly access your programs and files.

With Fn-esse, you can assign an Fn key combination to:

❖Open a Windows XP operating system program.

❖Open a file in its associated program.

❖Display a customized folder of programs and/or files

from which to choose.

Fn-esse also has several keys, known as hot keys, that

perform preassigned operations. For more information, see

“Hot Keys” on page 199.

You can assign any key that is not associated with a hot key

or a keyboard overlay.

Starting Fn-esse®

1Click Start, point to All Programs, Toshiba Utilities, then

click Fn-esse.

The Fn-esse keyboard appears.

Sample Fn-esse window

150

Toshiba Utilities

Fn-esse®

The keys are color-coded as follows:

❖Available keys are dark gray with white letters.

❖Assigned keys and keys associated with a popup list are

shown on the Fn-esse keyboard in the selected color.

❖Unavailable keys are light gray.

There are two ways to assign a key to open a program or

document:

❖Using drag-and-drop

❖Using the keyboard or pointing device

The method most often used is drag-and-drop.

Using drag-and-drop to assign a key

To assign a key to a program or document:

1Start both Fn-esse and Windows Explorer (or the program

supporting drag-and-drop).

2Resize the Explorer window so that you can see both the

Fn-esse keyboard and Explorer at the same time.

3In the Explorer window, highlight the program or

document file you wish to assign to a key.

4Click and hold the primary button as you drag the

highlighted item from Explorer to the key on the Fn-esse

keyboard to which you want to assign it.

5Release the primary button.

Fn-esse displays the Add/Edit Command dialog box with the

Description, Command Line, and Working Directory fields

automatically completed.

6Click OK to close the Add/Edit Command dialog box

with your key assignment in place.

151

Toshiba Utilities

Fn-esse®

The program or document is now associated with the key you

just selected. To open the program or document, press Fn plus

the appropriate key from within any Windows program.

Using the keyboard or pointing device to assign keys

To assign a key to open a program or document, start Fn-esse

and either:

❖Using the keyboard, press and hold the Fn key, then press

the desired assignment key.

❖Using the pointing device, move the cursor over the

desired key in the Fn-esse window and press the

secondary button.

The Assignment Type dialog box appears.

Sample Fn-esse assignment type dialog box

Making a direct key assignment

1Select Direct... to display the Add/Edit Command dialog box.

2Enter the Description, Command Line, and Working

Directory for the new Fn-esse key assignment, or click

Browse to specify this information.

3Click OK.

152

Toshiba Utilities

Fn-esse®

Making a popup assignment

1Select Popup... to display the Application Explorer dialog

box.

2Select the desired folder. The left side of the Application

Explorer window displays the folders in the Programs

menu. The right side lists the programs and documents in

the folder. These are the items that will appear in the

popup list.

3To create a popup list with items from various folders, or

to pick only a few items from a folder, create a new folder

containing only the desired programs and documents. If

you are unsure how to do this, refer to your Windows XP

operating system documentation.

4Click OK to associate the folder with the key you just

selected.

To open a popup list showing the items in that folder,

press Fn plus the appropriate key from within any

Windows program.

Viewing existing key assignments

To view the existing key assignments, choose Assignments

from the Fn-esse keyboard. Fn-esse displays the Function

Key Assignments dialog box. This box lists all the key

assignments and the program or document to which each key

is assigned.

To view items in a popup list, select the Expand popup lists

check box.

153

Toshiba Utilities

TOSHIBA Console

Changing or removing existing key assignments

In the Fn-esse keyboard, click the key you wish to change

with the secondary button.

Fn-esse displays the Assignment Type dialog box.

❖To change the key assignment, click Direct... or Popup...

and continue as if you were creating a new assignment.

❖To remove the key assignment, click Clear.

TOSHIBA Console

The TOSHIBA Console provides quick access to computer

functions and allows you to customize a range of computer

settings.

To access the control panel:

1Click Start, then click All Programs.

2Point to TOSHIBA Console, then click the resulting

Toshiba Console selection.

The TOSHIBA Console window appears.

Sample TOSHIBA Console window

154

Toshiba Utilities

TOSHIBA Console

The TOSHIBA Console offers three categories of features:

❖Customizing Your Computer

❖Network

❖Security

Customizing your computer

The features available in this category are:

❖Power Management

❖Mouse

❖Hotkey assignment (for detailed information, see

“Fn-esse®” on page 149)

❖Toshiba Hardware Settings

❖Toshiba Button Control

❖ConfigFree

Network

The features in this category are:

❖IR Utility

❖Connectivity Doctor

Security

The features available in this category are:

❖Supervisor password

❖User password

TOSHIBA Power Saver

The TOSHIBA Power Saver feature enables you to control

your computer’s power usage, regardless of the source, and

use the many preset power modes, or create one yourself.

155

Toshiba Utilities

TOSHIBA Console

To access Power Management through the TOSHIBA

Console, double-click the Power Management icon.

The TOSHIBA Power Saver Properties window appears.

Sample TOSHIBA Power Saver Properties window

The Toshiba Power Saver Properties window shows the

power profiles, which are optimized for several different

working environments.

You can either use one of the preset modes or create and use

your own customized profile. The preset profiles cannot be

deleted.

By changing the options that appear in the Toshiba Power

Saver Properties window and clicking OK, you can

reconfigure that function. Any options that you change

become effective when you click either OK or Apply.

156

Toshiba Utilities

TOSHIBA Console

Profiles

This section lists the preset profiles along with the estimated

battery life for each mode. The preset profiles are:

❖Full Power

❖High Power

❖Normal

❖DVD Playback

❖Presentation

❖Long Life

Although you can change the properties for any of these

profiles, this is not recommended. If you need a customized

profile, create a new profile with the properties you require.

The DVD Playback profile applies only when a DVD

program is playing.

Quickly creating a new power mode

1Highlight one of the preset profiles.

2Click Copy.

3A new mode appears with the title “Copy of Name”

where Name is the title of the mode you copied. You can

change the name, description, or icon for this profile by

clicking Property.

Customizing a power mode

1Highlight the profile you want to modify.

2Change the settings you want on the Basic Setup tab.

3You may also change settings on the Setup Action tab.

Keep in mind however, that by default, these actions will

apply to all profiles.

157

Toshiba Utilities

TOSHIBA Console

Mouse utility

The Mouse utility allows you to change your TouchPad or

mouse settings. To access the Mouse utility through the

TOSHIBA Console, double-click the Mouse icon.

Hotkey utility

The Hotkey utility allows you to receive a confirmation

message when you use the Hotkey combination for Standby

[Fn+F3 Fn+F4] and Hibernation [ ].

To activate:

1Click Start, , All Programs Toshiba, Utilities, then click the

Hotkey utility.

The Toshiba Hotkey window appears.

Sample Toshiba Hotkey utility window

2Select the desired option.

3Click OK.

158

Toshiba Utilities

TOSHIBA Console

TOSHIBA HW Setup

TOSHIBA HW Setup is the Toshiba configuration

management tool available through Windows. To access it,

open the Start menu, click Control Panel, then Printers and

Other Hardware. Then click the Toshiba HWSetup icon.

Sample TOSHIBA HWSetup window

The tabs represent various dialog boxes. They are:

❖General—Allows you to view current BIOS, hard disk

drive and memory settings

❖Password—Allows you to set the user password and an

owner string

❖Parallel/Printer — Allows you to configure the parallel

port default settings (if applicable to your system)

❖Display — Allows you to change various default settings

for the built-in LCD display

159

Toshiba Utilities

TOSHIBA Console

❖CPU — Allows you to change the dynamic CPU

frequency mode

Dynamically Switchable—This mode is the default setting

for your computer, and automatically changes the processing

frequency and decreases voltage depending on the power

source:

❖AC Power—If your computer is connected to the AC

adapter, the CPU frequency mode is set to high for faster

processing.

❖Battery Power—If your computer is running on battery

power, the CPU frequency mode is set to low, for slower

processing. Switching the CPU to low allows you to

conserve power and extend the operating time of your

battery.

❖USB — Allows you to enable or disable USB Legacy

Emulation.

❖Device Config — Shows the Device configuration

options.

❖Boot Priority—Allows you to change the sequence in

which your computer searches the drives for the

operating system

❖Keyboard — Allows you to configure an external PS/2

keyboard to emulate the Fn function key and access the

wake-on keyboard function

❖LAN—Allows you to set networking functions

By changing any of the options that appear in the dialog

boxes and clicking Apply, you can reconfigure that function.

Any options that you change will become default settings

when you restart your system.

160

Toshiba Utilities

Enabling Hibernation

Your computer includes a Toshiba Power Saver utility that

allows you to change many of your default power settings.

You can enable hibernation through this utility.

To power down the computer using the Hibernation option,

click Start, select Turn off computer. When you hold down

the Shift key, the Standby button changes to Hibernate. Hold

down the Shift key, then select Hibernate.

The computer saves the state of the system, including all open

programs and files, to the hard disk, and then powers down

completely.

TECHNICAL NOTE: Toshiba recommends that you always have

the Hibernation option enabled. Hibernation is the function

that causes your system to save anything you have in short-

term memory to the hard disk drive should your battery fail. If

Hibernation is not enabled and your battery discharges, you

will lose data.

Setting passwords

Setting a password leaves your computer secure so that

nobody can access your files. You must enter the password

before you can work on your computer.

Toshiba supports the several types of passwords on your

computer:

❖An instant password — Secures your open programs and

files when leaving the computer temporarily

❖A power-on password — Prevents unauthorized users

from starting or restarting the computer

❖A supervisor password — Prohibits unauthorized users

from accessing certain functions such as Toshiba

161

Toshiba Utilities

Setting passwords

Hardware Setup. This is useful if more than one person

uses the computer.

A single user password supports the instant and power-on

password functions.

When setting up the various passwords, keep the following in

mind:

❖The user password can be set up under the supervisor

password.

❖The supervisor password must be set before the user

password, or the user password must be deleted and then

re-entered after the supervisor password is set.

TECHNICAL NOTE: When you delete the supervisor password,

the user password is also deleted.

Using an instant password

An instant password secures your system with a single

keystroke. Use this feature when you leave your desk for a

few minutes and do not want to turn off the computer.

To use an instant password, press Fn, then press F1. This

freezes the keyboard and TouchPad, and blanks the screen.

An instant password has no effect on an optional USB mouse

or trackball.

To unlock your system, press any key or the TouchPad and

the Windows Logon screen appears. Select your user name

and enter your password, if any.

162

Toshiba Utilities

Setting passwords

Setting a user password

To register a password for the power-on password functions:

1Click Start, the click All Programs.

2Point to TOSHIBA Console, then click the resulting

TOSHIBA Console selection.

The TOSHIBA Console window appears.

3On the left side, select Security.

4Select the User Password icon.

5Click Set.

6Type your password in the Input box.

7Retype your password in the Input again box.

8Click Set.

9Click OK.

Disabling a user password

To cancel the power-on password function:

1Click Start, the click All Programs.

2Point to TOSHIBA Console, then click the resulting

TOSHIBA Console selection.

The TOSHIBA Console window appears.

3On the left side, select Security.

4Select the User Password icon.

5Select Verify by Password.

6Type the correct password.

7Click Delete.

8Click OK.

163

Toshiba Utilities

Setting passwords

Setting a supervisor password

A supervisor password prevents other users from changing

hardware configuration options.

To register a password for the power-on password functions:

1Click Start, the click All Programs.

2Point to TOSHIBA Console, then click the resulting

TOSHIBA Console selection.

The TOSHIBA Console window appears.

3On the left side, select Security.

Sample TOSHIBA Console Security window

164

Toshiba Utilities

Setting passwords

4Select the Supervisor Password icon.

5Click Set.

6Type your password in the Input box.

7Retype your password in the Input again box.

8Click Set.

9Click OK.

Deleting a supervisor password

To cancel the power-on password function:

1Click Start, the click All Programs.

2Point to TOSHIBA Console, then click the resulting

TOSHIBA Console selection.

The TOSHIBA Console window appears.

3On the left side, select Security.

4Select the Supervisor Password icon.

5Select Verify by Password.

6Select the Supervisor Password tab.

7Type the correct password.

8Click Verify.

9Click Delete.

10 Select Verify by Password.

11 Type the correct password.

12 Click Verify.

165

Toshiba Utilities

Using the TOSHIBA Zooming Utility

This utility allows you zoom in and zoom out of applications

as well as the icons for Microsoft® Internet Explorer,

Microsoft® Office, Windows Media Player, and Adobe®

Reader.

To access the utility, click Start, All Programs, Toshiba,

Utilities, and then TOSHIBA Zooming Utility.

The TOSHIBA Zooming Utility screen appears.

Sample TOSHIBA Zooming Utility screen

166

Toshiba Utilities

Using the TOSHIBA Touch and Launch utility

TOSHIBA Touch and Launch is a program that adds features

to the TouchPad. For example, by selecting an icon you can:

❖Open a document

❖Launch a program

❖Show a list of windows and switch the active window

❖Open Internet Explorer favorites

TOSHIBA Touch and Launch is like a miniature Windows

desktop. You can personalize TOSHIBA Touch and Launch

to help you work more efficiently.

To activate TOSHIBA Touch and Launch, touch and hold

your finger on a corner of the TouchPad. The TOSHIBA

Touch and Launch window appear.s

Sample TOSHIBA Touch and Launch window

A blue circle within the TOSHIBA Touch and Launch

window represents your finger location on the TouchPad. As

you move the blue circle over an icon in the TOSHIBA Touch

and Launch window, the icon is highlighted or selected.

Release your finger from a selected icon to choose the icon's

function. If the icon is highlighted in orange and selected, the

function corresponding to the selected icon will be launched

and the TOSHIBA Touch and Launch window will be closed.

167

Toshiba Utilities

Using the TOSHIBA Touch and Launch utility

If the icon is highlighted in blue and selected, the function

corresponding to the selected icon will be launched and the

TOSHIBA Touch and Launch window will remain open.

To close the TOSHIBA Touch and Launch window, release

your finger when the blue circle is not on any icon. Or,

highlight the Close icon in the upper right of the TOSHIBA

Touch and Launch window.

The TOSHIBA Touch and Launch window has the following

parts:

Sample parts of the TOSHIBA Touch and Launch window

A short description of the currently selected corner icon

appears below the TOSHIBA Touch and Launch window.

The title and functions can change when you select one of the

corner icons.

The type and number of icons you see in the main part of the

TOSHIBA Touch and Launch window is determined by

which of the corner icons you select.

Corner icons

Back button Close button

Title

Functions

Main window

168

Toshiba Utilities

Using the TOSHIBA Touch and Launch utility

TOSHIBA Touch and Launch is controlled/adjusted via an

icon on the system tray. The icon will change color when the

TOSHIBA Touch and Launch is active. Double-click the icon

to open the TOSHIBA Touch and Launch Settings window.

Right-click the icon to see the following shortcut menu:

❖Settings

The Settings function allows you to define the functions/

features you can access in TOSHIBA Touch and Launch

❖Disable/Enable

❖Help

❖About

TOSHIBA Touch and Launch Settings

When you choose the Settings shortcut menu entry, the

TOSHIBA Touch and Launch Settings window appears.

Sample TOSHIBA Touch and Launch Settings window

169

Toshiba Utilities

Using the TOSHIBA Touch and Launch utility

In the Corner Assignment section you can change the icons

you see at the four corners of the TOSHIBA Touch and

Launch window using the drop-down list boxes. The icons

are referred to as tables in the TOSHIBA Touch and Launch

Settings dialog.

The Touch Pad settings button allows you to define how

sensitive the TouchPad will be to your finger on the TouchPad

before it actives the TOSHIBA Touch and Launch window.

The Window settings button allows you to control the size

and transparency of the TOSHIBA Touch and Launch

window.

The Option button allows you to define how folders will

open, define visual affects and control when to show help.

A list of tables appears in the Table section of the TOSHIBA

Touch and Launch Settings window. These are the same

items (icons) you can choose in the Corner Assignment

section of the TOSHIBA Touch and Launch Settings. As you

select a table, the Settings button may become active. Not all

tables have settings.

The New Table button allows you to create a new table.

The Delete button deletes the selected table.

Disabling or enabling TOSHIBA Touch and Launch

You can set/clear the Disable TOSHIBA Touch and Launch

check box in the TOSHIBA Touch and Launch Settings

window to disable/enable the TOSHIBA Touch and Launch

feature. You can also disable/enable TOSHIBA Touch and

Launch via the TOSHIBA Touch and Launch icon on the

system tray.

170

Chapter 6

If Something Goes

Wrong

Some problems you may encounter when using your

notebook computer are relatively easy to identify and solve.

Others may require help from your dealer or the manufacturer

of a software program.

This chapter aims to help you solve many problems by

yourself. It covers the problems you are most likely to

encounter. If all else fails, contact Toshiba. You will find

information on Toshiba’s support services at the end of this

chapter.

Problems that are easy to fix

Your program stops responding.

If you are working with a program that suddenly freezes all

operations, chances are the program has stopped responding.

You can exit the failed program without shutting down the

operating system or closing other programs.

To close a program that has stopped responding:

1Press Ctrl, Alt, and Del simultaneously (once).

The Windows Task Manager window appears.

171

If Something Goes Wrong

Problems that are easy to fix

2Click the Applications tab.

If a program has stopped responding, the words “not

responding” appear beside its name in the list.

3Select the program you want to close, then click End

Task.

Closing the failed program should allow you to continue

working. If it does not, continue with step 4.

4Close the remaining programs one by one by selecting

the program name, then End Task.

5Click Start, Turn off computer.

6The Turn off computer window appears.

7Click Turn off.

The computer turns off.

Your program performs an illegal operation.

If you receive the message, “Your program has performed an illegal

operation,” you should record the details of the message and

consult the software manufacturer.

To record the details:

1Click the Details button and select the text the operating

system displays.

The Details button displays information that the software

manufacturer needs to help you solve your problem.

2Press Ctrl c and simultaneously to copy the text to the

clipboard.

3Open Notepad (click Start, point to All Programs, then

point to Accessories and click Notepad).

4Press Ctrl v and simultaneously to paste the details into

Notepad.

172

If Something Goes Wrong

Problems when you turn on the computer

5Add a paragraph break and type some notes describing

what you were doing when you received the message.

6Save the file and refer to it when you contact the software

manufacturer.

Problems when you turn on the computer

These problems may occur when you turn on the power.

The computer will not start.

Make sure you attached the AC adapter and power cable

properly or installed a charged battery.

Press and hold down the power button for a few seconds.

If you are using the AC adapter, check that the wall outlet is

working by plugging in another device, such as a lamp.

The computer starts but, when you press a key, nothing

happens.

You are probably in Stand By mode and have a software or

resource conflict. When this happens, turning the power on

returns you to the problem instead of restarting the system.

To clear the condition, press Ctrl, Alt, and Del simultaneously.

Clearing the condition may get the computer running, but it

will not solve a resource conflict. Read the documentation

that came with the conflicting device and “Resolving a

hardware conflict” on page 176.

The computer is not accessing the hard disk or the

external diskette drive.

Your computer normally loads the operating system from the

hard disk. If you have a hard disk problem, you will not be

able to start the computer. Insert a system diskette into the

external diskette drive and press F12 when the machine starts,

and then use the arrow keys to select the boot-up device.

173

If Something Goes Wrong

The Windows

® operating system is not working

The computer displays the WARNING RESUME FAILURE

message.

The computer was placed in Stand By mode and the battery

has discharged. Data stored in the computer’s memory has

been lost.

To charge the battery, leave the computer plugged into a live

wall outlet for several hours. For more information, see

“Power and the batteries” on page 181.

The computer displays the Non-System disk or disk error message.

Make sure there is no diskette in the diskette drive. If there is

one, remove it and press any key to continue. If pressing any

key does not work, press Ctrl, Alt, and Del to restart the

computer.

The Windows® operating system is not

working

Once you are familiar with the desktop and used to the way

the operating system responds to your work routine, you can

easily detect if the operating system is not working correctly.

For example:

❖The operating system fails to start after the Starting

Windows XP message appears.

❖The operating system takes a long time to start.

❖The operating system responds differently from the

normal routine.

❖The screen does not look right.

Unless a hardware device has failed, problems usually occur

when you change the system in some way such as installing a

new program or adding a device.

If you experience any of these problems, use the options in

the Startup menu to fix the problem.

174

If Something Goes Wrong

The Windows

® operating system is not working

Using Startup options to fix problems

If the operating system fails to start properly, you may have to

change your system’s configuration or verify the startup

procedure to fix the problem. To do this, use the options in

the Startup menu. This section describes each option and

when to use the procedure.

To open the Startup menu:

1Restart your computer.

2Press F8 when your computer starts.

The Windows Advanced Options menu displays these

options:

❖Safe Mode

❖Safe Mode (with Networking)

❖Safe Mode (with Command Prompt)

❖Enable Boot Logging

❖Enable VGA Mode

❖Last known good configuration (your most recent

settings that worked)

❖Directory Services Restore Mode (Windows domain

controllers only)

❖Debugging Mode

❖Start Windows normally

❖Reboot

❖Return to OS Choices (menu)

175

If Something Goes Wrong

The Windows® operating system is not working

See your Windows documentation for further explanation.

TECHNICAL NOTE: If your computer is connected to a

network, the Startup menu may display different versions of

Safe mode.

Internet problems

These are some typical problems and recommended

solutions:

My Internet connection is very slow.

Many factors contribute to the speed with which you can surf

the Internet. They include: modem speed, time of day (when

everyone else is surfing, your access can be slow) and

popularity of the site. If accessing a particular site is very

slow, try later.

My browser cannot find the URL address I typed in.

Make sure you separated the domain names of the address

with the forward slash (/). Check the spelling of each name

and the syntax of the address carefully. A single incorrect

letter or missed character, comma instead of period (“dot”) or

other mistake makes it impossible for your browser to locate

the site.

My browser cannot find a site I bookmarked.

The World Wide Web is constantly changing. A site you

bookmarked yesterday may not be available today or its

server may be down for temporary repair. Try again later.

The Windows® XP operating system can help you

If the operating system has started properly, but you still have

a problem using your computer, the online Help can assist

you in troubleshooting the problem.

176

If Something Goes Wrong

Resolving a hardware conflict

To access Windows XP Help and Support:

1Click Start, then click Help and Support.

The Help and Support Centre window appears.

2Then do one or both of the following:

❖In the search field, type in the topic of the problem

with which you need help and follow the on-screen

instructions.

❖Click a problem you would like help with from the

listings and follow the on-screen instructions.

You can connect to Support Online by clicking Support from

the menu.

Resolving a hardware conflict

If you receive an error message telling you there is a device

driver conflict or a general hardware problem, try using

Windows Help and Support to troubleshoot the problem first.

For help on hardware conflicts:

1Click Start, then click Help and Support.

2Click the Hardware link in the window’s left pane.

A list of category links appear.

3Click Fixing a hardware problem.

4Choose from specific topics and follow the steps.

If there is still a problem, the operating system should display

a message that explains what the conflict is.

A plan of action

The smooth operation of the system depends on the

interaction of all devices, programs, and features. If the

system or one of its attached devices is not working,

resolving the problem can be time-consuming and frustrating.

177

If Something Goes Wrong

Resolving a hardware conflict

The recommended procedure for getting multiple devices to

work together is to add and set up one device at a time. After

you add each device, test it to make sure it and all previously

connected devices work.

The device most recently connected to the system is the one

most likely to be causing a hardware conflict.

Resolving hardware conflicts on your own

Computer components need resources to accomplish a task.

A device, such as a disk drive or a modem, needs a channel to

the computer’s Central Processing Unit (CPU). It also needs a

direct channel to the computer’s memory to store information

as it works. These channels of communication are commonly

referred to as system resources.

Interrupt Request Channel

The channel to the CPU is called an Interrupt Request (IRQ)

because it interrupts what the processor is doing and requests

some of the processor’s time.

Direct Memory Access

Similarly, the data required by the device is stored in a

specific place or address in memory called the Direct

Memory Access (DMA). The DMA provides a dedicated

channel for adapter cards to bypass the microprocessor and

access memory directly. If two or more devices use the same

DMA, the data required by one device overwrites the data

required by the other, causing a hardware conflict.

Plug and Play

With Plug and Play and the Windows® XP operating system,

avoiding hardware conflicts is easy. Plug and Play is a

computer standard that helps the system BIOS (basic input/

output system) and the operating system to automatically

assign resources to Plug and Play-compliant devices. In

theory, if every device connected to the computer is Plug and

178

If Something Goes Wrong

Resolving a hardware conflict

Play-compliant, no two devices will compete for the same

system resources. Simply plug in the device and turn on your

computer. The operating system automatically sets up your

system to accommodate the new device.

If you install an older (legacy) device that the operating

system cannot recognize, the operating system may have

difficulty assigning resources to it. As a result, a hardware

conflict can occur. To see what resources the operating

system has assigned to the device, see “Checking device

properties” on page 179.

Resolving conflicts

There are three things you can do to resolve hardware

conflicts:

❖Disable the device.

For an older device, remove it from the computer.

❖Disable another system component and use its resources

for the new device, see “Fixing a problem with Device

Manager” on page 178.

❖Reconfigure the device so that its requirements do not

conflict. Refer to the device’s documentation for

instructions about changing settings on the device.

Fixing a problem with Device Manager

Device Manager provides a way to check and change the

configuration of a device.

Changing the default settings using Device Manager can

cause other conflicts that make one or more devices unusable.

Device Manager is a configuration tool for advanced users

who understand configuration parameters and the

ramifications of changing them.

179

If Something Goes Wrong

Resolving a hardware conflict

Disabling a device

1Open the Start menu, click Control Panel then

Performance and Maintenance.

2Click the Administrative Tools icon.

3Click Computer Management and then Device

Manager.

4Select the specific device from the device category.

5In the toolbar, look to the far right for an icon of a

monitor with a strike mark through a circle on the front.

This is the disable feature.

6Click the icon.

You are given the option of disabling the device.

7Click Ye s or No, whichever is appropriate.

Checking device properties

Device Manager provides a way to view the properties of a

device. Properties include the name of the manufacturer, the

type of device, the drivers installed, and the system resources

assigned to the device.

To check a device’s properties:

1Open the Start menu, click Control Panel.

2Click Performance and Maintenance, and then

Administrative Tools.

3Click the Computer Management icon.

4Click the Device Manager button.

5To view the device(s) installed, double-click the device

type.

6To view the properties, double-click the device.

The operating system displays the Device Properties dialog

box, which provides an array of tabs. They include:

180

If Something Goes Wrong

Resolving a hardware conflict

❖The General tab, which provides basic information about

the device.

❖The Resource tab, which lists resources assigned to the

monitor, DVD-ROM, multi-function drive, disk drive,

and other functions that consume power.

❖The Drivers tab, which displays the drivers being used by

the device.

A Troubleshooting button is also present.

Click Troubleshoot...

A Help and Support Centre window for that device

appears.

For more information about Device Manager, refer to

Windows XP online help.

Memory problems

Incorrectly connected or faulty memory modules may cause

errors that seem to be device-related.

These are some typical problems and recommended

solutions:

1Click Start, then click Turn off computer.

2Click Turn Off.

The operating system shuts down and turns off the computer

automatically.

3Remove the memory module.

4Reinstall the memory module, following the instructions

in “Installing additional memory (optional)” on page 57,

and making sure it is seated properly.

5Check for the error again.

6If the error recurs, remove the memory module entirely

and check for the error again.

181

If Something Goes Wrong

Resolving a hardware conflict

If removing the memory module eliminates the error, the

memory module may be faulty. If the error recurs without the

memory module installed, the error is not caused by the

memory module.

TECHNICAL NOTE: You must have a least one memory

module installed for the computer to work.

Power and the batteries

Your computer receives its power through the AC adapter and

power cable or from the system batteries (main battery and

real-time clock (RTC) battery). Power problems are

interrelated. For example, a faulty AC adapter or power cable

will neither power the computer nor recharge the batteries.

These are some typical problems and recommended

solutions:

The AC power light does not come on when you plug in

the AC adapter and power cable.

Make sure the AC adapter and power cable are firmly

plugged into both a live electrical outlet and the computer.

If the AC power light still does not come on, check that the

electrical outlet is working properly by plugging in a lamp or

other appliance.

The AC adapter and power cable work correctly, but the

battery will not charge.

The battery does not charge while the computer is consuming

full power. Try turning off the computer.

The main battery may not be inserted correctly in the

computer. Turn off the computer, remove the battery, clean

the contacts with a soft dry cloth (if necessary) and replace

the battery.

182

If Something Goes Wrong

Resolving a hardware conflict

The battery may be too hot or too cold to charge properly. If

you think this is the probable cause, let the battery reach

room temperature and try again.

If the battery has completely discharged, it will not begin

charging immediately. Leave the AC adapter and power cable

connected, wait 20 minutes and see if the battery is charging.

If the battery light is glowing after 20 minutes, let the

computer continue charging the battery for at least another 20

minutes before you turn on the computer.

If the battery light does not glow after 20 minutes, the battery

may have reached the end of its useful life. Try replacing it.

The battery does not power the computer for as long as

it used to.

If you frequently recharge a partially charged battery, it may

not charge fully. Let the battery discharge completely, then

try charging it again.

Check the power options using the Power Management

utility. Have you added a device, such as a PC Card or

memory module, that takes its power from the battery? Is

your software using the hard disk more? Is the display power

set to turn off automatically? Was the battery fully charged to

begin with? All these conditions affect how long the charge

lasts.

Keyboard problems

If, when you type, strange things happen or nothing happens,

the problem may be related to the keyboard itself.

These are some typical problems and recommended

solutions:

The keyboard produces unexpected characters.

A keypad overlay may be on. If the numeric keypad or cursor

control light is on, press Fn F10 and simultaneously to turn off

the cursor control light or press Fn and F11 simultaneously to

turn off the numeric keypad light.

183

If Something Goes Wrong

Resolving a hardware conflict

If the problem occurs when both the keypad overlays are off,

make sure the software you are using is not remapping the

keyboard. Refer to the software’s documentation and check

that the program does not assign different meanings to any of

the keys.

You have connected an external keyboard and the

operating system displays one or more keyboard error

messages.

If you have a second keyboard, try it. If it works, the first

keyboard may be defective or incompatible with your

computer.

Display problems

These are some typical problems and recommended

solutions:

The display is blank.

Display Auto Off may have gone into effect. Press any key to

activate the screen.

You may have activated the instant password feature by

pressing Fn and F1 simultaneously. If you have registered a

password, press the Enter key, type the password and press Enter.

If no password is registered, press Enter. The screen reactivates

and allows you to continue working.

If you are using the built-in screen, make sure the display

priority is not set for an external monitor. To do this, hold the

Fn key and press F5 twice. A window with display choices

pops up. Hold the Fn key and press F5 twice again to advance

through the display options.

If you are using an external monitor:

❖Check that the monitor is turned on.

❖Check that the monitor’s power cable is firmly plugged

into a live electrical outlet.

184

If Something Goes Wrong

Resolving a hardware conflict

❖Check that the cable connecting the external monitor to

the computer is firmly attached.

❖Try adjusting the contrast and brightness controls on the

external monitor.

❖Press Fn and F5 simultaneously to make sure the display

priority is not set for the built-in screen.

The screen does not look right.

You can change the display settings by clicking a blank area

of the desktop with the secondary control button, then

clicking Properties. This opens the Display Properties dialog

box. The Appearance tab of this dialog box allows you to

choose the colors for the screen. The Settings tab allows you

to choose the screen resolution.

The built-in screen flickers.

Some flickering is a normal result of the way the screen

produces colors. To reduce the amount of flickering, try using

fewer colors.

To change the number of colors displayed:

1Point at the desktop and click with the secondary button.

2Click Properties, and then the Settings tab.

3Change the Colors option and click OK.

For more information, see Windows Help.

A message tells you that there is a problem with your

display settings and that the adapter type is incorrect or

the current settings do not work with your hardware.

Reduce the size of the color palette to one that is supported by

the computer’s internal display.

To change the display properties:

1Point at the desktop and click with the secondary button.

The Display Properties window appears.

185

If Something Goes Wrong

Resolving a hardware conflict

2Click Properties, then click the Settings tab.

3Adjust the screen resolution and/or color quality.

4 Click OK.

The display mode is set to Simultaneous and the external

display device does not work.

Make sure the external monitor is capable of displaying at

resolutions of 800 x 600 or higher. Devices that do not

support this resolution will only work in Internal/External

mode.

Small bright dots appear on your TFT display when you

turn on your computer.

Your display contains an extremely large number of thin-film

transistors (TFT) and is manufactured using high-precision

technology. The small bright dots that appear on your display

are an intrinsic characteristic of the TFT manufacturing

technology.

Over a period of time, and depending on the usage of the

computer, the brightness of the LCD Screen will

deteriorate. This is an intrinsic characteristic of LCD

technology.

Screen will dim when the computer is operated on battery

power and you may not be able to increase the brightness of

the screen.

Disk drive problems

Problems with the hard disk or with a diskette drive usually

show up as an inability to access the disk or as sector errors.

Sometimes a disk problem may cause one or more files to

appear to have garbage in them.

These are some typical problems and recommended

solutions:

NOTE

NOTENOTE

186

If Something Goes Wrong

Resolving a hardware conflict

You are having trouble accessing a disk, or one or more

files appear to be missing.

Make sure you are identifying the drive by its correct name

(A: or C:).

Error-checking

Run Error-checking, which analyzes the directories, files and

File Allocation Table (FAT) on the disk and repairs any

damage it finds:

To run Error-checking:

1Click Start, then click My Computer.

2Right-click the drive you want to check and select

Properties from the menu.

The drive’s properties box appears.

3Click the Tools tab.

4Click the Check now button.

The Check Disk All Apps box appears.

5You can choose one or both options:

❖Automatically fix file system errors

❖Scan for and attempt recovery of bad sectors

6Click Start.

Error-checking runs the test.

Your hard disk seems very slow.

If you have been using your computer for some time, your

files may have become fragmented. Run Disk Defragmenter.

To do this, click Start, then click All Programs, point to

Accessories Disk and System Tools, and click

Defragmenter.

187

If Something Goes Wrong

Resolving a hardware conflict

Your data files are damaged or corrupted.

Refer to your software documentation for file recovery

procedures. Many software packages automatically create

backup files.

You may also be able to recover lost data using utility

software, which is available from your dealer.

Some programs run correctly but others do not.

This is probably a configuration problem. If a program does

not run properly, refer to its documentation and check that the

hardware configuration meets its needs.

A diskette will not go into the external diskette drive.

You may already have a diskette in the drive. Make sure the

drive is empty.

You may be inserting the diskette incorrectly. Hold the

diskette with the hub side facing down, and insert it so that

the metal head window cover goes into the drive first.

The metal cover or a loose label may be obstructing the path

into the drive. Carefully inspect the diskette. If the metal

cover is loose, replace the diskette. If the label is loose,

replace the label and try inserting the diskette again.

The computer displays the Non-system disk or disk error

message.

If you are starting the computer from a diskette, the diskette

in the drive does not have the files necessary to start the

computer. Replace it with a bootable diskette.

The drive cannot read a diskette.

Try another diskette. If you can access the second diskette,

the first diskette (not the drive) is probably causing the

problem. Run Error-checking on the faulty diskette (for

instructions, see “Disk drive problems” on page 185).

188

If Something Goes Wrong

Resolving a hardware conflict

DVD-ROM or multi-function drive problems

These are some typical problems and recommended

solutions:

You cannot access a disc in the drive.

Make sure the drive tray has closed properly. Press gently

until it clicks into place.

Open the drive tray and remove the disc. Make sure the drive

tray is clean. Any dirt or foreign object can interfere with the

laser beam.

Examine the disc to see whether it is dirty. If necessary, wipe

it with a clean damp cloth dipped in water or a neutral

cleaner.

Replace the disc in the tray. Make sure it is lying flat, label

side uppermost. Press the disc down until it locks on the

spindle. Close the drive tray carefully, making sure it has shut

completely.

You press the disc eject button, but the drive tray does

not slide out.

Make sure the computer is connected to a power source and

turned on. The DVD-ROM or multi-function drive eject

mechanism requires power to operate.

To remove a disc without turning on the computer, use a

narrow object, such as a straightened paper clip, to press the

manual eject button. This button is in the small hole next to

the disc eject button on the front of the DVD or multi-

function drive.

Some discs run correctly, but others do not.

If the problem is with an application CD-ROM, refer to the

software’s documentation and check that the hardware

configuration meets the program’s needs.

189

If Something Goes Wrong

Resolving a hardware conflict

Sound system problems

These are some typical problems and recommended

solutions:

You do not hear any sound from the computer.

Adjust the volume control.

If you are using external headphones or speakers, check that

they are securely connected to your computer.

The computer emits a loud, high-pitched noise.

This is feedback between the microphone and the speakers. It

occurs in any sound system when input from a microphone is

fed to the speakers and the speaker volume is too loud. Adjust

the volume control.

Changing the settings for the Record Monitor feature in the

Recording Control Utility (default Off), or the Mute feature

in the Mixer Utility (default Enabled), may cause feedback.

Revert to the default settings.

PC Card problems

PC Cards (PCMCIA-compatible) include many types of

devices, such as a removable hard disk, additional memory,

or a pager.

Most PC Card problems occur during installation and setup

of new cards. If you are having trouble getting one or more of

these devices to work together, several sections in this chapter

may apply.

Resource conflicts can cause problems when using PC Cards.

See “Inserting and Removing PC Cards” on page 144 for

more information.

Card Information Structure

When you insert a PC Card into a slot, the computer attempts

to determine the type of card and the resources it requires by

reading its Card Information Structure (CIS). Sometimes the

190

If Something Goes Wrong

Resolving a hardware conflict

CIS contains enough information for you to use the card

immediately.

Other cards must be set up before you can use them. Use the

Windows XP PC Card (PCMCIA) Wizard to set up the card.

Refer to your Microsoft® documentation for more

information, or refer to the documentation that came with the

PC Card.

Some card manufacturers use special software called

enablers to support their cards. Enablers result in

nonstandard configurations that can cause problems when

installing the PC Card.

If your system does not have built-in drivers for your PC Card

and the card did not come with an operating system driver, it

may not work with the operating system. Contact the

manufacturer of the PC Card for information about using the

card under the operating system.

PC Card checklist

❖Make sure the card is inserted properly into the slot.

See “Inserting and Removing PC Cards” on page 144 for

information about how to insert PC Cards.

❖Make sure all cables are securely connected.

❖Occasionally a defective PC Card slips through quality

control. If another PCMCIA-equipped computer is

available, try the card in that machine. If the card

malfunctions again, it may be defective.

191

If Something Goes Wrong

Resolving a hardware conflict

Resolving PC Card problems

These are some typical problems and recommended

solutions:

The slots are not working. PC Cards that used to work

no longer work.

Check the PC Card status:

1Click Start.

2Click the My Computer icon with the secondary button,

then click Properties.

The System Properties dialog box appears.

3Click the Hardware tab.

4Click the Device Manager button.

5Double-click the PCMCIA adapter.

6Double-click the appropriate PC Card.

The operating system displays your Properties dialog box for

you PC Card, which contains information about your PC

Card configuration and status.

The computer stops working (hangs) when you insert a

PC Card.

The problem may be caused by an I/O (input/output) conflict

between the PCMCIA socket and another device in the

system. Use Device Manager to make sure each device has its

own I/O base address. See “Fixing a problem with Device

Manager” on page 178 for more information.

Since all PC Cards share the same socket, each card is not

required to have its own address.

Hot swapping (removing one PC Card and inserting

another without turning the computer off) fails.

Follow this procedure before you remove a PC Card:

192

If Something Goes Wrong

Resolving a hardware conflict

1Double-click the PC Card icon on the taskbar.

2Click Safely remove xxxx, where xxxx is the identifier

for your PC Card.

The operating system displays a message that you may safely

remove the card.

3Remove the card from the slot.

Never swap modules when the computer is in Hibernation or

Standby mode. This is known as “warm swapping” and is not

supported with this computer For more information on

Hibernation and Standby modes, see.“Using Hibernation

Mode” on page 107 and “Using Standby Mode” on page 108

The system does not recognize your PC Card.

Refer to the PC Card documentation.

Removing a malfunctioning card and reinstalling it can

correct many problems.

A PC Card error occurs.

Reinsert the card to make sure it is properly connected.

If the card is attached to an external device, check that the

connection is secure.

Refer to the card’s documentation, which should contain a

troubleshooting section.

Printer problems

These are some typical problems and recommended

solutions:

The printer will not print.

Check that the printer is connected to a live electrical outlet,

turned on and ready (online).

193

If Something Goes Wr

Resolving a hardwa

5.375 x 8.375 ver 2.3

Check that the printer ha

not start printing wh

paper left in the tray

Make sure the printe

and the printer.

Run the printer’ s self-te

printer itself.

Make sure you insta

in “Setting up your p

You may have conne

Disable Stand By m

the printer . T urn ththen turn the computTry printing another attempt to print a shofile prints correctly ,If you cannot resolvmanufacturer .

The printer will not print what you see on the screen.

Many programs displayfrom the way they prpreview mode. This mowill print. Contact thinformation.

Modem problems

These are some typisolutions:

The modem will not receive or transmit properly .

Make sure the cable firmly connected to telephone line jack.

194

If Something Goes Wrong

Develop good computing habits

Check the port settings to make sure the hardware and

software are referring to the same COM port.

Check the communications parameters (baud rate, parity, data

length and stop bits) specified in the communications

program. It should be set up to transmit at 300, 1200, 2400,

4800, 9600, 14400, 28800, 33600 bps (bits per second) or

higher. Refer to the program’s documentation and the modem

manual for information on how to change these settings.

The modem is on, set up properly and still will not

transmit or receive data.

Make sure the line has a dial tone. Connect a telephone

handset to the line to check this.

The other system may be busy or off line. Try making a test

transmission to someone else.

Develop good computing habits

Make sure you are prepared.

Save your work frequently.

You can never predict when your computer will lock, forcing

you to close a program and lose unsaved changes. Many

software programs build in an automatic backup, but you

should not rely solely on this feature. Save your work! See

“Computing tips” on page 77 for instructions.

On a regular basis, back up the information stored on

your hard disk.

Here are some ways you can do this:

❖Copy files to diskette or writable optical media, following

the steps in “Saving your work” on page 86.

❖Connect a tape drive to the system and use specialized

software to copy everything on the hard disk to a tape.

195

If Something Goes Wrong

If you need further assistance

Some people use a combination of these methods, backing up

all files to tape weekly and copying critical files to diskette on

a daily basis.

If you have installed your own programs, you should back up

these programs as well as your data files. If something goes

wrong that requires you to reformat your hard disk and start

again, reloading all your programs and data files from a

backup source will save time.

Read the user’s guides.

It’s very difficult to provide a fail-safe set of steps you can

follow every time you experience a problem with the

computer. Your ability to solve problems will improve as you

learn about how the computer and its software work together.

Get familiar with all the user’s guides provided with your

computer, as well as the manuals that come with the

programs and devices you purchase.

Your local computer store or book store sells a variety of self-

help books you can use to supplement the information in the

manuals.

If you need further assistance

If you have followed the recommendations in this chapter and

are still having problems, you may need additional technical

assistance. This section contains the steps to take to ask for

help.

Before you call

Since some problems may be related to the operating system

or the program you are using, it is important to investigate

other sources of assistance first.

Try the following before contacting Toshiba:

❖Review the troubleshooting information in your

operating system documentation.

196

If Something Goes Wrong

If you need further assistance

❖If the problem occurs while you are running a program,

consult the program’s documentation for troubleshooting

suggestions. Contact the software company’s technical

support group for their assistance.

❖Consult the dealer from whom you purchased your

computer and/or program. Your dealer is your best source

for current information.

Detailed system specifications are available at

www.ts.toshiba.com by selecting your particular product and

model number, clicking GO, and then clicking the Detailed

Specs link from the menu on the left, or just refer to the

computer documentation shipped with your product.

For the number of a Toshiba dealer near you in the United

States, call: (800) 457-7777.

Contacting Toshiba

If you still need help and suspect that the problem is

hardware-related, Toshiba offers a variety of resources to help

you.

To stay current on the most recent software and hardware

options for your computer, and for other product information,

be sure to regularly check the Toshiba Web site at

pcsupport.toshiba.com.

Toshiba voice contact

Before calling Toshiba, make sure you have:

❖Your computer’s serial number.

❖The computer and any optional devices related to the

problem.

❖Backup copies of your Windows operating system and all

other preloaded software on your choice of media.

❖Name and version of the program involved in the

problem along with its installation media.

197

If Something Goes Wrong

Other Toshiba Internet Web sites

❖Information about what you were doing when the

problem occurred.

❖Exact error messages and when they occurred.

For technical support, call the Toshiba Global Support

Centre:

Within the United States at (800) 457-7777

Outside the United States at (949) 859-4273

Other Toshiba Internet Web sites

Toshiba’s worldwide offices

toshiba.com Worldwide Toshiba corpo-

rate site

computers.toshiba.com Marketing and product

information in the USA

www.toshiba.ca Canada

www.toshiba-Europe.com Europe

www.toshiba.co.jp/index.htm Japan

http://servicio.toshiba.com Mexico and all of Latin

America

Australia

Toshiba (Australia) Pty. Limited

84-92 Talavera Road

North Ryde NSW 2113

Sydney

Australia

Canada

Toshiba Canada Ltd.

191 McNabb Street

Markham, Ontario

L3R - 8H2

Canada

France

Toshiba Systèmes (France) S.A.

7, Rue Ampère; B. P. 131

92800 Puteaux Cédex

France

Germany

Toshiba Europe GmbH

Leibnizstraße 2

D-93055 Regensburg

Germany

198

If Something Goes Wrong

Toshiba’s worldwide offices

For more information on additional Toshiba worldwide

locations, please visit: www.toshiba.co.jp/index.htm.

Italy

Centro Direzionale Colleoni

Palazzo Perseo

Via Paracelso 10

20041, Agrate Brianza

Milano, Italy

Japan

Toshiba Corporation, PCO-IO

1-1, Shibaura 1-Chome

Minato-Ku, Tokyo, 105-8001

Japan

Latin America and Caribbean

Toshiba America Information

Systems

9740 Irvine Blvd.

Irvine, California 92618

USA

800-457-7777 (within the US)

949-859-4273 (outside of the US -

this call may incur long-distance

charges)

Mexico

Toshiba de México S.A. de C.V.

Sierra Candela No.111, 6to. Piso

Col. Lomas de Chapultepec.

CP 11000 Mexico, DF.

Spain

Toshiba Information Systems

(España) S.A.

Parque Empresarial San Fernando

Edificio Europa, 1a Planta

Escalera A

28831 (Madrid) San Fernando de

Henares

Spain

United Kingdom

Toshiba Information Systems

(U.K) Ltd.

Toshiba Court

Weybridge Business Park

Addlestone Road

Weybridge, Surrey KT15 2UL

United Kingdom

United States

Toshiba America Information

Systems, Inc.

9740 Irvine Boulevard

Irvine, California 92618

United States

The Rest of Europe

Toshiba Europe (I.E.) GmbH

Hammfelddamm 8

D-4-1460 Neuss

Germany

199

Appendix A

Hot Keys

Hot keys are keys that, when pressed in combination with the

Fn key, turn system functions on and off. Hot keys have a

legend on or above the key indicating the option or feature the

key controls.

Volume Mute

Fn +

This hot key enables/disables volume mute on your

computer.

When volume mute is enabled, no sound will come

from the speakers or headphones.

200

Hot Keys

Instant password security

When the display re-appears, select your user name and enter

the correct password if you have created one.

Power usage profile

Fn + This hot key blanks the display.

Fn + This hot key displays the power usage pop-up window

and cycles through the profiles.

The power usage profiles are:

Full Power, High Power, Normal, DVD Playback,

Presentation, and Long Life.

Sample power usage modes

The properties of each mode are set in the Toshiba

Power Management utility. For more information, see

“Mobile Computing” on page 108.

201

Hot Keys

Stand By mode

Fn + This hot key places the computer into Stand By mode.

A message box is displayed by default to confirm that

the computer is going into Stand By mode. This

message box can be set so it does not display.

Sample Stand By confirmation box

For more information about Stand By mode, please see

“Using Standby Mode” on page 105.

202

Hot Keys

Hibernation mode

Fn + This hot key places the computer into Hibernation

mode.

If Hibernation mode is enabled (the default) a message

box is displayed by default to confirm the computer is

going into Hibernation mode. The message box can be

set so it does not display.

Sample Hibernation confirmation box

If Hibernation mode is disabled, this hot key will not

respond. For more information on Hibernation mode,

see “Enabling Hibernation” on page 160.

203

Hot Keys

Display modes

Fn + This hot key cycles through the power-on display

options.

The display modes are:

❖Built-in display panel only

❖Built-in display panel and external

monitor simultaneously

❖External monitor only

❖Built-in display panel and TV (or other

external video device) simultaneously

❖TV (or other external video device)

only

Sample display options window

To use a simultaneous mode, you must set the resolution

of the internal display panel to match the resolution of

the external display device.

204

Hot Keys

Display brightness

Disabling or enabling the TouchPad

Keyboard hot keys

Fn + This hot key decreases the screen brightness.

Fn +

This hot key increases the screen brightness.

Fn + This hot key enables/disables the TouchPad.

To use the TouchPad, see “Using the TouchPad™” on

page 54.

Sample disable and enable TouchPad windows

Fn + This hot key turns the cursor control overlay on and off.

Fn + This hot key turns the numeric overlay on and off.

Fn + This hot key turns the scroll lock feature on and off.

205

Appendix B

Power Cable

Connectors

The computer features a universal power supply you can use

worldwide. This appendix shows the shapes of the typical AC

power cable connectors for various parts of the world.

USA and Canada

UL approved

CSA approved

United Kingdom

BS approved

Australia

AS approved

Europe

VDA approved

NEMKO approved

206

Appendix C

Using ConfigFree™ with

your Toshiba Computer

ConfigFree™ is a set of utilities that makes it easy to control

communication devices and network connections.

ConfigFree also lets you identify communication problems

and create profiles for easy switching between locations and

communication networks.

The ConfigFree utilities include the following:

❖Connectivity Doctor—The Connectivity Doctor utility is

used to analyze network connections and fix networking

problems with your notebook computer. For more

information, see “Connectivity Doctor” on page 208.

❖Search for Wireless Devices—The Search for Wireless

Devices utility searches for wireless LAN and Bluetooth

devices used in the neighborhood, and displays

information about them on a virtual map. For more

information, see “Search for Wireless Devices” on

page 211.

❖Profile Settings—The Profiles utility lets you switch

between network configurations. For more information,

see “Profile Settings” on page 213.

207

Using ConfigFree™ with your Toshiba Computer

Getting Started

This section contains information about the ConfigFree main

screen, and how to start and setup ConfigFree.

For more detailed information on setting up and using

ConfigFree, see the Help File included in the application.

Starting ConfigFree

To start ConfigFree, be sure the computer has a wired or

wireless connection. Then perform any of the following

steps:

❖(Microsoft® Windows XP or 2000) Click the Start

button, and select All Programs, , TOSHIBA

Networking, ConfigFree.

❖Double-click the ConfigFree icon on the taskbar.

❖Press the Toshiba Console button (if applicable to your

system) to open the Toshiba Console, and then click the

ConfigFree icon.

❖Click the ConfigFree icon on the taskbar, and then

click the desired utility.

If your computer is not connected to a network, the ConfigFree

icon on the taskbar is displayed with an “X.”

When you start a search for wireless devices, ConfigFree

Launcher displays on your computer desktop. You can then

click the appropriate icon on the Launcher to start the desired

ConfigFree utilities.

NOTE

NOTENOTE

208

Using ConfigFree™ with your Toshiba Computer

ConfigFree Utilities

Sample ConfigFree Launcher

ConfigFree Utilities

Connectivity Doctor

The Connectivity Doctor lets you analyze your network

connections and fix network-connection problems. Using

Connectivity Doctor, you can view detailed network

information by simply moving the mouse pointer.

The Connectivity Doctor works with the following network

devices:

❖Wired and wireless network devices

❖Routers, hubs, and bridges

❖Access points

Wireless LAN

Bluetooth

Connectivity Doctor

Profiles

209

Using ConfigFree™ with your Toshiba Computer

ConfigFree Utilities

Sample Connectivity Doctor screen

Moving the mouse pointer over a wired or wireless network

device icon displays information about the device, such as its

IP address, subnet mask, and MAC address. A wireless

network device also shows information such as the network

SSID and the device’s Wired Equivalent Privacy (WEP) key

settings.

Sample viewing device information

210

Using ConfigFree™ with your Toshiba Computer

ConfigFree Utilities

If a problem, or potential problem, is detected, a triangle

containing an exclamation point appears in the Connectivity

Doctor screen and an orange frame describes the relevant

location. You can then view a possible cause and solution for

the problem by clicking the exclamation point.

For example, if the connection to a wireless network cannot

be established because the wireless communication switch is

turned off, an exclamation point appears next to the wireless

communication switch. Clicking the exclamation point

displays a description of the problem and a solution.

The following checkboxes and buttons are provided on the

Connectivity Doctor screen:

Stay on the task

tray

When checked, the ConfigFree icon resides in

the system tray.

Options Displays ConfigFree setting screen.

Log Lets you create a diagnostic log, view a history of

log files, or delete the history. Log files are saved

as CFhtmlxxxxx.htm, where xxxxx is the creation

date and time. They reside in the folder:

C;\Documents and Settings\username\Local

Settings\Temp

About Displays the version of Connectivity Doctor.

Help Displays online help.

Close Closes the Connectivity Doctor screen.

211

Using ConfigFree™ with your Toshiba Computer

ConfigFree Utilities

Search for Wireless Devices

The Search for Wireless Devices utility searches for wireless

LAN devices and Bluetooth devices currently used in the

neighborhood, and displays information about them on a

virtual map.

To search for wireless devices:

1Click the icon in the system tray.

2Click Search for Wireless Devices.

A virtual map appears with a graphical representation of the

wireless devices that have been detected.

Search for Wireless Devices can also be started from the

ConfigFree Launcher.

For Wi-Fi networks, the intensity of a signal is displayed in

five levels or “bands.” The signal from the connected access

point is displayed in the bands surrounding the PC icon at the

center of the map. Placing the pointer over the displayed

“point of light” shows detailed information about the wireless

device.

The wireless device shown near the center of the map is not

necessarily near your notebook computer. If a wireless device

located a distance away also has a strong signal, it appears

near the center of the map as well.

NOTE

NOTENOTE

NOTE

NOTENOTE

212

Using ConfigFree™ with your Toshiba Computer

ConfigFree Utilities

Sample viewing Wi-Fi devices

The following screen shows an example of Bluetooth devices

that are detected. As with the Wi-Fi screen, moving the

mouse pointer over a device icon displays information about

the device.

Sample viewing Bluetooth devices

You can connect to devices shown on the Bluetooth map:

1Click the icon of a Bluetooth device.

213

Using ConfigFree™ with your Toshiba Computer

ConfigFree Utilities

2Click your own computer at the center of the map.

3Configured devices are automatically connected. Devices

not yet configured launch the Add New Connection

Wizard, where you can configure and connect to the

device.

Profile Settings

The Profile Settings utility lets you save network settings in

“profiles.” ConfigFree profiles are useful for easily switching

network settings and devices.You can switch network settings

simply by selecting the profile with the desired settings.

If you visit a client company occasionally, for example, you

can set up a profile to match that environment and connect to

the network. Similarly, users who access networks in the

office and at home can set up profiles to handle these

networking environments.

A profile contains the currently configured network settings

on the computer, as well as information about any network

devices. The following settings can be saved (or “captured”)

in a profile:

❖Internet settings — includes LAN settings (proxy server

settings) and the address of a home page that opens

automatically when Internet Explorer starts.

❖Devices — lets you enable or disable settings of wired

and wireless network devices, infrared devices, and set

the power status of Bluetooth antennas.

❖TCP/IP settings — includes DHCP, IP address, subnet

mask, default gateway, DNS server, and WINS server

settings.

214

Using ConfigFree™ with your Toshiba Computer

ConfigFree Utilities

❖Personal firewall settings for Internet connections.

❖Dial-up connection settings for the default connection.

❖File and printer sharing settings.

❖Printer settings for the default printer.

To create a profile:

1Click the icon in the system tray.

2Move the pointer to Profile.

3Click Add. The Add Profile screen appears.

4Select Capture and click OK. The Add Profile screen

appears.

5Enter the name of the profile you want to create.

6Enter any optional comments, if desired.

7Click Change Icon and select an icon for this profile.

8Under Captured Items, select the items you want to

capture for this profile.

9If connecting with a wireless network, select the desired

Auto Switch Settings. (These options are unavailable if

wireless devices have been disabled.)

10 Under Execute this program after switching, click the

Browse button and select the program, file, or Web site

URL that is to start after switching to this profile.

For example to have Internet Explorer start in Windows XP

after switching profiles, type:

C:\Program Files\Internet Explorer\IEXPLORE.EXE

11 Click OK.

215

Using ConfigFree™ with your Toshiba Computer

ConfigFree Utilities

Sample Add Profile screen

The online help provides real-world examples of setting up

profiles for different networking environments.

After you set up one or more profiles, you can check their

settings and fine-tune them as necessary. Profiles can also be

imported and exported. This feature is useful when

transferring profile settings to other computers. For more

information about modifying, importing, and exporting

profiles, refer to the online help.

Quick Connect

The Quick Connect feature switches the Wireless LAN

connection to connect to a Toshiba Wireless Projector. Once

the projector utility is installed, launching the Quick Connect

utility automatically opens the Wireless Data Projector

Application. There you can configure how you would like to

use the projector.

NOTE

NOTENOTE

216

Using ConfigFree™ with your Toshiba Computer

ConfigFree Utilities

To connect to a Toshiba Wireless Projector:

1Click the icon in the system tray.

2Move the mouse pointer to Toshiba Wireless Projector

(DPJ), then click Connect.

Launching Quick Connect prevents you from using the

network to connect to a Toshiba Wireless Projector when the

wireless LAN Configuration is set to Ad hoc. If you are

connected to an access point, the connection is broken and re-

established later.

To review the current Toshiba Wireless Projector settings and

change them if necessary:

1Click the icon in the system tray.

2Move the mouse pointer to Toshiba Wireless Projector

(DPJ), then click Settings. The Quick Connect

properties dialog box appears.

3Complete the settings. Refer to the online help if

necessary.

4Click OK.

The default connection setting is for Ad hoc mode, therefore, if

the setting on the Toshiba Wireless Projector is in

Infrastructure mode, it will not connect, however; you can

change the settings to Infrastructure mode to match the

settings on the projector.

NOTE

NOTENOTE

217

Using ConfigFree™ with your Toshiba Computer

ConfigFree Utilities

Sample Projector icon when connected with Quick Connect

If the wireless mode for the wireless setting is set for 5 GHz

(802.11a), Quick Connect changes this mode to 2.4 GHz

(802.11b) and then connects to the projector.

The wireless LAN configuration returns to the settings that

were last used before the Quick Connect function was started:

❖If the Toshiba Wireless Projector utility is closed.

❖If you select Toshiba Wireless Projector (DPJ) from the

ConfigFree tray menu (this disconnects the wireless LAN

connection).

❖If you select a profile from the ConfigFree tray menu or

when you disable a wireless device.

❖If you close ConfigFree.

218

Using ConfigFree™ with your Toshiba Computer

Using the Automatic Switch

The Automatic Switch feature allows the computer to

automatically switch profiles the next time it is powered on.

This feature is particularly useful if you want your computer

to automatically switch from the network configuration you

use in your office to the one you use at home.

The Auto Switch feature contains options for automatically

switching between wired and wireless devices. With these

options, the computer automatically switches to a wireless

LAN network when the cable of the wired LAN network is

removed from the computer. When the cable is reconnected,

the connection to the wired LAN is re-established.

To use the Automatic Switch feature:

1Right-click the icon in the system tray.

2Click Auto Switch. The Auto Switch dialog box appears.

3Check Enable Wireless when cable disconnect occurs.

4Click OK.

If your computer is connected to multiple wireless LAN

devices, the Auto Switch (SSID) feature is disabled. To enable

this feature, only one wireless LAN device can be used.

NOTE

NOTENOTE

219

Using ConfigFree™ with your Toshiba Computer

Semi-Automatic Switch Feature

The Semi-Automatic feature alerts you when the computer

connects to a Service Set Identifier (SSID) stored in a profile,

When the computer connects to the designated SSID, a

notification window appears. You can then click this window

to connect using the settings specified in the profile.

To use the Semi-Automatic Switch feature:

1Right-click the icon in the system tray.

2Click Auto Switch. The Auto Switch dialog box appears.

3Select the Auto Switch (SSID) tab.

4Select the profile to be automatically selected when the

SSID is detected, then click Add. The profile is moved to

the List of target SSIDs and profiles.

5Repeat the previous step for each additional profile you

want to select.

6Select Automatically switch profiles when connected

to this SSID.

7Check Automatically switch profile when connected to

this SSID.

8Click OK.

The computer is now configured to use the Semi-Automatic

Switch feature. When the computer connects to an SSID in a

profile, a display notification window appears. You can then

click Switch on the window to switch profiles. You can also

set the option for having the switch be automatic without the

need for a notification.

Several profiles can be defined for a single SSID. In this case,

several notification windows are displayed. By clicking these

windows, you can switch to the profile for that location.

NOTE

NOTENOTE

220

Glossary

TECHNICAL NOTE: Some features defined in this glossary

may not be available on your computer.

Acronyms

These acronyms may appear in this user’s guide.

AC alternating current

BIOS basic input/output system

bps bits per second

CD compact disc

CD-ROM compact disc read-only memory

CD-RW compact disc rewrite memory

CMOS complementary metal-oxide semiconductor

COM1 communications port 1 (serial port)

COM2 communications port 2 (serial port)

CPU central processing unit

221

Glossary

DC direct current

DMA direct memory access

DIMM dual inline memory module

DOS disk operating system

DPI dots per inch

DSTN dual supertwist nematic

DVD digital versatile (or video) disc

DVD-ROM digital versatile (or video) disc read-only memory

ECP enhanced capabilities port

EPROM erasable programmable read-only memory

FAT file allocation table

FCC Federal Communications Commission

FIR fast infrared

GB gigabyte

HDD hard disk drive

HTML Hypertext Markup Language

IEEE Institute of Electrical and Electronics Engineers

I/O input/output

IRQ interrupt request

ISP Internet service provider

KB kilobyte

LAN local area network

LCD liquid crystal display

LPT1 line printer port 1 (parallel port)

LSI large-scale integration

MB megabyte

MIDI Musical Instrument Digital Interface

PC personal computer

PCI Peripheral Component Interconnect

222

Glossary

PCMCIA Personal Computer Memory Card International

Association

RAM random access memory

RFI radio frequency interference

ROM read-only memory

RTC real-time clock

SCSI small computer system interface

DDRAM double data random access memory

SRAM static random access memory

SVGA super video graphics adapter

TFT thin film transistor

USB universal serial bus

URL uniform resource locator

WAN wide area network

www World Wide Web

Terms

These terms may appear in this user’s guide.

Aactive-matrix display — A liquid crystal display (LCD) made from an

array of liquid crystal cells using active-matrix technology. Also

known as a “TFT display,” in its simplest form there is one thin film

transistor (TFT) for each cell. This type of display works well with

notebook computers because of its shallow depth and high-quality

color. Active-matrix displays are viewable from wider angles than

most passive-matrix displays.

adapter — A device that provides a compatible connection between two

units. For example, the computer’s internal display adapter receives

information from the software and translates it into images on the

screen. An adapter can take a number of forms, from a

microprocessor to a simple connector. An intelligent adapter (one

that is capable of doing some processing) may also be called a

controller.

223

Glossary

alternating current (AC) — The type of power usually supplied to

residential and commercial wall outlets. AC reverses its direction at

regular intervals. Compare direct current (DC).

application — A computer program that you use to perform tasks of a

specific type. Applications include word processors, spreadsheets,

and database management systems. See also program.

Bbackup — A copy of a file, usually on a removable disk, kept in case the

original file is lost or damaged.

basic input/output system (BIOS) — See BIOS.

baud rate — The speed at which a communication device, such as a

printer or modem, transmits information. Baud rate is the number of

signal changes per second (not necessarily the same as bits per

second). See also bits per second.

BIOS (basic input/output system) — Basic instructions, stored in read-

only memory (ROM), containing the information the computer

needs in order to check hardware and load the operating system

when you start up the computer.

bit: — Short for “binary digit.” A bit is the smallest unit of information

used by a computer. A group of eight bits is a byte. See also byte.

bits per second (bps) — A way of measuring the speed at which

information is passed between two devices. The basic measure used

in modem communications, bps is similar, but not identical, to the

baud rate. See also baud rate.

boot — To start the computer. The term “boot” originates from bootstrap

program (as in “pulling itself up by its bootstraps”), a program that

loads and initializes the operating system. See also reboot.

boot disk — See system disk.

boot priority (startup sequence) — The order in which the computer

accesses its disk drives to locate the startup files. Under the default

startup sequence, the computer looks for the startup files in the

diskette drive before checking the hard disk.

224

Glossary

bus — An electrical circuit that connects the central processing unit

(CPU) with other parts of the computer, such as the video adapter,

disk drives, and ports. It is the pathway through which data flows

from one device to another. See also bus speed, frontside bus.

bus speed — The speed at which the central processing unit (CPU)

communicates with the other parts of the computer.

byte — A sequence of eight bits. A byte is the smallest addressable unit

of data. See also bit, gigabyte, kilobyte, megabyte.

Ccache — A section of very fast memory in which frequently used

information is duplicated for quick access. Accessing data from

cache is faster than accessing it from the computer’s main memory.

Produktspecifikationer

Varumärke:	Toshiba
Kategori:	Laptop
Modell:	Satellite A55
Färg på produkten:	Zwart
Vikt:	1350 g
Bredd:	136 mm
Djup:	197 mm
Höjd:	141 mm
Snäll:	Mobiele printer
LED-indikatorer:	Ja
Nuvarande:	2 A
USB uttag:	Ja
Anslutningsteknik:	Bedraad
Ethernet LAN:	Ja
Typ av strömkälla:	AC
Antal USB 2.0-portar:	1
Antal Ethernet LAN (RJ-45)-portar:	1
Typ av mat:	DC
Förvaringstemperatur:	-10 - 60 °C
Förvaringsfuktighet:	10 - 90 procent
Flashminne:	0.256 MB
Maximal-upplösning:	203 x 203 DPI
Maximal rulldiameter:	83 mm
Medeltid mellan fel (MTBF):	360000 uur
Utskriftsteknik:	Direct thermisch
Seriell port(ar):	1
Buffertstorlek:	128 KB
Inbyggda streckkoder:	CODABAR (NW-7), Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, ITF, PDF417, QR Code, UPC-A, UPC-E
Maximal utskriftsbredd:	76 mm
Utskriftshastighet (metrisk):	300 mm/sec
Wifi:	Nee
AC-ingångsspänning:	100 - 240 V
AC-ingångsfrekvens:	50 - 60 Hz
Drifttemperatur (TT):	0 - 45 °C
Relativ luftfuktighet i drift (VV):	10 - 80 procent
Pappersbredd som stöds:	64 - 76 mm
Fräs:	Ja
Teckenstorlek:	24 x 24 mm
Print snelheid:	576 lps
Ribbon liv:	2 miljoen tekens