TP Link Omada DS110GMP Bruksanvisning

TP Link Inte kategoriserad Omada DS110GMP

Läs nedan 📖 manual på svenska för TP Link Omada DS110GMP (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/2
Installation Guide
Unmanaged Desktop PoE+ Switch
© 2023 TP-Link 7106510543 REV1.0.0
Switches Explanation
O: Ports run at 10/100/1000 Mbps and support PoE power supply up to 100 m away.
On: Ports run at 10 Mbps and support PoE power supply up to 250 m away.
Extend (for DS108GPL/DS110GMP)
Connection
Note: For simplicity, we will take DS108GPL for example throughout the Guide.
PC
IP Camera AP
Ethernet Ports (1-8)
PoE Ports (1-4)
IP Phone
PoE Devices
Router
LAN PortWAN Port
Internet
DC P er Adapterow
AC Power Cord
Note:
PoE ports can also connect to non-PoE devices, but only transmit data.
DS110GMP has two uplink ports, which typically connect to uplink devices like routers.
The combo port of DS110GMP consists of one RJ45 port and one SFP slot, which cannot be used
simultaneously.
The SFP slot of DS110GMP needs to work with a gigabit SFP module.
O: The PoE Auto Recovery function is disabled.
On: The switch will constantly detect the working status of a PoE powered device (PD).
When the switch nds that the PD works abnormally, the switch will reboot it.
Recovery (for DS108GPL/DS110GMP)
Note: The numbers in brackets indicate the ports where the feature takes eect. For example, when Extend(1-4) is toggled to On, the Extend mode will be enabled for ports 1-4.
O: Ports can transmit data with each other.
On: Specic ports cannot transmit data with other downlink ports. They can transmit data
only with the uplink ports.
Isolation (for DS110GMP)
O: All the ports transmit data with the same priority.
On: The specic ports transmit data with a higher priority than other ports.
Priority (for DS110GMP)
For DS110GMP:
On: 116 W≤Total power supply < 123 W
Flashing: Total power supply ≥ 123 W
O: Total power supply < 116 W
1.
2.
3.
4.
LED Explanation
Power PoE Status
On: Providing PoE power
Flashing: PoE fault
O: Not providing PoE power
On: Power on
O: Power o
Link/Act; Uplink 1, Uplink 2
Green On:
Running at 1000 Mbps, but no activity.
Green Flashing:
Running at 1000 Mbps and is transmitting or
receiving data.
Yellow On:
Running at 10/100 Mbps, but no activity.
O:
No device is linked to the corresponding port.
Yellow Flashing:
Running at 10/100 Mbps and is transmitting
or receiving data.
PoE Max
For DS108GPL:
On: 57 W≤Total power supply < 64 W
Flashing: Total power supply ≥ 64 W
O: Total power supply < 57 W
Frequently Asked Questions (FAQ)
The Power LED should be lit when the power system is working normally. If the Power LED is
not lit, please check as follows:
A1:
Make sure the AC power cord is connected the switch with power source properly.
A2:
Make sure the voltage of the power supply meets the requirements of the input voltage
of the switch.
A3:
Make sure the power source is on.
Q1. The Power LED is not lit.
It is recommended that you check the following items:
A1:
Make sure that the cable connectors are rmly plugged into the switch and the device.
A2:
Make sure the connected device is turned on and working well.
A3:
The cable must be less than 100 meters long (328 feet). If Extend Mode is enabled, it
should be less than 250 meters (820 feet).
Q2. Why is the Link/Act LED not lit while a device is connected to
the corresponding port?
For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR code.
To ask questions, find answers, and communicate with TP-Link users or
engineers, please visit https://community.tp-link.com to join TP-Link
Community.
Safety Information
Keep the device away from water, re, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please
contact us.
Place the device with its bottom surface downward.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Adapter shall be installed near the equipment and shall be easily accessible.
TP-Link hereby declares that the device is in compliance with the essential requirements
and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and
(EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tp-link.com/en/support/ce/
EU declaration of conformity
Specications
Q3. Why is PoE/PoE+ Port not supplying power for PoE devices?
When the total power consumption of connected PoE devices exceeds the maximum, the
PoE port with a smaller port number has a higher priority. The system will cut o power to
the ports with larger port numbers to ensure supplying to other ports.
Take DS108GPL as an example. If port 1, 2 and 4 are consuming 15.4 W respectively, and
an additional PoE device with 20 W is connected to port 3, the system will cut o the power
of port 4 to compensate for the overload.
IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x,
IEEE 802.3af, IEEE 802.3at, IEEE 802.1p
IEEE 802.3z (For DS110GMP only)
For DS108GPL:
8 10/100/1000 Mbps RJ45 Ports, Auto-Negotiation MDI/MDIX;
PoE Ports: Port 1-4
For DS110GMP:
10 10/100/1000 Mbps RJ45 Ports, Auto-Negotiation MDI/MDIX;
1 1000 Mbps SFP port (Combo);
PoE Ports: Port 1-8
10BASE-T: UTP category 3, 4, 5 cable (maximum 100 m);
EIA/TIA-568 100 Ω STP (maximum 100 m)
100BASE-TX: UTP
category
5, 5e
cable (maximum
100
m);
EIA/TIA-568 100 Ω STP (maximum 100 m)
1000BASE-T: UTP
category 5e cable or above (maximum 100 m);
EIA/TIA-568 100 Ω STP (maximum 100 m)
1000BASE-SX/LX/LX10/BX10: MMF, SMF
(For DS110GMP only)
DS108GPL: 16 Gbps
DS110GMP: 20 Gbps
Store-and-Forward
Automatically learning, automatically aging
Input: 100-240 VAC, 50/60 Hz
Output: 53.5 V DC/2.43 A (For DS110GMP)
53.5 V DC/1.31 A (For DS108GPL)
DS108GPL: 64 W (up to 30 W for each PoE port)
DS110GMP: 123 W (up to 30 W for each PoE port)
Yes
DS108GPL: 105 mm
DS110GMP: 150 mm
General Specications
A1:
Before upgrading a connected PoE powered device (PD), disable PoE Auto Recovery to
avoid the PD’s damage.
A2:
When a PD does not send data packets to the switch for a long period in certain
scenarios (e.g. an IPC in sleep mode), disable PoE Auto Recovery to avoid the PD
repeatedly rebooting.
Q4. What should I notice before using the PoE Auto Recovery
feature?
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
0 C to 40 C (32 F to 104˚ ˚ ˚ ˚F)
-40 C to 70 C (-40 F to 158˚ ˚ ˚ ˚F)
10% to 90%RH non-condensing
5% to 90%RH non-condensing
Environmental and Physical Specications
UK declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements
and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and
Electrical Equipment (Safety) Regulations 2016.
The original UK declaration of conformity may be found at
https://www.tp-link.com/support/ukca
The plug on the power supply cord is used as the disconnect device, the
socket-outlet shall be easily accessible.
Switching Capacity
Network Media (Cable)
Interface
Power Supply
PoE Budget
Transfer Method
Distance Between
Mounting Holes
Wall Mountable
Standard
MAC Address Learning

Produktspecifikationer

Varumärke: TP Link
Kategori: Inte kategoriserad
Modell: Omada DS110GMP

Behöver du hjälp?

Om du behöver hjälp med TP Link Omada DS110GMP ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad TP Link Manualer

TP Link

TP Link DS-P7001-04 Bruksanvisning

26 Oktober 2024
TP Link

TP Link MS100 Bruksanvisning

2 Oktober 2024
TP Link

TP Link Deco BE25 Bruksanvisning

24 September 2024
TP Link

TP Link Omada ES205GP Bruksanvisning

24 September 2024
TP Link

TP Link Archer TXE50UH Bruksanvisning

23 September 2024
TP Link

TP Link EP40M Bruksanvisning

23 September 2024
TP Link

TP Link Deco BE75 Bruksanvisning

23 September 2024
TP Link

TP Link LiteWave LS109P Bruksanvisning

23 September 2024
TP Link

TP Link Omada EAP625-Outdoor HD Bruksanvisning

23 September 2024
TP Link

TP Link Omada DS1024G Bruksanvisning

23 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024