TP Link Omada DS116GE Bruksanvisning

TP Link Inte kategoriserad Omada DS116GE

Läs nedan 📖 manual på svenska för TP Link Omada DS116GE (3 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/3
Installation Guide
© 2023 TP-Link 7106510714 REV1.0.0
1000 Mbps (Green)
On: Running at 1000 Mbps
Flashing: Transmitting/receiving data
10/100 Mbps (Yellow)
On: Running at 10/100 Mbps
Flashing: Transmitting/receiving data
LED Explanation
Power
On: Power on
O฀: Power o฀
Link/Act
Note: Images may di฀er from your actual product. For simplicity, we will take DS108GE for example throughout this Guide.
Connection
Ethernet Ports (1-8)
DS108GE
PC PC
Router
LAN PortWAN Port
Internet
5/8/16-Port Gigabit Easy Smart Switch
Con฀guration
The switch is plug and play. To con฀gure the switch, you can use the
Web-based GUI or the con฀guration utility.
The utility is only supported on Windows now.
Using the Con฀guration Utility
1. Go to https://www.tp-link.com/support and search the model number of
your switch. Download the from the
Easy Smart Con฀guration Utility
product Support web page on your PC.
Using the Web-based GUI
Note: If the switch gets a new IP address from the DHCP server, your
connection to the switch will be lost. Enter the new IP address in your
browser to access the switch again.
1. Find out the IP address of the switch.
By default, the switch receives an IP addess from a DHCP server (or a
router that functions as a DHCP server) in your network. You can ฀nd
out this IP address on the DHCP server.
If the switch cannot receive an IP address from a DHCP server, it uses
the static IP address of , with a subnet mask of 192.168.0.1
255.255.255.0.
2. Con฀gure IP address on your PC to make sure the switch and PC are in
the same subnet.
If the switch uses an IP address assigned by a DHCP server, set your PC
to obtain an IP address automatically from the DHCP server.
If the switch uses as the IP address, con฀gure your PC’s IP
192.168.0.1
address as 192.168.0.x (”x” ranges from 2 to 254), and subnet mask as
255.255.255.0.
Launch a web browser on your PC, enter the IP address of the switch in
the address bar and press . Log in with as both user name
Enter admin
and password.
3.
Now you can con฀gure the switch using the Web-based GUI. For further
information, refer to the .
User Guide
Go to https://www.tp-link.com/support, search the model number of your
switch, and you can ฀nd this guide on the product web page.
Support Now you can con฀gure the switch using the con฀guration utility. For further
information, refer to the .Easy Smart Con฀guration Utility User Guide
Go to https://www.tp-link.com/support, search the model number of your
switch, and you can ฀nd this guide on the product web page.
Support
Double click the icon on the desktop, and the
utility Home page will display a list of TP-Link
switches on the local network.
3.
2. Decompress the downloaded ฀le, run the
installation wizard and follow the prompts to
install the .
Easy Smart Con฀guration Utility
DS108GE 1.0
4.
If the switch uses an IP address assigned by
a DHCP server, set your PC to obtain an IP
address automatically from the DHCP
server.
If the switch uses as the IP 192.168.0.1
address, con฀gure your PC’s IP address as
192.168.0.x (”x” ranges from 2 to 254), and
subnet mask as 255.255.255.0.
Click to ฀nd out IP parameters of the switch.
Double click the switch that you want to con฀gure. Log in with admin as
both user name and password.
5.
Frequently Asked Questions (FAQ)
Q1. Why is the Power LED not lit?
By default, the Power LED should be lit when the power system is working
normally. If the Power LED is not lit, please check the following:
A1: Make sure the power adapter is connected to the switch with power
source properly.
A2: Make sure the voltage of the power supply meets the requirements of
the input voltage of the switch.
A3: Make sure the power source is ON.
A4: On the LED On/O฀ con฀guration page, check whether the LED status is
on. By default, the LED status is on.
Some models featured in this guide may be unavailable in your country or region.
For local sales information, visit https://www.tp-link.com.
Q2. Why is the Link/Act LED not lit while a device is
connected to the corresponding port?
Please check the following:
A1: Make sure that the cable connectors are ฀rmly plugged into the switch
and the device.
A2: Make sure the connected device is turned on and works normally.
A3: The cable must be less than 100 meters long (328 feet).
A4: On the LED On/O฀ con฀guration page, check whether the LED status is
on. By default, the LED status is on.
Environmental and Physical Speci฀cations
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
0 ˚C to 40 ˚C (32 ˚F to 104 ˚F)
-40 ˚ ˚C (-40 ˚C to 70 F to 158 ˚F)
10% RH to 90% RH non-condensing
5% RH to 90% RH non-condensing
Speci฀cations
General Speci฀cations
Standard
Protocol
Inter acef
LED indicators
Transfer Method
IEEE802.3i, IEEE802.3u, IEEE802.3ab,
IEEE802.3x, IEEE802.1p, IEEE802.1q
CSMA/CD
Ethernet:
10 Mbps (Half Duplex), 20 Mbps (Full Duplex)
Fast Ethernet:
100 Mbps (Half Duplex), 200 Mbps (Full Duplex)
Gigabit Ethernet:
1000 Mbps (Half Duplex), 2000 Mbps (Full Duplex)
10Base-T:
UTP category 3, 4, 5 cable (maximum 100 m)
EIA/TIA-568 100 Ω STP (maximum 100 m)
100Base-TX:
UTP category 5, 5e cable (maximum 100 m)
EIA/TIA-568 100 Ω STP (maximum 100 m)
1000Base-T:
UTP category 5e cable (maximum 100 m)
EIA/TIA-568 100 Ω STP (maximum 100 m)
5/8/16 10/100/1000 Mbps Auto-Negotiation RJ45
Ports
Power, 10/100 Mbps LED, 1000 Mbps LED
Store-and-Forward
Automatically learning, automatically aging
10Base-T: 14881 pps/Port
100Base-TX: 148810 pps/Port
1000Base-T: 1488095 pps/Port
Yes
DS105GE: 52 mm
DS108GE: 110 mm
DS116GE: 200 mm
MAC Address Learning
Frame Forward Rate
Data Trans er Ratef
Network Media Cable( )
Wall Mountable
Distance Between
Mounting Holes
Safety Information
Do not use any other chargers than those recommended.
Keep the device away from water, ฀re, humidity or hot environments.
Adapter shall be installed near the equipment and shall be easily accessible.
Do not use damaged charger or USB cable to charge the device.
Do not attempt to disassemble, repair, or modify the device. If you need service,
please contact us.
For technical support and other information, please visit
https://www.tp-link.com/support, or simply scan the QR
code.
To ask questions, find answers, and communicate with TP-Link users or
engineers, please visit https://community.tp-link.com to join TP-Link
Community.
EU declaration of conformity (For DS116GE)
TP-Link hereby declares that the device is in compliance with the essential requirements
and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and
(EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tp-link.com/en/support/ce/
UK declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements
and other relevant provisions of the Electromagnetic Compatibility Regulations 2016
and Electrical Equipment (Safety) Regulations 2016.
The original UK declaration of conformity may be found at
https://www.tp-link.com/support/ukca/
EU declaration of conformity (For DS105GE and DS108GE)
TP-Link hereby declares that the device is in compliance with the essential requirements
and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC,
2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tp-link.com/en/support/ce/
Place the device with its bottom surface downward.
Please read and follow the above safety information when operating the device.
We cannot guarantee that no accidents or damage will occur due to improper use
of the device. Please use this product with care and operate at your own risk.

Produktspecifikationer

Varumärke: TP Link
Kategori: Inte kategoriserad
Modell: Omada DS116GE

Behöver du hjälp?

Om du behöver hjälp med TP Link Omada DS116GE ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad TP Link Manualer

TP Link

TP Link DS-P7001-04 Bruksanvisning

26 Oktober 2024
TP Link

TP Link MS100 Bruksanvisning

2 Oktober 2024
TP Link

TP Link Deco BE25 Bruksanvisning

24 September 2024
TP Link

TP Link Omada ES205GP Bruksanvisning

24 September 2024
TP Link

TP Link Archer TXE50UH Bruksanvisning

23 September 2024
TP Link

TP Link EP40M Bruksanvisning

23 September 2024
TP Link

TP Link Deco BE75 Bruksanvisning

23 September 2024
TP Link

TP Link LiteWave LS109P Bruksanvisning

23 September 2024
TP Link

TP Link Omada EAP625-Outdoor HD Bruksanvisning

23 September 2024
TP Link

TP Link Omada DS1024G Bruksanvisning

23 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024