Tripp Lite B110-SP-HDMI Bruksanvisning

Läs nedan 📖 manual på svenska för Tripp Lite B110-SP-HDMI (16 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 13 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/16
1
Quick Start Guide
Digital Signage
In-Line HDMI
Surge Protector
Model: B110-SP-HDMI
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
Español 5 • Français 9 • Русский 13
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
surge protector in our monthly drawing!
www.tripplite.com/warranty
19-03-095-93384E.indb 1 6/10/2019 10:12:45 AM
2
Package Contents
Installation
Product Features
B110-SP-HDMI In-Line Surge Protector
Grounding Wire, 12 in.
Mounting Screws (x2)
Screw Anchors (x2)
Grounding Wire Screw
Quick Start Guide
Protects an HDMI input and output
against Electrostatic Discharge (ESD),
lightning surges and cable discharge
events
Meets IEC regulations:
o IEC 61000-4-2 (ESD) +/- 15kV(air),
+/- 8kV(contact)
o IEC 61000-4-4 (EFT) 40A (5/50ns)
o IEC 61000-4-5 (Lightning) 5A
(8/20µs)
Lightning protection reaction speed:
< 1ns
Solid-state silicon-avalanche technology
Low TMDS loss
Supports UHD resolutions up to 4K x 2K
@ 30 Hz
HDMI 1.4 and HDCP-compliant
Easy in-line installation with integrated
mounting ears
Passive by design – no external power
required
Note: The following instructions assume that two HDMI devices are currently connected together.
Single Device Protection:
1. Disconnect the installed HDMI cable from the device you wish to protect and attach
this cable to the “Cable End” of the In-Line HDMI Surge Protector.
2. With a user-supplied HDMI cable, connect the device to be protected to the
“Equipment End’ of the In-Line HDMI Surge Protector.
Note: For maximum protection, the HDMI cable between the “Equipment End” of the In-Line
HDMI Surge Protector and the HDMI equipment to be protected should not exceed 3 ft.
(0.9 m). Tripp Lite P568-003-Series High-Speed HDMI cables are recommended.
3. Connect the ground wire to either end of the In-Line HDMI Surge Protector and then
to earth ground.
In-Line HDMI
Surge Protector
HDMI Monitor
(Protected)
HDMI Player
(Not Protected)
Equipment
End Cable
End
19-03-095-93384E.indb 2 6/10/2019 10:12:45 AM
3
Package Contents
Specifications
Multiple Device Protection:
1. Disconnect the installed HDMI cable from both devices you wish to protect.
2. Connect the In-Line HDMI Surge Protector to each end of the previously uninstalled
HDMI cable, ensuring both ends of the HDMI cable are connected to the “Cable End
of the In-Line HDMI Surge Protector.
3. With user-supplied HDMI cables, connect the “Equipment End” of each In-Line HDMI
Surge Protector to the HDMI devices you wish to protect.
Note: For maximum protection, the HDMI cable between the “Equipment End” of the In-Line
HDMI Surge Protector and the HDMI equipment to be protected should not exceed 3 ft.
(0.9 m). Tripp Lite P568-003-Series High-Speed HDMI cables are recommended.
4. Connect the ground wire to either end of each In-Line HDMI Surge Protector and then
to earth ground.
In-Line HDMI
Surge Protector
In-Line HDMI
Surge Protector
HDMI Monitor
(Protected) HDMI Player
(Protected)
Equipment
End
Equipment
End
Cable End
Input / Output Connectors HDMI Type-A (Female)
ESD Protection 15kV (ESD), 8kV (Contact)
EFT Protection 40A (5/50ns)
Lightning Protection 5A
Lightning Protection Reaction Speed <1ns
Operating Temp 32°F to 131°F (0°C to 55°C)
Maximum Video Resolution 4K x 2K @ 30 Hz
HDMI 1.4
HDCP Pass through (up to 2.2)
Dimensions 1 x 1 x 2.3 in. (25.4 x 25.4 x 58.3 mm)
Weight 0.08 lb. (35g)
19-03-095-93384E.indb 3 6/10/2019 10:12:45 AM
(8/20µs)

Produktspecifikationer

Varumärke: Tripp Lite
Kategori: Inte kategoriserad
Modell: B110-SP-HDMI

Behöver du hjälp?

Om du behöver hjälp med Tripp Lite B110-SP-HDMI ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Tripp Lite Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer