Tripp Lite PDUMNH16HVAT Bruksanvisning
Tripp Lite
Elskena
PDUMNH16HVAT
Läs nedan 📖 manual på svenska för Tripp Lite PDUMNH16HVAT (72 sidor) i kategorin Elskena. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/72
1. Important Safety 2
Instructions
2. Installation 3
2.1 Mounting the ATS 3
2.2 Connecting the ATS 5
2.3 Networking the ATS 6
3. Features 6
4. Digital Display 8
5. Using the Digital Display 10
5.1 Navigating Display Menus 10
and Submenus
5.2 Navigating Config Menus 13
and Submenus
6 15. Configuration and Operation
6.1 Automatic Transfer Switch 15
7. Service 17
8. Warranty and Product 18
Registration
Español 19
Français 37
Póññêèé 55
1
Owner’s Manual
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2015 Tripp Lite. All rights reserved.
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an
ISOBAR6ULTRA surge protector—
a $100 value!
www.tripplite.com/warranty
PDUMNH16HVAT
(Series Number: AG-0135)
PDUMNH30HVAT
(Series Number: AG-012F)
PDUMNH20HVAT
(Series Number: AG-0134)
PDUMNH32HVAT
(Series Number: AG-012F)
15-09-215-93338F.indb 1 9/30/2015 4:56:23 PM
2
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be
followed during the installation, operation, and storage of this product.
Failure to heed these instructions and warnings may affect the
product warranty.
• The ATS provides a convenient dongle outlet, but it DOES NOT provide surge or line noise
protection for connected equipment.
• The ATS is designed for indoor use only, in a controlled environment, away from excess moisture,
temperature extremes, conductive contaminants, dust or direct sunlight.
• The ATS can only be used in a Restricted Access Location where access can only be gained by
qualified service personnel.
• Keep indoor ambient temperature between 32°F and 122°F (0°C and 50°C).
• The ATS must be installed by a qualified technician only.
• Do not attempt to mount the ATS to an insecure or unstable surface.
• Install in accordance with National Electrical Code standards. Be sure to use the proper
overcurrent protection for the installation, in accordance with the plug/equipment rating.
• Connect the ATS to an outlet that is in accordance with your local building codes and that is
adequately protected against excess currents, short circuits and earth faults.
• Do not power on and use the ATS with one plug exposed.
• The electrical outlets supplying power to the equipment should be installed near the equipment
and easily accessible.
• Do not connect the ATS to an ungrounded outlet or to extension cords or adapters that eliminate
the connection to ground.
• Be sure to provide a local disconnect device on any models that are permanently installed
without a plug that is easily accessible.
• Disconnect both AC input sources before servicing ATS unit.
• Never attempt to install electrical equipment during a thunderstorm.
• Individual equipment connected to the ATS should not draw more current than the individual
outlet’s rating.
• The total load connected to the ATS must not exceed the maximum load rating for the ATS.
• Do not attempt to modify the ATS, input plugs or power cables.
• Do not drill into or attempt to open any part of the ATS housing. There are no user-serviceable
parts inside.
• Do not attempt to use the ATS if any part of it becomes damaged.
• Use of this equipment in life support applications where failure of this equipment can reasonably
be expected to cause the failure of the life support equipment or to significantly affect its safety
or effectiveness is not recommended. Do not use this equipment in the presence of a
flammable anesthetic mixture with air, oxygen or nitrous oxide.
1. Important Safety Instructions
15-09-215-93338F.indb 2 9/30/2015 4:56:23 PM
3
2.1 Mounting the ATS
The ATS supports 1U rack configurations.
Notes:
• The instructions described in this guide are for common rack and rack enclosure types and may not be
appropriate for all applications. The user must determine the fitness of hardware and procedures before
mounting. If hardware and procedures are not suitable for your application, contact the manufacturer of your
rack or rack enclosure for a solution.
• The user must determine the fitness of hardware and procedures before mounting. The PDU and included
hardware are designed for common rack and rack enclosure types and may not be appropriate for all
applications. Exact mounting configurations may vary.
• Rackmount equipment may be extremely heavy—be careful when moving or lifting equipment. Use one or more
assistants if necessary.
2. Installation
2.1.1 1U Rack Mounting
Attach the PDU to the rack by inserting four
user-supplied screws A through the PDU
mounting brackets B and into the mounting
holes of the rack rail as shown.
2.1.2 Rear Rack Rail Kit Installation
For additional stability, a front and rear rail kit can be used for rack mount installations. This kit is
included for models PDUMNH30HVAT and PDUNH32HVAT, but can also be purchased separately
for models where it is not included.
Disassemble the Bracket Sets
Note: This rail kit is only compatible with a 4-post rack or rack enclosure.
A
B
A Disassemble each bracket set by sliding
them apart.
Attach Rear Rail Segments to the Rack
B Insert two cage nuts (provided with your
rack enclosure) on each of the rear vertical
mounting rails of the rack enclosure at
your desired location.
A
A
B
15-09-215-93338F.indb 3 9/30/2015 4:56:24 PM
Produktspecifikationer
| Varumärke: | Tripp Lite |
| Kategori: | Elskena |
| Modell: | PDUMNH16HVAT |
Behöver du hjälp?
Om du behöver hjälp med Tripp Lite PDUMNH16HVAT ställ en fråga nedan och andra användare kommer att svara dig
Elskena Tripp Lite Manualer
22 September 2024
14 September 2024
14 September 2024
8 September 2024
3 September 2024
31 Augusti 2024
30 Augusti 2024
29 Augusti 2024
28 Augusti 2024
28 Augusti 2024
Elskena Manualer
- Elskena Philips
- Elskena Apc
- Elskena Act
- Elskena Icy Box
- Elskena Brennenstuhl
- Elskena Nedis
- Elskena Eglo
- Elskena Caliber
- Elskena Yato
- Elskena Eminent
- Elskena Vivanco
- Elskena DataVideo
- Elskena Energenie
- Elskena Hama
- Elskena GoGEN
- Elskena Steren
- Elskena Digitus
- Elskena Ufesa
- Elskena Sven
- Elskena Konig
- Elskena Ubiquiti Networks
- Elskena Eaton
- Elskena CyberPower
- Elskena Ewent
- Elskena HQ
- Elskena ATen
- Elskena Kindermann
- Elskena REV
- Elskena Lanberg
- Elskena Anton/Bauer
- Elskena StarTech.com
- Elskena Oregon Scientific
- Elskena Intellinet
- Elskena Kopp
- Elskena Furman
- Elskena Legrand
- Elskena Panduit
- Elskena EVOline
- Elskena V7
- Elskena Bachmann
- Elskena Oehlbach
- Elskena Kondator
- Elskena Geist
- Elskena Salicru
- Elskena Bauhn
- Elskena Adam Hall
- Elskena Panamax
- Elskena Altronix
- Elskena Middle Atlantic
- Elskena Qian
- Elskena Tecnoware
- Elskena Huslog
Nyaste Elskena Manualer
14 Mars 2025
10 Mars 2025
10 Mars 2025
10 Mars 2025
27 Februari 2025
21 Februari 2025
21 Februari 2025
20 Februari 2025
14 Januari 2025
8 Januari 2025