Tripp Lite PDUMNV30HVNET Bruksanvisning
Tripp Lite
Elskena
PDUMNV30HVNET
Läs nedan 📖 manual på svenska för Tripp Lite PDUMNV30HVNET (48 sidor) i kategorin Elskena. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/48
1
Owner’s Manual
Monitored Rack PDU
Switched Rack PDU
0U (Vertical) Format
Important Safety Instructions 2
Monitored Rack PDU Features 2
Switched Rack PDU Features 3
Installation 3
Features 8
Configuration and Operation 11
Service 11
Warranty and Product Registration 12
Español 13
Français 25
Русский 37
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an
ISOBAR6ULTRA surge protector—
a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2016 Tripp Lite. All rights reserved.
PDUMNV20HVNET
(208/230V 16 Amp Model)
Series Number: AGPD7897
PDUMNV30HVNET
(208V 24 Amp Model)
Series Number: AGPD7898
PDUMNV32HV2
(200-240V 32A Model)
Series Number: AG00CA
16-10-210-933667.indb 1 12/19/2016 4:26:09 PM
2
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed
during the installation, operation, and storage of this product. Failure to
heed these instructions and warnings will void the product warranty.
Important Safety Instructions
Monitored Rack PDU Features
• The PDU provides the convenience of multiple outlets, but DOES NOT provide surge or line
noise protection for connected equipment.
• The PDU is designed for indoor use only, in a controlled environment, away from excess
moisture, temperature extremes, conductive contaminants, dust or direct sunlight.
• Keep indoor ambient temperature between 0°C and 50°C (32°F and 122°F).
• The PDU must be installed by a qualified technician only.
• Do not attempt to mount the PDU to an insecure or unstable surface.
• Install in accordance with National Electrical Code standards. Be sure to use the proper
overcurrent protection for the installation, in accordance with the plug/equipment rating.
• Connect the PDU to an outlet that is in accordance with your local building codes and that is
adequately protected against excess currents, short circuits and earth faults.
• The electrical outlets supplying power to the equipment should be installed near the
equipment and easily accessible.
• Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that
eliminate the connection to ground.
• Be sure to provide a local disconnect device on any models that are permanently installed
without a plug that is easily accessible.
• Never attempt to install electrical equipment during a thunderstorm.
• Individual equipment connected to the PDU should not draw more current than the individual
PDU’s outlet’s rating.
• The total load connected to the PDU must not exceed the maximum load rating for the PDU.
• Do not attempt to modify the PDU, input plugs or power cables.
• Do not drill into or attempt to open any part of the PDU housing. There are no user-
serviceable parts inside.
• Do not attempt to use the PDU if any part of it becomes damaged.
• Use of this equipment in life support applications where failure of this equipment can
reasonably be expected to cause the failure of the life support equipment or to significantly
affect its safety or effectiveness is not recommended.
• Network interface enables remote power monitoring and event notification.
• Digital amp meter for on-site load monitoring.
• Optional EnviroSense2 modules (E2MT, E2MTDO, E2MTDI, E2MTHDI) allow for a variety of
environmental monitoring and control options.
• Toolless button-mount installation in Tripp Lite SmartRack
® and many third-party enclosures.
16-10-210-933667.indb 2 12/19/2016 4:26:09 PM
3
Switched Rack PDU Features
• Network interface enables remote power monitoring and individual outlet control.
• Individually controllable outlets allow remote rebooting of locked-up network devices.
• Digital amp meter for on-site load monitoring.
• Optional EnviroSense2 modules (E2MT, E2MTDO, E2MTDI, E2MTHDI) allow for a variety of
environmental monitoring and control options.
• Toolless button-mount installation in Tripp Lite SmartRack and many third-party enclosures.
Mounting the PDU
Note: The illustrations may differ somewhat from your PDU model. Regardless of configuration, the user must
determine the fitness of hardware and procedures before mounting. The PDU and included hardware are
designed for common rack and rack enclosure types and may not be appropriate for all applications. Exact
mounting configurations may vary. Screws for attaching the mounting brackets and cord retention shelf to the
PDU are included. Use only the screws supplied by the manufacturer, or their exact equivalent (#6-32, ¼"
flat head).
If installing the PDU in a rack that has button-mount slots, you only need to perform step 1-1 .
If your rack enclosure does not have button-mount slots, proceed to step 1-2 .
Installation
1-1 To install the PDU in a rack equipped
with button-mount slots, insert the
mounting buttons on the rear of the
PDU into the button-mount slots on
the rack and slide the PDU down until
the mounting buttons engage the
narrow section of the button-mount
slots.
Note: To install the PDU with its outlets
facing the rear of the rack, use the
included PDUMVROTATEBRKT accessory.
This V-shaped bracket provides a mounting
button on one leg of the V and a button-
mount slot on the other, effectively
repositioning the mounting buttons. See
Features section for image.
1-2 Attach the mounting brackets to the
PDU.
1-3 (Optional) Attach the cord retention
bracket(s) to the PDU.
1-4 Attach the PDU to a vertical rail in
your rack or rack enclosure. Use the
included mounting hardware to attach
the mounting brackets to the rail.
1-2
1-1
1-3 1-4
16-10-210-933667.indb 3 12/19/2016 4:26:11 PM
Produktspecifikationer
| Varumärke: | Tripp Lite |
| Kategori: | Elskena |
| Modell: | PDUMNV30HVNET |
Behöver du hjälp?
Om du behöver hjälp med Tripp Lite PDUMNV30HVNET ställ en fråga nedan och andra användare kommer att svara dig
Elskena Tripp Lite Manualer
22 September 2024
14 September 2024
14 September 2024
8 September 2024
3 September 2024
31 Augusti 2024
30 Augusti 2024
29 Augusti 2024
28 Augusti 2024
28 Augusti 2024
Elskena Manualer
- Elskena Philips
- Elskena Apc
- Elskena Act
- Elskena Icy Box
- Elskena Brennenstuhl
- Elskena Nedis
- Elskena Eglo
- Elskena Caliber
- Elskena Yato
- Elskena Eminent
- Elskena Vivanco
- Elskena DataVideo
- Elskena Energenie
- Elskena Hama
- Elskena GoGEN
- Elskena Steren
- Elskena Digitus
- Elskena Ufesa
- Elskena Sven
- Elskena Konig
- Elskena Ubiquiti Networks
- Elskena Eaton
- Elskena CyberPower
- Elskena Ewent
- Elskena HQ
- Elskena ATen
- Elskena Kindermann
- Elskena REV
- Elskena Lanberg
- Elskena Anton/Bauer
- Elskena StarTech.com
- Elskena Oregon Scientific
- Elskena Intellinet
- Elskena Kopp
- Elskena Furman
- Elskena Legrand
- Elskena Panduit
- Elskena EVOline
- Elskena V7
- Elskena Bachmann
- Elskena Oehlbach
- Elskena Kondator
- Elskena Geist
- Elskena Salicru
- Elskena Bauhn
- Elskena Adam Hall
- Elskena Panamax
- Elskena Altronix
- Elskena Middle Atlantic
- Elskena Qian
- Elskena Tecnoware
- Elskena Huslog
Nyaste Elskena Manualer
10 Mars 2025
10 Mars 2025
10 Mars 2025
27 Februari 2025
21 Februari 2025
21 Februari 2025
20 Februari 2025
14 Januari 2025
8 Januari 2025
1 Januari 2025