Tripp Lite Protect It! SK120USB Bruksanvisning

Tripp Lite Inte kategoriserad Protect It! SK120USB

Läs nedan 📖 manual på svenska för Tripp Lite Protect It! SK120USB (4 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/4

1111 W. 35th Street Chicago, IL 60609 USA • www.tripplite.com/support

® is a registered trademark of Tripp Lite.

Owner’s Manual

WARRANTY

REGISTRATION:

to win a FREE Tripp Lite product—

www.tripplite.com/warranty

Protect It!® Wall-Mount

Surge Suppressors with

Dedicated USB Charging Ports

Models: SK30USB, SK120USB

Installation 2

Lifetime Limited Warranty 3

Ultimate Lifetime Insurance Policy 4

Warranty Registration 3

Important Safety Instructions 2

13-05-275 93-32C1-EN.indd 1 6/14/2013 9:23:41 AM

Installation

Connect Your Surge Suppressor to the AC Power Line: Plug the surge suppressor directly into

a 3-wire grounded, 120V AC outlet.

Secure Surge Suppressor to Outlet Using Included Mounting Screw (SK30USB only):

Securing the surge suppressor to the outlet will prevent accidental disconnection. Remove the wall

outlet cover plate and plug in surge suppressor. Screw in the included mounting screw to attach

the surge suppressor to the outlet.

Check Your Surge Suppressor’s Diagnostic Indicator Lights: If your surge suppressor features

diagnostic LEDs or indicators, check them prior to connecting your equipment. They will indicate

various operating conditions when the surge suppressor is plugged into a live 120V AC outlet and

the surge suppressor’s power switch is on.

“PROTECTED” LED: Indicates the surge suppression components are intact and providing

complete protection against surges. If this LED does not illuminate, some of the surge suppression

components are not functioning, and the unit should be replaced. Visit www.tripplite.com/support.

Connect Your Equipment to the Surge Suppressor’s AC Outlets: Plug your equipment’s power

cords (including 2-wire devices) into the surge suppressor’s AC outlets. Select models feature

integrated safety covers which cover the outlets when not in use. Other models feature special

widely-spaced outlets to accommodate transformers without covering other outlets. DO NOT plug

in extension cords. DO NOT OVERLOAD the surge suppressor’s outlets. The surge suppressor can

accommodate a total equipment load of up to 15 amps (whether plugged into a single outlet or

spread out over multiple outlets).

USB Charging Ports: Two USB charging ports are capable of delivering up to 2.1 A total. This will

provide enough power to charge the most demanding devices, including smartphones, tablets and

MP3 players.

SAVE THESE INSTRUCTIONS

CAUTION! DO NOT connect to an ungrounded outlet. DO NOT use with 2-wire extension cords

or adapters. This surge suppressor is designed for indoor use only. Install the surge suppressor

away from heat-emitting appliances such as radiators or heat registers. Do not install where

excessive moisture is present. Do not plug extension cords into it. Never install electrical,

telephone, network or coaxial wiring during a lightning storm. Do not drill into any part of the

housing or open the housing for any reason. There are no user-serviceable parts inside.

Important Safety Instructions

• Use of this equipment in life support applications where failure of this equipment can reasonably

be expected to cause the failure of the life support equipment or to significantly affect its safety

or effectiveness is not recommended. Do not use this equipment in the presence of a

flammable anesthetic mixture with air, oxygen or nitrous oxide.

13-05-275 93-32C1-EN.indd 2 6/14/2013 9:23:41 AM

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and

workmanship for its lifetime. If the product should prove defective in material or workmanship within that period, Seller will repair

or replace the product, in its sole discretion. Service under this Warranty can only be obtained by your delivering or shipping the

product (with all shipping or delivery charges prepaid) to: Tripp Lite, 1111 W. 35th St., Chicago, IL 60609. Seller will pay return

shipping charges.

The warranties of all TRIPP LITE surge suppressors are null and void if they have been connected to the output of any UPS system.

The warranties of all TRIPP LITE UPS Systems are null and void if a surge suppressor has been connected to its output receptacles.

THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR

NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO

THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY

OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY

EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied

warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages, so the above

limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which

vary from jurisdiction to jurisdiction.)

WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the

use intended. Since individual applications are subject to great variation, the manufacturer makes no representation or warranty

as to the suitability or fitness of these devices for any specific application.

The policy of Tripp Lite is one of continuous improvement. Specifications are subject to change without notice.

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series

number. The series number can be found on the product nameplate label, along with all required approval markings and

information. When requesting compliance information for this product, always refer to the series number. The series number should

not be confused with the marketing name or model number of the product.

Lifetime Limited Warranty

Warranty Registration

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically entered into

a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

13-05-275 93-32C1-EN.indd 3 6/14/2013 9:23:41 AM

Produktspecifikationer

Varumärke:	Tripp Lite
Kategori:	Inte kategoriserad
Modell:	Protect It! SK120USB
Färg på produkten:	Grey, White
Antal effektnivåer:	3
Värmekälla:	Electrisch
Bredd:	740 mm
Djup:	210 mm
Höjd:	480 mm
Snäll:	Radiator
Avfrostningsfunktion:	Ja
LED-indikatorer:	Ja
På / Av knapp:	Ja
Sladdförvaring:	Ja
Justerbar termostat:	Ja
Handvat(en):	Ja
Upphängningssystem för väggen:	Ja
Mått (B x D x H):	740 x 210 x 480 mm
Bärbar:	Ja
AC-ingångsspänning:	230 V
AC-ingångsfrekvens:	50 Hz
Lämplig för rumsvolymer upp till:	60 m³
Värmekraft:	2000 W
Placeringsalternativ:	Muur
Värmeeffekt (min):	750 W