Tripp Lite SmartRack SRWO16US Bruksanvisning

Tripp Lite Inte kategoriserad SmartRack SRWO16US

Läs nedan 📖 manual på svenska för Tripp Lite SmartRack SRWO16US (20 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/20
Owner’s Manual
Hinged Open Frame
Wall-Mount Server Rack
Models: SRWO12US2, SRWO16US
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2021 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR®
surge protector in our monthly drawing!
tripplite.com/warranty
Español 7 • Français 13
2
Tripp Lite’s SRWO12US2 and SRWO16US are perfect open frame rack solutions for applications where space is limited.
Heavy-duty construction and a wall-mount form factor keep equipment out of the way. The swinging door enables easy access
to rack-mounted equipment. The SRWO12US2 and SRWO16US accommodate all standard 19-inch rack-mount equipment,
up to 22 inches deep.
Wall-Mount Brackets (x2) Front Rail Assembly (x2) Swinging Door Assembly Hex Bolts (x16)
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that must be followed during the installation and operation
of the product described in this manual. Failure to comply may invalidate the warranty and cause property
damage or personal injury.
• Keep the rack in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and
gasses, conductive contaminants and dust.
• Leave adequate space at the front of the rack for proper ventilation.
• Inspect the shipping container and the rack for shipping damage. Do not use the rack if it is damaged.
• Leave the rack in the shipping container until it has been moved as close to the final installation location as possible.
• Install the rack in a structurally sound area capable of handling the load, the weight of the rack, all equipment that will be
installed in the rack and any other equipment that will be installed nearby.
• Save all packing materials for later use. Repacking and shipping the enclosure without the original packing materials may
cause product damage that may affect the warranty.
• Do not attempt to install the rack unassisted.
• Be sure to use four screws to secure the rack to a 16” on center stud wall using 5/16” minimum diameter lag bolts.
• Never secure the rack to plaster board alone. Always use the studs for these types of walls.
• Be sure to always have one side of the door latched when opening. Failure to do this will cause your equipment to fall out.
• Installation is to be performed by a SKILLED PERSON knowledgeable in mounting cabinets to surfaces intended to be used
in the end use application. It is the installer’s responsibility to choose appropriate hardware to mount the cabinet to a
desired surface and be sufficient to support the rated maximum load of 150 lbs.
• Install frame on wall using a level before placing the door on the frame rack.
• Do not attempt to install equipment without first wall-mounting and stabilizing the rack.
• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the
failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.
Introduction
Parts List
Important Safety Instructions
3
WARNING: Do not attempt to mount the rack to the wall with equipment mounted to the rack.
WARNING: The wall surface, the wall studs and all user-supplied mounting hardware must be able
to support the combined weight of the rack and all equipment that will be installed in the rack.
The rack can support an equipment load up to 150 lb. maximum, evenly distributed.
Important: Install the frame to the wall before placing the door on the frame rack.
1 Drill holes in the supporting surface per the mounting hole diagram below.
25 in.
[635 mm]
32 in.
[813 mm]
16 in.
[406.4 mm]
16 in.
[406.4 mm]
12U Cabinet Mounting Hole Pattern 16U Cabinet Mounting Hole Pattern
2 Assemble the front mounting rails to the wall-mount brackets using the included hex bolts.
Installation/Wall-Mounting
Front Rail Assembly
Wall-Mount
Brackets
Hex Bolts (x16)

Produktspecifikationer

Varumärke: Tripp Lite
Kategori: Inte kategoriserad
Modell: SmartRack SRWO16US

Behöver du hjälp?

Om du behöver hjälp med Tripp Lite SmartRack SRWO16US ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Tripp Lite Manualer

Tripp Lite

Tripp Lite EBP240V3501NB Bruksanvisning

21 Oktober 2024
Tripp Lite

Tripp Lite SmartRack SR45UBEXPNDNR3 Bruksanvisning

20 Oktober 2024
Tripp Lite

Tripp Lite SmartRack SRW12US Bruksanvisning

19 Oktober 2024
Tripp Lite

Tripp Lite SmartRack SRWALLBRKT2U Bruksanvisning

18 Oktober 2024
Tripp Lite

Tripp Lite B127A-1A1-BDBH Bruksanvisning

12 Oktober 2024
Tripp Lite

Tripp Lite BP36V15-2U Bruksanvisning

9 Oktober 2024
Tripp Lite

Tripp Lite RBC92-2U Bruksanvisning

9 Oktober 2024
Tripp Lite

Tripp Lite SU6KRT3UX Bruksanvisning

8 Oktober 2024
Tripp Lite

Tripp Lite SRCOMBO Bruksanvisning

8 Oktober 2024
Tripp Lite

Tripp Lite P566-015-VGA Bruksanvisning

7 Oktober 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024