Tripp Lite T040-001-HDMI Bruksanvisning

Läs nedan 📖 manual på svenska för Tripp Lite T040-001-HDMI (8 sidor) i kategorin Kablar för PC och kringutrustning. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
1
Owner’s Manual
HDMI/Mini HDMI
Cable Tester
Model: T040-001-HDMI
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved.
Este manual esta disponible en español en la página de Tripp Lite:
www.tripplite.com/support
Ce manuel est disponible en français sur le site Web de Tripp Lite :
www.tripplite.com/support
Русскоязычная версия настоящего руководства
представлена на веб-сайте компании Tripp Lite по адресу:
www.tripplite.com/support
10-413-933794-EN.indd 1 11/15/2017 9:41:19 A
2
Package Contents
Product Features
Master Unit
Remote Unit
Carrying Case
Owner’s Manual
All-in-one unit combines a Main Tester with a removable Remote Identifier
Compatible with HDMI versions 1.0 through 2.1
Fast and accurate verification of HDMI cables with Type A-A, A-C or C-C
connectors
Displays 19 pin-to-pin wire map and shield connection status to ensure
mapping continuity and proper configuration
Two adjustable test modes available: Continuity and Sweep
10-413-933794-EN.indd 2 11/15/2017 9:41:19 A
3
Operation
Note: Before testing, insert a 9V battery (not included) and ensure the cable being
tested is not yet connected to the tester.
Testing
Simply connect the desired cable to the unit, then switch the Sweep/OFF/
Continuity button to “Continuity” for sync testing, or “Sweep” for step-by-
step testing.
Note: During sync testing, all LEDs illuminate on the wire map at once. During step-by-
step testing, the LEDs will illuminate one at a time.
When testing uninstalled patch cable, you can leave the Main Tester and
Remote Identier connected.
When testing installed cable, you will need to remove the Remote
Identier from the Main Tester. Connect one end of the cable to the
appropriate connector on the Main Tester, and the other end of the cable to
the appropriate connector on the Remote Identifier.
Note: Upon switching to the desired testing mode, the LEDs on the Main Tester and
Remote Identifier will illuminate to indicate the results.
If testing HDMI A-to-A cables, use “A pin” side numbers found on both
the Main Tester and Remote Identifier. For HDMI A-to-C and C-to-C cables,
use “C pin” side numbers found on both the Main Tester and Remote
Identier.
10-413-933794-EN.indd 3 11/15/2017 9:41:19 A

Produktspecifikationer

Varumärke: Tripp Lite
Kategori: Kablar för PC och kringutrustning
Modell: T040-001-HDMI

Behöver du hjälp?

Om du behöver hjälp med Tripp Lite T040-001-HDMI ställ en fråga nedan och andra användare kommer att svara dig




Kablar för PC och kringutrustning Tripp Lite Manualer

Kablar för PC och kringutrustning Manualer

Nyaste Kablar för PC och kringutrustning Manualer