Tripp Lite U457-025-G1-WPG Bruksanvisning

Tripp Lite Inte kategoriserad U457-025-G1-WPG

Läs nedan 📖 manual på svenska för Tripp Lite U457-025-G1-WPG (16 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 14 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/16
Quick Start Guide
USB-C 3.1 SATA SSD/HDD
Water-Resistant Enclosure with
Built-In Cable for 2.5-Inch Drives
Models: U457-025-G1-WPG (USB 3.1 Gen 1, 5 Gbps),
U457-025-G2-WPB (USB 3.1 Gen 2, 10 Gbps)
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
surge protector in our monthly drawing!
tripplite.com/warranty
Español 5 • Français 9 • Русский 13
2
Product Features
Package Contents
System Requirements
U457-025-G1-WPG (SuperSpeed USB 3.1 Gen 1, 5 Gbps) or
U457-025-G2-WPB (SuperSpeed USB 3.1 Gen 2, 10 Gbps)
Mini Screwdriver
Screws (x10)
Washers (x10)
Quick Start Guide
• USB 3.1 Gen 1 (5 Gbps) port required to achieve maximum speeds for
U457-025-G1-WPG
USB 3.1 Gen 2 (10 Gbps) port required to achieve maximum speeds
for U457-025-G2-WPB
UASP-enabled host controller required to achieve UASP performance
2.5 in. SATA HDD or SSD with maximum height of 9.5 mm
Converts any 2.5 in. internal SATA SSD (solid state drive) or HDD
(hard disk drive) into an external hard drive for storing data
Designed for 2.5 in. SATA drive heights between 7 mm and 9.5 mm
Supports SATA III (6 Gbps), II (3 Gbps) and I (1.5 Gbps) drives
Backward compatible with USB 3.0, 2.0 and 1.1 devices
Water-resistant and dust-tight to comply with IP66 standards
UASP-compatible for enhanced performance
Bus-powered plug-and-play operation with no software or external
power required
3
Installation
1 Remove the back cover (side with the screw holes) of the SSD/HDD
enclosure.
2 Connect your 2.5 in. SATA SSD/HDD to the SATA connector.
3 Once the SATA SSD/HDD is securely in place, replace the back cover,
ensuring the screw holes line up with one another.
4 Using the included screwdriver, screws and washers, fasten the 10
screws and washers securely to the enclosure.
In order to comply with IP66 standards, screws need to be properly Note:
tightened to the enclosure.
5 Connect the built-in USB 3.1 Type-C cable to an available USB port on
your computer.
Drive Connection 22-Pin SATA Data + Power
USB Connection USB Type-C (Male)
Maximum Data Transfer Rate 10 Gbps (U457-025-G2-WPB)
5 Gbps (U457-025-G1-WPG)
SSD/HDD Supported 2.5 in. SATA I/II/III HDD/SSD
Operating Temperature 50° to 122°F (10° to 50°C)
Relative Humidity 10% to 80% RH, Non-Condensing
Dimensions 0.94 x 3.7 x 5.8 in. (24 x 94 x 148 mm)
Specifications

Produktspecifikationer

Varumärke: Tripp Lite
Kategori: Inte kategoriserad
Modell: U457-025-G1-WPG

Behöver du hjälp?

Om du behöver hjälp med Tripp Lite U457-025-G1-WPG ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Tripp Lite Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer