Troy-Bilt TB4620C XP Bruksanvisning
Läs nedan 📖 manual på svenska för Troy-Bilt TB4620C XP (56 sidor) i kategorin Sågmaskin. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/56
769-25598 / 00 06/20
Operator’s Manual
2-Cycle Chain Saw
TB4620C
TABLE OF CONTENTS
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Know Your Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Oil and Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Starting and Stopping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Cleaning and Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
SAVE THESE INSTRUCTIONS
IMPORTANT: Read this manual thoroughly before using this product. Follow all instructions.
All information, illustrations, and specifications in this manual are based
on the latest product information available at the time of printing. We
reserve the right to make changes at any time without notice.
The product may vary slightly from the illustrations contained in this
manual.
Copyright© 2020 MTD SOUTHWEST INC, All Rights Reserved.
SERVICE
DO NOT RETURN THIS UNIT TO THE RETAILER. PROOF OF
PURCHASE WILL BE REQUIRED FOR WARRANTY SERVICE.
For assistance regarding the assembly, operation or maintenance of
the unit, please call (in the United States) or 1-800-828-5500 1-800-
668-1238 (in Canada). Additional information can be found at
www.troybilt.com www.troybilt.ca (in the United States) or (in
Canada).
Warranty service is available through an authorized service center.
To locate a service center in your area, please visit our website or
call the number listed above. Service on this unit, both within and
after the warranty period, should only be performed by an
authorized and approved service center. When servicing, use only
identical replacement parts.
Register your product at www.troybilt.com (US) or
www.troybilt.ca (Canada) to have parts, owner manuals, and
warranty information at your fingertips.
SAFETY
SPARK ARRESTOR NOTE
NOTE: For users on U.S. Forest Land and in the states of
California, Maine, Oregon and Washington. All U.S. Forest Land
and the state of California (Public Resources Codes 4442 and
4443), Oregon and Washington require, by law that certain internal
combustion engines operated on forest brush and/or grass-covered
areas be equipped with a spark arrestor, maintained in effective
working order, or the engine be constructed, equipped and
maintained for the prevention of fire. Check with your state or local
authorities for regulations pertaining to these requirements. Failure
to follow these requirements could subject you to liability or a fine.
This unit is factory equipped with a spark arrestor. If it requires
replacement, ask your LOCAL SERVICE DEALER to install the
Accessory Part #753-08106 Muffler Assembly.
Read the operator’s manual and follow all warnings and safety
instructions. Failure to do so can result in serious injury to the
operator and/or bystanders.
SYMBOL MEANING
WARNING: Signals a SERIOUS hazard.
Failure to obey a safety WARNING CAN signal result in
serious injury to yourself or to others.
CAUTION: Signals a MODERATE hazard.
Failure to obey a safety signal result in CAUTION MAY
property damage or injury to yourself or to others.
The purpose of safety symbols is to attract your attention to
possible dangers. The safety symbols, and their explanations,
deserve your careful attention and understanding. The safety
warnings do not by themselves eliminate any danger. The
instructions or warnings they give are not substitutes for proper
accident prevention measures.
NOTE: Advises you of information or instructions vital to the
operation or maintenance of the equipment.
DANGER: Signals an EXTREME hazard.
Failure to obey a safety signal result in DANGER WILL
serious injury or death to yourself or to others.
2
SAFETY WARNINGS FOR GAS UNITS
• Store fuel only in containers specifically designed and approved
for the storage of such materials.
• Always stop the engine and allow it to cool before filling the
tank. Never remove the fuel tank cap or add fuel when the
engine is hot. Always loosen the fuel tank cap slowly to relieve
any pressure in the tank before fueling.
• Always mix and add fuel in a clean, well-ventilated outdoor area
where there are no sparks or flames. DO NOT smoke.
• Never operate the unit without the fuel cap securely in place.
• Avoid creating a source of ignition for spilled fuel. Wipe up any
spilled fuel from the unit immediately, before starting the unit.
Move the unit at least 30 ft. (9.1 m) from the fueling source and
site before starting the engine. DO NOT smoke.
• Never start or run the unit inside a closed room or building.
Breathing exhaust fumes can kill. Operate this unit only in a well
ventilated outdoor area.
• IMPORTANT SAFETY INSTRUCTIONS •
WARNING: Use caution when handling fuel.
Gasoline is highly flammable and its vapors can explode if
ignited. Take the following precautions:
READ ALL INSTRUCTIONS BEFORE OPERATING
• Read the instructions carefully. Be familiar with the controls and
proper use of the unit. Know how to stop the unit and disengage
the controls quickly.
• Do not operate this unit when tired, ill or under the influence of
alcohol, drugs or medication.
• Never allow children to operate the unit. Never allow adults to
operate the unit without proper instruction.
• All guards and safety attachments must be installed properly
before operating the unit.
• Inspect the unit before use. Replace damaged parts. Check for
fuel leaks. Make sure all fasteners are in place and secure.
Replace parts that are cracked, chipped, or damaged in any
way. Do not operate the unit with loose or damaged parts.
• Be aware of risk of injury to the head, hands and feet.
• Carefully inspect the area before starting the unit. Remove
rocks, broken glass, nails, wire, string and other objects that
may be thrown or become entangled with the unit.
• Clear the area of children, bystanders and pets; keep them
outside a 50-foot (15 m) radius, at a minimum. Even then, they are
still at risk from thrown objects. Encourage bystanders to wear
eye protection. If you are approached, stop the unit immediately.
• Squeeze the throttle control and check that it returns
automatically to the idle position. Make all adjustments or
repairs before using the unit.
WARNING: When using the unit, all safety rules
must be followed. Please read these instructions before
operating the unit in order to ensure the safety of the
operator and any bystanders. Please keep these
instructions for later use.
WARNING: This product can expose you to
chemicals including engine exhaust, which is known to the
State of California to cause cancer, and carbon monoxide,
which is known to the State of California to cause birth
defects or other reproductive harm. For more information
go to www.P65Warnings.ca.gov.
3
WHILE OPERATING
• Wear safety glasses or goggles that meet current ANSI Z87.1
standards and are marked as such. Wear ear/hearing protection
when operating this unit. Wear a face mask or dust mask if the
operation is dusty. Use a hard hat or other type of safety helmet.
• Wear safety boots and protective gloves. Wear heavy, snug-
fitting clothes, including long pants and a long-sleeve shirt. Do
not wear loose clothing, jewelry, short pants, sandals or go
barefoot. Secure hair above shoulder level.
• Make sure the saw chain is not in contact with anything before
starting the unit.
• Use the unit only in daylight or good artificial light.
• Avoid accidental starting. Be in the starting position whenever
pulling the starter rope. The operator and unit must be in a stable
position while starting. Refer to Starting and Stopping.
• Use the right tool. Only use this tool for its intended purpose: to
cut wood. Do not use the unit for cutting plastic, masonry or
other non-wood building materials. Only use the unit as
described in this manual.
• Keep all body parts away from the saw chain when the unit is
running. Do not touch or try to stop moving parts.
• Do not touch the engine or muffler. These parts get extremely hot
from operation, even after the unit is turned off.
• Do not operate the unit faster than the speed needed to do the job.
Do not run the unit at high speed when not in use.
• Do not force the unit, especially near the end of a cut. It will do a
better, safer job when used at the intended rate.
• Always turn the engine off when operation is delayed, when
setting the unit down or when carrying the unit from one location
to another. Make sure all moving parts come to a complete stop.
• Carry the unit by the front handle with the muffler positioned
away from the body and the guide bar positioned to the rear.
Cover the guide bar and saw chain with the scabbard when
carrying the unit.
• If you strike or become entangled with a foreign object, stop the
unit immediately and check for damage. Do not operate the unit
before repairing damage. Do not operate the unit with loose or
damaged parts.
• Use only original equipment manufacturer (OEM) replacement
parts and accessories for this unit. These are available from your
authorized service dealer. Use of any other parts or accessories
could lead to serious injury to the user, or damage to the unit,
and void the warranty.
• Keep the unit clean. Carefully remove vegetation and other
debris that could block moving parts.
• To reduce fire hazard, replace a faulty muffler and spark arrestor.
Keep the engine and muffler free from grass, leaves, excessive
grease or carbon build up.
• If the unit starts to vibrate abnormally, stop the unit immediately.
Inspect the unit for the cause of the vibration. Vibration is
generally an indicator of trouble.
• Keep the work area clean. Cluttered areas invite injuries. Do not
start cutting until the work area is clear and free from
obstructions. Make sure there is secure footing and a planned
retreat path from falling trees or branches.
• Do not cut near electrical cables or power lines. Keep at least 50
feet (15 m) away from all power lines.
• For safer, more effective performance, make sure the guide bar
and chain are properly cleaned, lubricated, tightened and
sharpened. Check the guide bar and chain at frequent intervals
for proper adjustment.
• When cutting a limb that is under tension, use extreme caution.
When the tension is released, the limb could spring back and
strike the operator, causing severe injury or death.
• Use extreme caution when cutting small-sized brush and
saplings, as slender material may catch the saw chain and be
whipped toward the operator or pull the operator off balance.
• This saw is classified by UL as a Class 1C saw in accordance
with CSA Z62.1-03. It is intended for infrequent use by
homeowners, cottagers and campers, and for general
applications such as clearing, pruning, cutting firewood, etc. It is
not intended for prolonged use. If the intended use involves
prolonged periods of operation, this may cause circulatory
problems in the user’s hands due to vibration.
• Do not operate the unit in a tree or on a ladder unless
specifically trained to do so.
• Never remove, modify or make inoperative any safety device
furnished with the unit.
• Do not use the unit in the presence of flammable liquids or gases.
• Do not attempt operations beyond the operator’s capacity or
experience.
• Do not operate a unit that is damaged, improperly adjusted or
not completely and securely assembled. Make sure moving
parts stop when the unit is turned off. Do not use the unit if it
does not turn on and off properly. Have defective parts replaced
by an authorized service dealer.
KICKBACK SAFETY
Understanding Kickback
A basic understanding of kickback can help reduce or eliminate the
element of surprise and the chance of kickback-related injury.
Sudden surprise contributes to accidents.
• can happen when the upper tip of the Rotational Kickback
guide bar contacts an object while the chain is moving (Fig. A).
This can cause the chain to dig into the object and momentarily
stop moving. The guide bar is then kicked up and back toward
the operator in a lightning-fast reverse reaction.
•Linear Kickback can happen when the wood on either side of a
cut closes in and pinches the moving saw chain along the top of
the guide bar (Fig. B). This can cause the chain to instantly stop.
The chain force is then reversed, causing the saw to move in the
opposite direction, sending the saw straight back toward the
operator.
• can happen when the moving chain on the bottom of the Pull-In
guide bar hits a foreign object inside the wood. This can cause
the chain to suddenly stop. The saw is then pulled forward and
away from the operator, which could potentially result in the loss
of control of the saw.
WARNING: Kickback may occur when the
nose or tip of the guide bar touches an object, or when the
wood closes in and pinches the saw chain in the cut. In
some cases, tip contact may cause a lightening-fast
reverse action, kicking the guide bar rapidly back to wards
the operator. Pinching the saw chain along the top of the
guide bar may push the guide bar rapidly back towards the
operator. Either of these reactions may cause a loss of
control over the saw, which could result in serious injury to
the user. Contact with foreign objects within the wood can
also induce a loss of chain saw control.
Produktspecifikationer
| Varumärke: | Troy-Bilt |
| Kategori: | Sågmaskin |
| Modell: | TB4620C XP |
Behöver du hjälp?
Om du behöver hjälp med Troy-Bilt TB4620C XP ställ en fråga nedan och andra användare kommer att svara dig
Sågmaskin Troy-Bilt Manualer
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
Sågmaskin Manualer
- Sågmaskin Bosch
- Sågmaskin AEG
- Sågmaskin DeWalt
- Sågmaskin Ford
- Sågmaskin Al-ko
- Sågmaskin Silverline
- Sågmaskin Brennenstuhl
- Sågmaskin Ferm
- Sågmaskin Ozito
- Sågmaskin Gude
- Sågmaskin Makita
- Sågmaskin Draper
- Sågmaskin Tryton
- Sågmaskin Hitachi
- Sågmaskin Black And Decker
- Sågmaskin Vonroc
- Sågmaskin Remington
- Sågmaskin Maestro
- Sågmaskin Stanley
- Sågmaskin Skil
- Sågmaskin Hyundai
- Sågmaskin Hilti
- Sågmaskin Ryobi
- Sågmaskin Florabest
- Sågmaskin Festool
- Sågmaskin Metabo
- Sågmaskin Parkside
- Sågmaskin Worx
- Sågmaskin Meec Tools
- Sågmaskin Milwaukee
- Sågmaskin Hikoki
- Sågmaskin Sun Joe
- Sågmaskin Dremel
- Sågmaskin Sovereign
- Sågmaskin Tacklife
- Sågmaskin Hazet
- Sågmaskin Einhell
- Sågmaskin Gardena
- Sågmaskin Baumr-AG
- Sågmaskin Yard Force
- Sågmaskin Ferrex
- Sågmaskin Husqvarna
- Sågmaskin Maktec
- Sågmaskin Bort
- Sågmaskin Craftsman
- Sågmaskin Power Craft
- Sågmaskin Powerplus
- Sågmaskin Stiga
- Sågmaskin Porter-Cable
- Sågmaskin Cotech
- Sågmaskin Genesis
- Sågmaskin Trotec
- Sågmaskin Cobra
- Sågmaskin Hammer
- Sågmaskin Topcraft
- Sågmaskin Texas
- Sågmaskin Martha Stewart
- Sågmaskin Spear & Jackson
- Sågmaskin Scheppach
- Sågmaskin Atika
- Sågmaskin Gamma
- Sågmaskin McCulloch
- Sågmaskin Sterwins
- Sågmaskin Powerfix
- Sågmaskin Stihl
- Sågmaskin Bavaria
- Sågmaskin Dolmar
- Sågmaskin Shindaiwa
- Sågmaskin Lionelo
- Sågmaskin Duro
- Sågmaskin Prime3
- Sågmaskin Zipper
- Sågmaskin Mafell
- Sågmaskin Greenworks
- Sågmaskin Fieldmann
- Sågmaskin Qualcast
- Sågmaskin Fuxtec
- Sågmaskin IKRA
- Sågmaskin Truper
- Sågmaskin Masport
- Sågmaskin Grizzly
- Sågmaskin Echo
- Sågmaskin Solo
- Sågmaskin Cocraft
- Sågmaskin Maruyama
- Sågmaskin Herkules
- Sågmaskin Meister Craft
- Sågmaskin Toolcraft
- Sågmaskin RIDGID
- Sågmaskin Batavia
- Sågmaskin Proxxon
- Sågmaskin Gardenline
- Sågmaskin Holzmann
- Sågmaskin Oregon Scientific
- Sågmaskin Elu
- Sågmaskin Max Bahr
- Sågmaskin Plantiflor
- Sågmaskin Lux Tools
- Sågmaskin Goon
- Sågmaskin Triton
- Sågmaskin BGU
- Sågmaskin Wolfcraft
- Sågmaskin Dedra
- Sågmaskin Kreg
- Sågmaskin Sthor
- Sågmaskin Verto
- Sågmaskin Vulcan
- Sågmaskin Anova
- Sågmaskin Challenge Xtreme
- Sågmaskin Global
- Sågmaskin Graphite
- Sågmaskin Narex
- Sågmaskin Rikon
- Sågmaskin Duro Pro
- Sågmaskin Alpha Tools
- Sågmaskin Toolson
- Sågmaskin Felisatti
- Sågmaskin Toledo
- Sågmaskin Erbauer
- Sågmaskin Exakt
- Sågmaskin Jonsered
- Sågmaskin Gude Pro
- Sågmaskin MSW
- Sågmaskin Royal Catering
- Sågmaskin Robust
- Sågmaskin Ultranatura
- Sågmaskin FIXIT
- Sågmaskin Einhell Bavaria
- Sågmaskin Ergotools Pattfield
- Sågmaskin MyTool
- Sågmaskin McKenzie
- Sågmaskin Proviel
- Sågmaskin Morrison
- Sågmaskin Garland
- Sågmaskin Bavaria By Einhell
- Sågmaskin Donau Elektronik
- Sågmaskin Chicago Pneumatic
- Sågmaskin Rona
- Sågmaskin Bestgreen
- Sågmaskin CMI
- Sågmaskin MacAllister
- Sågmaskin TAURUS Titanium
- Sågmaskin Maxbear
- Sågmaskin Evolution
- Sågmaskin Extralink
- Sågmaskin Yellow Garden Line
- Sågmaskin Stalco
Nyaste Sågmaskin Manualer
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
22 Oktober 2024