Turbosound NuQ-6 Bruksanvisning

Turbosound högtalare NuQ-6

Läs nedan 📖 manual på svenska för Turbosound NuQ-6 (4 sidor) i kategorin högtalare. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/4

Quickstart Guide

NuQ series

NuQ Series Quickstart Guide v1.2 - Page - 1

Models covered by this Quickstart Guide

NuQ-6, NuQ-8/DP, NuQ-10/DP, NuQ-12/DP, NuQ-15/DP, B-12DP, B-15/DP, B-18/DP.

Thank you for choosing a TURBOSOUND loudspeaker product for your application. If you would like further information

about this or any other TURBOSOUND product, please contact us on +44 (0)1403 711447. A detailed user manual on this

product range is available on our website at http://www.turbosound.com

http://www.turbosound.com

http://www.turbosound.comhttp://www.turbosound.com

Unpacking the Loudspeaker

After unpacking the unit please check carefully for damage. If damage is found, please notify your supplier at once. You,

the consignee, must instigate any claim. Please retain all packaging in case of future re-shipment.

System Requirements – Passive and Bi-amped Loudspeakers

The NuQ-6, NuQ-8, and NuQ-10 two-way loudspeakers are passive systems and

require only one amplifier channel for correct operation, the frequency splitting

between the LF driver and the HF driver being accomplished by the internal

passive crossover network built into each enclosure. They are equipped with

two Neutrik Speakon NL4MP connectors wired in parallel, serving as both input

and loop-out connections to additional speakers. The Speakon wiring details are

shown at the right. The NuQ-12 and NuQ-15 two-way loudspeakers are

switchable passive/bi-amped systems and require two amplifier channels when

used in bi-amped mode. To avoid wasting amplifier power you should use

heavy-duty speaker cable with a minimum wire size of 12 gauge (1.5mm²), and

preferably 10 gauge (2.5mm²) for longer runs. Always observe the correct

polarity as shown.

Amplifier considerations

NuQ series speaker enclosures should be driven by high quality power amplifiers designed for true professional use.

Amplifiers should be capable of delivering long term broadband power equal to the loudspeaker’s program power rating

equal to the loudspeaker’s program power rating

equal to the loudspeaker’s program power rating equal to the loudspeaker’s program power rating

at its stated nominal impedance

at its stated nominal impedanceat its stated nominal impedance. The use of under-powered amplifiers must be avoided as heavily clipped signals can

cause permanent loudspeaker damage.

Model

Model Model NuQ-6 NuQ-8 NuQ-10 NuQ-12 NuQ-15 B-15 B-18

Impedance

Impedance Impedance 8 8 8 Passive: 8

LF: 8 , HF: 6

Passive: 8

LF: 8 , HF: 6

8 8

RECOMMENDED AMPLIFIER

RECOMMENDED AMPLIFIER RECOMMENDED AMPLIFIER POWER RATING

POWER RATING

POWER RATINGPOWER RATING

The amplifier’s rated r.m.s. continuous power output (20Hz – 20kHz, each channel)

should be equal to the loudspeaker’s program power handling at its nominal impedance.

System Controllers and Bi-amplified systems

NuQ systems must be used with Turbosound LMS-D24 or LMS-D26 controllers, since these provide vital operating and

system security features. If you do not have a controller, DO NO

DO NO

DO NODO NOT USE

T USE

T USET USE the loudspeaker without one; please contact your

Turbosound dealer for further details.

(Pins 2+ and 2- not connected)

Passive Speakon

connections

Negative (-ve)

Positive (+ve)

Bi-amped Speakon

connections

LF Negative (-ve)

LF Positive (+ve)

HF Negative (-ve)

HF Positive (+ve)

Quickstart Guide

NuQ series

NuQ Quickstart Guide v1.2 - Page - 2

Turbosound LMS-D2X controllers provide factory presets for all NuQ systems, downloadable from the Turbosound

website, as well as additional user program slots.

1. Power up the controller(s) and associated power amplifiers.

2. Press RECALL

RECALL

RECALLRECALL to select the appropriate program from the preset menu using the ‘A’ ROTARY EN

A’ ROTARY EN

A’ ROTARY ENA’ ROTARY ENCODER

CODER

CODERCODER.

3. Press RECALL

RECALL

RECALLRECALL again to accept the preset. The controller will un-mute and is then ready for use.

Use as Monitor Wedges

NuQ 2-way systems double effectively as wedge monitors. The NuQ-6 provides both 33° and 45° wedge angles while all

other models feature a symmetrical 45° side angle.

Self-powered Loudspeakers

Powered NuQ loudspeakers feature very efficient integrated Class D amplifiers and control electronics modules, providing

a completely self-contained professional sound system. The XLR inputs are electronically balanced and are wired pin 2

hot, pin 3 cold, and pin 1 ground. Amplifiers will operate over a range of mains input voltages from 100V to 240V AC

without adjustment.



 Connect the mains power

Connect the mains power

Connect the mains powerConnect the mains power using the supplied Powercon mains lead. Check that the mains lead is suitable for use

in your area before connecting.



 Connect the signal input

Connect the signal input

Connect the signal input Connect the signal input from a professional mixing console to the signal in XLR, and link out to additional

powered loudspeakers if required



 Power up the loudspeaker.

Power up the loudspeaker.

Power up the loudspeaker. Power up the loudspeaker. It will un-mute after a short self-test routine; the loudspeaker is now ready for use

The B-12DP features an on-board amplifier configured to drive NuQ-6 or other satellite loudspeakers, as well as its own

internal 12” LF driver. The amplifier is also equipped with four factory presets with differing band gains which allow for

different configurations of satellite speakers. These are selectable via a push switch that toggles around the four available

presets, and these are listed below. Presets 2 to 4 are user editable using TurboDrive software.

Preset number

Preset number Preset number Function

Function

Function Function User editable?

User editable?

User editable? User editable?

Preset #1 B-12DP plus 2 x NuQ-6 satellite loudspeakers No – factory default

Preset #2 B-12DP plus up to 6 x NuQ-8 satellite loudspeakers Yes

Preset #3 B-12DP plus 2 x NuQ-8 satellite loudspeakers Yes

Preset #4 B-12DP plus 2 x any passive satellite loudspeakers Yes

Networking Capability

NuQ systems are designed to offer control and monitoring of system parameters over a BvNet network in real time using

a PC and TurboDrive™ software. LMS-D2X controllers are equipped with network cards and are pre-configured with

factory programs for all NuQ series models. Self-powered NuQ loudspeakers have built-in network functionality.



 Download the TurboDrive™ software

Download the TurboDrive™ software

Download the TurboDrive™ softwareDownload the TurboDrive™ software from the supplied CD or from www.turbosound.com

and follow the

installation instructions



 Install the drivers

Install the drivers

Install the driversInstall the drivers. If connecting via RS232 there is no need to install drivers. If connecting via USB install the USB

drivers which can be found on the CD that came with your Linea Research USB interface



 Networking multiple devices to a PC: BvNet is the method of connecting multiple devices – these can be controllers

and/or powered NuQ loudspeakers – and this is done with the Linea Research USB & RS232 Interface (available from

Turbosound). The interface enables devices to be connected to a PC either using RS232 or using USB. RS485 is the

Quickstart Guide

NuQ series

NuQ Series Quickstart Guide v1.2 - Page - 3

network protocol among the networked devices and is carried over CAT5-type cables. Minimum system requirements are:

PC with Pentium processor, Windows NT, 2000, XP, or Vista, CD ROM drive or internet access, RS232 or USB port



 RS232:Connect your computer to the BvNet interface using a standard 9-pin serial cable. External power is required for

RS232 operation and this should be supplied by the Linea Research Accessory Power Supply



 USB: Connect your computer to the BvNet interface using a USB Type A to USB Type B cable. External power is not

required when using USB



 Connect networked devices via RJ45 CAT5 cables



 Launch the TurboDrive™ software



 Application Authorisation: TurboDrive™ prompts for an Authorisation Code

Authorisation Code

Authorisation CodeAuthorisation Code on the first launch which is PJLUWZ

PJLUWZ

PJLUWZPJLUWZ



 Select the COM port from Network > Com Port



 Click the Online toolbar button



 Click on one of the devices that appear in the tree view to Launch the panel



 When the progress bar indicates ready, adjust the controls as required

Please refer to the TurboDrive™ User Guide for further information on networking.

Mounting and Fixing

NuQ series two-way cabinets are equipped with pole mount sockets for portable use on 35mm speaker stands or poles.

Bass cabinets are equipped with pole mount receptacles that allow two-way cabinets to be mounted at the correct height.

NuQ series cabinets can be suspended in permanent installations using optional shoulder eyebolts coupled to the internal

rigging points provided. To install using eyebolts, remove the appropriate countersunk screws and replace them with

eyebolts, which must have a thread length of at least 18mm. Use the rear rigging point to angle the cabinet for optimum

room coverage. Cabinets may be hung upside down if required.

Turbosound wall and ceiling brackets are optionally available for installing non-powered NuQ series cabinets. They are

also compatible with OmniMount™ wall and ceiling brackets. Some examples are shown below.

Model

Model Model Wall Mount

Wall Mount

Wall Mount Wall Mount Flying Yokes

Flying Yokes

Flying Yokes Flying Yokes Swivel

Swivel

Swivel Swivel

brackets

brackets brackets

Swivel

Swivel Swivel

extenders

extenders extenders

OmniMount™ Eyebolts

OmniMount™ Eyebolts OmniMount™ Eyebolts

NuQ-6 n/a NuQ-FY6 NuQ-SB6 n/a n/a M8

NuQ-8 WB-20B

PB-55

NuQ-FY8 NuQ-SB8 NuQ-SBE8 20.5 Series M10

NuQ-10 WB-20B

PB-55

NuQ-FY10 NuQ-SB10 NuQ-SBE10 60 Series M10

NuQ-12 WB-55B

PB-55

NuQ-FY12 n/a n/a 60 Series M10

NuQ-15 WB-55B

PB-55

NuQ-FY15 n/a n/a 120 Series M10

Produktspecifikationer

Varumärke:	Turbosound
Kategori:	högtalare
Modell:	NuQ-6
Färg på produkten:	Zwart
Vikt:	1760 g
Bredd:	125 mm
Djup:	100 mm
Höjd:	63.5 mm
Ljudnivå:	- dB
Förpackningens vikt:	2060 g
Förpackningens bredd:	190 mm
Djuppackning:	260 mm
Förpackningshöjd:	100 mm
Typ av förpackning:	Doos
Nuvarande:	8 - 4 A
På / Av knapp:	Ja
Certifiering:	TUV, cTUVus, CE, BSMI, FCC, CCC, EAC, RCM, KCC, CB
Avsedd för:	PC
Antal fans:	1 ventilator(en)
Strömspänningsskydd:	Over power, Over voltage, Overcharge, Overheating, Short circuit, Under voltage
80 PLUS certifiering:	80 PLUS Gold
Medeltid mellan fel (MTBF):	100000 uur
Totala tillgångar:	650 W
Typ av kylning:	Actief
Effektivitet:	90 procent
AC-ingångsspänning:	90 - 264 V
AC-ingångsfrekvens:	47 - 63 Hz
Drifttemperatur (TT):	0 - 50 °C
Harmoniserad systemkod (HS):	84733020
Ventilator diameter:	92 mm
ATX-strömkontakt (24-stift):	Ja
EPS-strömkontakt (8-stift):	Ja
Moderkorts strömkontakt:	24-pin ATX
Perifera (Molex) strömkontakter (4-stift):	4
Strömförsörjningsformfaktor (PSU):	SFX
Lagerteknik:	FDB
Power Factor Correction (PFC) typ:	Actief
Kombinerad effekt (+3,3V):	120 W
Kombinerad effekt (+12V):	650 W
Kombinerad effekt (+5V):	120 W
Max aktuell utgång (+3,3V):	20 A
Max strömutgång (+12V):	54.1 A
Max aktuell utgång (+5V):	20 A
Max strömutgång (-12V):	0.3 A
Max strömutgång (+5Vsb):	3 A
Antal SATA-strömkontakter:	8
Kabeltyp:	Modulair
ATX version:	3.42
Håll tid:	16 ms
PCI Express-strömkontakter (6+2-stift):	4
Fördröjningsområde Effekt Bra signal:	100 - 500 ms
EPS-strömkontakt (4+4-stift):	Ja