Uniden DWX 337 Bruksanvisning

Uniden Telefon DWX 337

Läs nedan 📖 manual på svenska för Uniden DWX 337 (5 sidor) i kategorin Telefon. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/5

AC adapter

(PS-0035)

If any items are missing or damaged, contact our Customer

Care Line immediately. Never use damaged products!

Need Help? Get answers 24/7 at our website: www.uniden.

com.

If You... Contact Uniden’s... Phone Number

have a queson or

problem Customer Care Line* 817-858-2929 or

800-297-1023

need a part or accessory Parts Department* 800-554-3988

need special assistance

due to a disability Accessibility Help Line 800-874-9314

(voice or TTY)

* During regular business hours, Central Standard Time. Visit our website for

detailed business hours.



DWX337 Waterproof Accessory Handset

User's Guide

What's in the box?

DWX337 waterproof

accessory handset

and water resistant

charger

Not pictured:

Factory installed

rechargeable baery

Belt Clip

IMPORTANT SAFETY INSTRUCTIONS!

When using your telephone equipment, basic safety precautions

should always be followed to reduce the risk of ire, electric shock

and injury to persons, including the following:

The charger is NOT waterproof: Do not use or place the charger

near water (e.g., near a bath tub, wash bowl, kitchen sink or

laundry tub, in a wet basement or near a swimming pool).

If the charger falls into the water, unplug the AC adapter before

removing it from the water. After you remove the charger from

the water, contact Customer Service (see the front cover for

contact information).

Wipe excess water off of the handset before returning it to the

charger.

Avoid using a telephone (other than a cordless type) during an

electrical storm. There may be a remote risk of electric shock

from lightning.

Do not use the telephone to report a gas leak in the vicinity of

the leak.

Use only the power cord and batteries indicated in this manual.

Do not dispose of batteries in a ire. They may explode. Check

with local codes for possible special disposal instructions.

Do not place the handset in any charging cradle without the

battery installed and the battery cover securely in place.

SAVE THESE INSTRUCTIONS!

Understanding the Waterproof Handset

The handset complies with JIS7 water submersion speciications.

It can remain submerged under 3 feet of water for up to 30

minutes without damage or loss of functionality.

If the handset falls into water, just remove it; you can continue

using the handset as normal.



The handset will still receive calls even if it is under water, but

you probably won’t be able to hear the ringer or the earpiece.

To avoid any accidents, do not try to use the handset while it is

still under water.

If you notice that the sound is distorted after your handset

is submerged in water, there might still be water around the

speaker and microphone. Just shake the handset to clear the

water, and the sound should return to normal.

Don’t place the handset where it will be subjected to direct

sunlight for long periods of time.

SETTING UP YOUR HANDSET

Charging the Baery

The handset's rechargeable battery is already installed. Before you

can charge the battery, you have to activate it.

Remove the cardboard spacer.

Press the activation pin according to

the directions on the label.

Remove the label once the handset

is activated.

Save the acvaon pin in case you need to change the

handset's acvaon status later (i.e., to deacvate the

handset when it will not be used for a long me). Use

the plasc acvaon pin or a blunt-pped object like

an uncurled paper clip to press the acvaon toggleto press the acvaon toggle

through the rubber seal. Do not use a sharp object; sharp. Do not use a sharp object; sharp

objects might puncture the rubber seal and jeopardize the

handset's waterproof status.

Connect the AC adapter to the charger's

AC IN 8V

jack and

set the cord into the notch. (This adapter might already be

connected.)

Plug the other end of the adapter into a standard 120V AC

power outlet.

Place the handset in the charger with the display facing

forward. The display on the handset should turn on. If the

handset display does not turn on, try one of the following:

Checking the AC adapter connection.

Seeing if the outlet is controlled by a wall switch.

Charge the handset completely (about 16 hours) before

using it.

Registering the Handset

Compable Bases

This handset is designed for use with Uniden's DECT3380 base.

Other Uniden DECT6.0 bases might be compatible with this

handset. For an up-to-date list of compatible bases for this handset,

see our website.

On the base, press and hold

Find

On the handset, press and hold

until the display says

Handset Registering (about 2 seconds).

Aer about 30 seconds, the handset display should say

Registraon Complete.

Test the connecon

Pick up the handset and press

Talk/Flash

. Make sure you get a dial

tone. (Press

End

to hang up.)

If... Try...

you don't hear a dial tone

the display says Registraon

Failed

Making sure the handset is fully

charged, then trying again.









Using your Handset

All features and operation for the handset are described in the

user's guide for one of the bases listed under the Compatible

Bases section.

User guides for all Uniden phones are available on our website

for free downloading.

IMPORTANT INFORMATION

Specicaons

AC Adapter

Part number PS-0035

Input voltage 120V AC, 60 Hz

Output voltage 8V AC @ 300mA

Baery pack Part number BT-1018

Capacity 500mAh, 2.4V DC

Use only the supplied AC adapter.

Be sure to use the proper adapter for the base and any

chargers.

Do not place the power cord where it creates a trip hazard or

where it could become chafed and create a ire or electrical

hazard.

Do not place the unit in direct sunlight or subject it to high

temperatures.

Baery Informaon

Fully charged, the battery should provide about 8 hours of talk

time and about 7 days of standby time. For best results, return

the handset to the cradle after each call to keep it fully charged.

Keep an eye on the battery status icon. When the battery gets

too low, the handset shows a low battery alert. If you hear a

strange beep during a call, check the display: if you see the low

battery alert, inish your conversation as quickly as possible

and return the handset to the cradle. If the handset is in

standby, none of the keys will operate.

With normal use, the battery should last about one year.

Replace the battery when the talk time becomes short even

when the battery is charged. To buy a replacement battery, call

the Parts Department listed on the front cover.

Replace the Rechargeable Handset Baery Pack

Follow these steps to replace the battery:

Unscrew the four screws holding the battery cover and

remove it.

Remove the old battery pack from the battery compartment.

Line up the new battery's connector with the jack inside the

battery compartment (the connector only its one way).

Push the connector in irmly. Tug on the battery wires gently

to make sure you have a good connection.

Before replacing the battery cover, check the rubber seal

located on the under side of the cover: make sure that the seal

is set in the groove and that there is no foreign matter under

the seal.

Note: If the rubber seal appears warn, nicked, or dried

out, you must replace it. New seals are available through

the Parts Department (see the cover page for contact

informaon).

Replace the battery cover; use the four screws to secure the

cover to the back of the handset.

Rechargeable Nickel-Metal-Hydride Baery Warning

CAUTION! Risk of explosion if baery is replaced by an incorrect

type! Dispose of used baeries according to the instrucons. Do

not open or mulate the baery. Disconnect the baery before

shipping this product.

This equipment contains a rechargeable Nickel-Metal-Hydride

battery.







Produktspecifikationer

Varumärke:	Uniden
Kategori:	Telefon
Modell:	DWX 337
Färg på produkten:	Roestvrijstaal
Värmekälla:	Natuurlijk gas
Vikt:	68400 g
Bredd:	1520 mm
Djup:	870 mm
Höjd:	1640 mm
Snäll:	Barbecue
Husmaterial:	Roestvrijstaal
Typ av material (överst):	Raster
Antal brännare/kokzoner:	3 zone(s)
Elektronisk tändning:	Ja
LED-indikatorer:	Temperatuur
Inbyggd funktion:	Nee
Vormfaktor:	Verrijdbaar
Justerbar termostat:	Ja
Typ av enhet:	Wielen
Totala tillgångar:	12300 W
Mått (B x D x H):	1520 x 870 x 1640 mm
Lock:	Ja
Coola handtag:	Ja
Bakyta (BXD):	660 x 500 mm
Hjulhjul:	Ja
Kokyta form:	Rechthoekig
Ben:	Nee
Rökfunktion:	Nee
Förvaringshylla:	Ja
Matlagningsplats:	3271 cm²
Brännande enhet:	Ja
Tändningssystem:	Snap-Jet
Sidobrännareffekt:	3500 W