V-Tac VT-8096 Bruksanvisning

V-Tac Lättnad VT-8096

Läs nedan 📖 manual på svenska för V-Tac VT-8096 (3 sidor) i kategorin Lättnad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/3
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to
access the manual in multiple languages.
INSTRUCTION MANUAL
LED BULKHEAD
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased the product. They are trained
and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty
does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installation of the product. The products
are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This
product is warranted for manufacturing defects only.
TECHNICAL DATA
MODEL VT-8096
SKU 10198, 10199, 10200
POWER 18W
LUMENS 1820 Lm
INPUT POWER AC: 220-240V, 50/60Hz
BEAM ANGLE 110°
CRI ≥80
DF ≥0.7
LIFE SPAN 25,000 Hours
ON/OFF CYCLE >15,000
OPERATING TEMPERATURE -20°C to +40°C
DIMENSION 195x38mm
*This product contains a light source of energy eciency class<F>, where <F> shall be replaced by the
energy class of the contained light source.
INSTALLATION INSTRUCTION
1
3 4
2
1. Drill holes on the wall, and plug the
expansion sleeve into the holes
3. Align with the hole position and fix
the lamp body with screws
4. installed, turn on the light electricity,
lamps and lanterns can normal use.
2. Connect the two input cables to L/N
Please make sure to turn o the power before starting the installation.
Installation must be performed by a qualified electrician.
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively
replaced by the manufacturer or his service agent or a similar qualified person in order
to avoid a hazard.
Terminal block not included.
The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person.
WARNING
This marking indicates that this
product should not be disposed
of with other household wastes.
Caution, Risk of electric shock Replaceable (LED Only) light
source by a professional
Non-replaceable
control gear
DISASSEMBLY INSTRUCTION
1.Disassemble the diuser
2.Remove the screw
3.Weld and remove the
input cable
Light source for
SLR testing

Produktspecifikationer

Varumärke: V-Tac
Kategori: Lättnad
Modell: VT-8096

Behöver du hjälp?

Om du behöver hjälp med V-Tac VT-8096 ställ en fråga nedan och andra användare kommer att svara dig




Lättnad V-Tac Manualer

Lättnad Manualer

Nyaste Lättnad Manualer