Viewsonic SW-091-3 Bruksanvisning

Läs nedan 📖 manual på svenska för Viewsonic SW-091-3 (12 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/12
1
Getting Started
Updated on October 2, 2017
Player App Installation
If the hardware you are using did not come pre-installed with the Revel Player app you will need to install
this first. Windows hardware utilizes a different app than Android hardware.
 Windows Hardware
1. Install the Revel Digital Player app
Open the Windows Store app on the player PC and search for “Revel Digital” or  . Onceuse this link
installed, start the Revel Digital app to get your registration code.
Android Hardware
1. Install the Revel Digital Player app
Open the Google Play app on your Android device, or browse to the  . Then searchGoogle Play Store
for “RevelDigital” or  . Once installed, start the Revel Digital app to get your registrationuse this link
code.
Revel Digital Worldwide Operations
Copyright © 2017
2
Device Registration
Registering a device makes it available in your Revel Digital account for management. Each player in your
network will need to registered. It is possible the device was pre-registered before being shipped in which
case no code will be presented and will start straight into scheduled content.
Registration Code
The first time the player app is started it will present a registration code similar to the following:
Login to Revel Digital
Access your Revel Digital account at  . If you don’t already have an account you’llhttp://as1.reveldigital.com
need to create one now.
Revel Digital Worldwide Operations
Copyright © 2017
3
Register New Device
Once logged in, click Devices, then click Register New Device.
Enter Registration Code
Enter the code from your player into the highlighted field.
Also take some time to accurately fill in the other fields including Timezone and Location. These fields can
be important to certain types of content.
When finished, click the Save  button.
Revel Digital Worldwide Operations
Copyright © 2017

Produktspecifikationer

Varumärke: Viewsonic
Kategori: Inte kategoriserad
Modell: SW-091-3
Vikt: 1800 g
Strömförsörjning: 24 – 36 V DC, 19 – 28 V AC
Processormodel: ARTPEC-2
Maximal upplösning: 704 x 576 Pixels
Typ av strömkälla: Power over Ethernet (PoE)
Minimal belysning: 0.3 Lux
Video rörelsedetektering: Ja
Brännvidd: 4.1 - 73.8 mm
Optisk sensorstorlek: 1/4 "
Anslutning för nätadapter: Ja
Bildsensortyp: CCD
Kamerans slutartid: 1/10000 - 1 s
Internminne: 32 MB
Anslutningar: RJ-45
Max 30 bilder per sekund: 30 fps
Nätverksprotokoll som stöds: IPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
IP-adressfilter: Ja
Flashminne: 8 MB
Power over Ethernet (PoE): Ja
Panoreringsintervall: 0 - 360 °
Mått (B x D x H): 225 x 144 x 144 mm
Strömförbrukning (typiskt): 28 W
Drifttemperatur (TT): 5 - 50 °C
Relativ luftfuktighet i drift (VV): 20 - 80 procent
Tiltvinkelområde: 0 - 90 °
Linsens betraktningsvinkel, horisontell: 2.8 °
Pre/post alarm buffert: 9 MB

Behöver du hjälp?

Om du behöver hjälp med Viewsonic SW-091-3 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Viewsonic Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer