Viking K-1205-IP-EWP Bruksanvisning

Viking Tillträdeskontrollsystem K-1205-IP-EWP

Läs nedan 📖 manual på svenska för Viking K-1205-IP-EWP (26 sidor) i kategorin Tillträdeskontrollsystem. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/26

Features

Specifications

• Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with

permanent laser etched graphics. Speaker/mic screen. Heavy duty metal keypad

buttons and T-10 Security Torx drive mounting screws.

• Marine grade 316 stainless steel faceplate and screws. Weather Resistant Features:

Keypad internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate,

mic and speaker gaskets.

• Built-in high resolution analog NTSC color video camera with wide viewing angle,

tilt/swivel adjustments and wide operating temperature: -40°F to 140°F

• Two sets of SPDT 2 Amp relay contacts for door/gate or camera control

• Optional for Secure Remote Relay Control, see RC-4A DOD 582

• Blue “Call /Status” LED indicator

• SIP compliant (see page 2 for compatible SIP servers and IP phone systems)

• Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging

• PoE powered (class 2, <6.5 Watts)

• Automatic Noise Canceling (ANC) feature for operation in noisy environments

• Viking’s proprietary VOX switching eliminates the need for “Push to Talk” mode

• Network downloadable firmware

• 26 bit Wiegand input for optional proximity card readers, see and DOD 221 228

• 26 Bit Wiegand output connect to card reader input of an Access Control System

Power: PoE class 2 (<6.5 Watts)

Dimensions: Overall: 5” x 10” x 2.5” (127mm x 254mm x 63.5mm)

Rough-in box: 4.5” x 9.12” x 2.5” (114mm x 232mm x 64mm)

Shipping Weight: K-1205-IP: 4.3 lbs (1.95 kg), K-1205-IP-EWP: 4.5 lbs (2.04 kg)

Operating Temperature: -40°F to 140°F (-40°C to 60°C)

Humidity - Standard Products: 5% to 95% non-condensing

Humidity - EWP Products: Up to 100%

Audio Codecs: G711u, G711a, G722

Network Compliance:

IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over

Regulatory Compliance: CE, FCC Part 15 and Canada ICES-003 Class A

Connections: (1) RJ45 10/100 Base-T, (16) gel-filled butt connectors

See on page 3.Camera Specifications

Installation requires the assistance of a

Network Administrator / IT Technician.

The K-1205-IP is a durable and attractive handsfree phone for apartment and residential door entry

applications requiring a vandal resistant VoIP speaker phone with integrated analog color video camera.

The K-1205-IP phone is designed to provide quick and reliable handsfree communication for SIP VoIP

phone systems or cloud based service providers. The can be programmed from any PC on theK-1205-IP

same LAN or remotely using a Static IP Address. The entry phone can dial up to 12K-1205-IP

programmable numbers and 12 rollover numbers. The brushed stainless steel faceplate has a built-in 12

resident directory with a waterproof, scratch resistant lens and 12 buttons for single push auto-dialing of a

tenant’s phone number or business extension.

When the phone is connected to an apartment or business tenant, a built-in contact closure mayK-1205-IP

be activated to control an electric gate or door strike. Up to 1,000 keyless entry codes may be programmed,

providing tenants with keyless entry. A 26 bit Wiegand input is provided for adding an optional proximity

card reader with capacity to program up to 1,000 card numbers. Keyless entry codes and card numbers

can be programmed to only allow access at specific times and/or day of the week. The includesK-1205-IP

a request for exit (REX) input and also offers event logging with time and date stamp .

The K-1205-IP-EWP K-1205-IP shares all of the features of the in addition to Enhanced Weather Protection

(EWP) for outdoor installations where the unit is exposed to precipitation or condensation. EWP products

are designed to meet IP66 standards and may feature foam rubber gaskets, sealed connections, gel-filled

butt connectors, as well as potted circuit boards. For more information on EWP, see . DOD 859

K-1205-IP

(shown in optional VE-5x10-SS

surface mount box)

• Programmable to speed dial up to 12 numbers

• Cycles to rollover phone number on busy or no-answer

• Program up to 1,000 keyless entry codes and/or proximity card numbers

• Keyless entry codes and proximity card numbers can be programmed to only allow

access at specific times and days of week

• Event logging with time and date stamp

• Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66

Ingress Protection Rating, see DOD 859

• Hangs up on busy signal, time-out or touch tone command

• Remotely programmable

• Extended temperature range -40°F to 140°F

• Programmable volume adjustments for microphone and speaker

• Selectable auto-answer feature for monitoring

• Flush mount with included Zinc plated steel rough-in box,

• Surface mount using an optional surface mount box (not included, see VE-5x10 DOD 424)

• Optional Long Range RFID Receiver, see LRR-4 DOD 226

• Optional kit to illuminate the front panel at night, see VE-LIGHT DOD 428

• Diagnostics for testing microphone, speaker and relays

Vandal Resistant VoIP Entry Phone System with Built-In

Directory, 12 Button Auto Dialer and Analog Video Camera

K-1205-IP

“Brushed 316 Stainless Steel”

(similar to brushed nickel)

• Residential Gate Entrance

• Courtesy Assistance Phone

• Customer Service Phone

• Automated Teller (ATM) Phone

• Door Entry Phone

• Apartment Entry Phone

• Kiosk Phone

Applications

Information: 715-386-8861

www.VikingElectronics.com

PRODUCT

MANUAL

Designed, Manufactured and Supported in the USA

K-1205-IP Series

VoIP Entry Phone System with

12 Button Auto Dialer & Camera

September 28, 2021

SECURITY & COMMUNICATION

VIKING

VoIP SIP System Compatibility

For compatibility and vendor specific detailed configuration instructions, see the Viking VoIP

SIP System Compatibility List, DOD 944. To open and download this PDF file:

1. Go to www.vikingelectronics.com

and enter in the search box 944

2. Click Application Note (DOD 944)

to open and download the PDF

Scan the QR code below to open

and download the Viking VoIP

SIP System Compatibility List - OR -

Important: Exclusion from this list means only that compatibility has not been verified, it does not mean

incompatibility. If you have questions, please call Viking Electronics at 715-386-8861.

Image Sensor: 1/4” color CMOS

Video Output: 1 VP-P composite, NTSC, 75 Ohms

Resolution: 420 lines (640 x 480 @ 30fps / 307,200 pixels)

Sensitivity: 0.025 LUX (50 IRE) F 1.2 3200K

Lens: 2.1mm, conical pinhole

FOV (Field of View): 80° Horizontal, 60° Vertical, 100° Diagonal

Tilt/Swivel Adjustment: Vertical +/- 20°, horizontal +/- 30° (see Diagram A)

IR Compatibility: This camera is equipped with an OLP (Optical Low Pass) filter to maintain

correct video color in outside applications. The standard camera is compatible with IRNOT

illuminators. If IR illumination is required, you will need to replace the existing camera with a Viking

model . For more information, see . VCAM-1IR DOD 190

Maximum Wire Run Length: 1000 ft with *RG59/RG6 for video and CAT5 for power (1 pair) and

entry phone audio (1 pair). 150 ft with CAT5E for video, power and entry phone audio (longer

video runs are possible by using video balun transceivers).

* Note: RG59 or RG6 with solid center conductor and 95% bare copper braid shield.

80° Lens FOV

Rotate

Left 30°

Rotate

Right 30°

Camera Lens

Diagram A

Camera Horizontal Field of View:

Camera Specifications

Definitions

Client: A computer or device that makes use of a server. As an example, the client might request a particular file from the server.

DHCP: Dynamic Host Configuration Protocol. In this procedure the network server or router takes note of a client’s MAC address and assigns an IP address to

allow the client to communicate with other devices on the network.

DNS Server: A DNS (Domain Name System) server translates domain names (ie: www.vikingelectronics.com) into an IP address.

Ethernet: Ethernet is the most commonly used technology. An Ethernet Local Area Network typically uses twisted pair wires to achieve transmission speedsLAN

up to 1Gbps.

Host: A computer or device connected to a network.

Host Name: A host name is a label assigned to a device connected to a computer network that is used to identify the device in various forms of network

communication.

Hosts File: A file stored in a computer that lists host names and their corresponding IP addresses with the purpose of mapping addresses to hosts or vice versa.

Internet: A worldwide system of computer networks running on IP protocol which can be accessed by individual computers or networks.

IP: Internet Protocol is the set of communications conventions that govern the way computers communicate on networks and on the Internet.

IP Address: This is the address that uniquely identifies a host on a network.

LAN: Local Area Network. A LAN is a network connecting computers and other devices within an office or building.

Lease: The amount of time a DHCP server reserves an address it has assigned. If the address isn’t used by the host for a period of time, the lease can expire

and the address can be assigned to another host.

MAC Address: MAC stands for Media Access Control. A MAC address, also called a hardware address or physical address, is a unique address assigned to a

device at the factory. It resides in the device’s memory and is used by routers to send network traffic to the correct IP address. You can find the MAC address of

your phone printed on a white label on the top surface of the PoE LAN port. K-1205-IP

Router: A device that forwards data from one network to another. In order to send information to the right location, routers look at andIP Address MAC Address,

Subnet Mask.

RTP: Real-Time Transport Protocol is an Internet protocol standard that specifies a way for programs to manage the real-time transmission of multimedia data

over either unicast or multicast network services.

Server: A computer or device that fulfills requests from a client. This could involve the server sending a particular file requested by the client.

Session Initiation Protocol (SIP): Is a signaling communications protocol, widely used for controlling multimedia communication sessions such as voice and

video calls over Internet Protocol ( ) networks.IP The protocol defines the messages that are sent between endpoints, which govern establishment, termination and

other essential elements of a call.

Static IP Address: A static IP Address has been assigned manually and is permanent until it is manually removed. It is not subject to the limitations of aLease

Dynamic IP Address assigned by the DHCP Server. The default static IP Address is: 192.168.154.1

Subnet: A portion of a network that shares a common address component. On TCP/IP networks, subnets are defined as all devices whose IP addresses have the

same prefix. For example, all devices with IP addresses that start with 100.100.100. would be part of the same subnet. Dividing a network into subnets is useful

for both security and performance reasons. IP networks are divided using a subnet mask.

TCP/IP: Transmission Control Protocol/Internet Protocol is the suite of communications protocols used to connect hosts on the Internet. TCP/IP uses several

protocols, the two main ones being TCP and IP. TCP/IP is built into the UNIX operating system and is used by the Internet, making it the de facto standard for

transmitting data over networks.

TISP: Telephone Internet Service Provider

WAN: Wide Area Network. A WAN is a network comprising a large geographical area like a state or country. The largest WAN is the Internet.

Wireless Access Point (AP): A device that allows wireless devices to connect to a wired network using Wi-Fi, or related standards. The AP usually connects to

a router (via a wired network) as a standalone device, but it can also be an integral component of the router itself.

Wireless Repeater (Wireless Range Extender): takes an existing signal from a wireless router or access point and rebroadcasts it to create a second network.

When two or more hosts have to be connected with one another over the IEEE 802.11 protocol and the distance is too long for a direct connection to be established,

a wireless repeater is used to bridge the gap.