VTech RM7764HD Bruksanvisning

VTech Babyvakt RM7764HD

Läs nedan 📖 manual på svenska för VTech RM7764HD (2 sidor) i kategorin Babyvakt. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

RM7764HD

7-inch Smart Wi-Fi 1080p

Pan and Tilt Monitor

Go to auphones.vtech.com

to register your product for

warranty support and latest

VTech product news.

Quick start guide

What does HD Video Monitor do?

VTech 7-inch Smart Wi-Fi 1080p Pan and Tilt Monitor allows you to stay close to your baby when

you are on the move or away.

This monitor is Wi-Fi enabled, which uses your home wireless network to stream live video and

audio through the HD baby unit and 7-inch color screen parent unit. It allows you to maintain a

constant connection to your baby.

You can also monitor from your smartphone and mobile tablet.

VTech 7-inch Smart Wi-Fi 1080p Pan and Tilt Monitor uses MyVTech Baby HD app to let you

instantly see and hear what’s happening with your baby from anywhere in the world.

The app can be downloaded from the App Store or the Google PlayTM Store, directly from your

smartphone or mobile tablet.

Congratulations

on purchasing your new VTech product. Before using this HD video monitor, please read

Important safety instructions.

Frequency Baby unit: 2412 - 2462 MHz

Channels 13

LCD 7’’ Color LCD

(IPS 1200x800 pixels)

Nominal effective range Actual operating range may vary according to environmental conditions

at the time of use.

Power requirement 1. Parent unit power adapter:

Output: 5V DC 1000mA

2. Parent unit : 3.7V Lithium-ion battery

Baby unit power adapter:

Output: 5V DC 1000mA

Specifications are subject to change without notice.

Technical speciﬁcations

Android TM and Google Play TM are trademarks of Google Inc.

App Store is a trademark of Apple Inc., registered in the U.S. and other countries.

IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

UL STD.

62368-1

CERTIFIED TO

CSA STD.

C22.2 NO.62368-1

CO ORMS TO NF

Overview

What’s in the box

Connect, charge and power on the baby monitor

Protect your privacy and online security

x 2 x 2

Quick start guide

Your HD video monitor package contains the following items. Save your sales receipt and

original packaging in the event warranty service is necessary.

Parent unit overview

1LINK LED light

• On when the parent unit is linked to the

baby unit.

• Flashes when the link to the baby unit

is lost.

2 LED light

• On when the parent unit is connected to

AC power, and the battery is charging.

• Off when the parent unit is

disconnected from AC power, or when

the parent unit is connected to AC

power and the battery is fully-charged.

• Flashes when the parent unit battery is

low and needs charging.

33- level sound indicator light

• Green on when low sound level is

detected by the baby unit.

• Green and amber on when moderate

sound level is detected by the baby

unit.

• Green, amber and red on when high

sound level is detected by the baby

unit.

4TALK

• Press and hold to talk to the baby unit.

• While in a submenu, press to exit.

• Press to zoom in/out.

6Arrow keys

, , or

• Press to navigate leftward, upward,

rightward or downward, within the

main menu and submenus.

• While viewing image from the

baby unit, press to pan the baby

unit leftward, upward, rightward or

downward.

• While viewing zoomed image, press

to move the zoomed image leftward,

upward, rightward or downward.

7MENU/SELECT

• Press to enter the main menu.

• While in a menu, press to choose an

item, or save a setting.

8- VOL/ VOL +

• Increase or decrease parent unit’s

volume.

9Microphone

10 POWER key

11 Power jack

12 RESET

• Force reboot the parent unit.

13 Antenna

14 Speaker

15 Stand

How the system works

Direct mode

The parent unit and the baby unit of your video monitor connect to each others in Direct mode

by default, which allows you to stream live video right out of the box. connection Direct mode

lets you stream live video from parent unit only.

• You may experience reduced signal strength if your parent unit and baby unit are far apart, or there are

obstructing factors, such as internal walls, between them. Move the parent unit closer to the baby unit to

improve the signal strength. You can also set up Router mode to connect via your home Wi-Fi network to

improve the connection between your parent unit and baby unit.

Router mode

You can continue using your video monitor

with connection, or you Direct mode

can set up your monitor in Router mode

connection.

Router mode uses your home Wi-Fi

network to connect your video monitor.

It supports streaming live video through

parent unit and smartphone app.

We recommend that you set up your

monitor in Router mode to enjoy streaming

live video via your parent unit with better

connection.

If you want to stream live video remotely with your mobile device, download and install the

MyVTech Baby HD mobile app. With the mobile app, your Wi-Fi router (not included) provides

Internet connectivity to your HD video monitor system. It serves as a communicating channel

between your baby unit and mobile device, allowing you to monitor and/or control your baby unit

wherever you are. For detail, see Download app for mobile access section in this quick start guide.

• Your parent unit detects the connection signal strength. If you have connected your video monitor with

your home Wi-Fi network, your parent unit automatically switches to direct or router mode - the one that

has stronger signal strength.

• When both parent unit and app are viewing the camera simultaneously, the video quality will be

optimised to deliver the best possible viewing result.

VTech cares about your privacy and peace of mind. That’s why we’ve put together a list of

industry-recommended best practices to help keep your wireless connection private and

your devices protected when online. We recommend you carefully review and consider

complying with the following tips.

Ensure your wireless connection is secure.

• Before installing a device, ensure your router’s wireless signal is encrypted by selecting

the “WPA2-PSK with AES” setting in your router’s wireless security menu.

Change default settings.

• Change your wireless router’s default wireless network name (SSID) to something unique.

• Change default passwords to unique, strong passwords. A strong password:

- Is at least 10 characters long.

- Is complex.

- Does not contain dictionary words or personal information.

- Contains a mix of uppercase letters, lowercase letters, special characters and numbers.

Keep your devices up to date.

• Download security patches from manufacturers as soon as they become available. This

will ensure you always have the latest security updates.

• If the feature is available, enable automatic updates for future releases.

Disable Universal Plug and Play (UPnP) on your router.

• UPnP enabled on a router can limit the effectiveness of your ﬁrewall by allowing other

network devices to open inbound ports without any intervention or approval from you.

A virus or other malware program could use this function to compromise security for the

entire network.

For more information on wireless connections and protecting your data, please review the

following resources from industry experts:

1. Federal Communications Commission: Wireless Connections and Bluetooth Security Tips

–

www.fcc.gov/consumers/guides/how-protect-yourself-online.

2. U.S. Department of Homeland Security: Before You Connect a New Computer to the

Internet –

www.us-cert.gov/ncas/tips/ST15-003.

3. Federal Trade Commission: Using IP Cameras Safely –

https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-safely.

4. Wi-Fi Alliance: Discover Wi-Fi Security –

http://www.wi-ﬁ.org/discover-wi-ﬁ/security.

Connect the baby monitor

• The rechargeable battery in the parent unit is built-in.

• Use only the power adapters supplied with this product.

• Make sure the parent unit and the baby unit are not connected to the switch controlled electric outlets.

• Connect the power adapters in a vertical or ﬂoor mount position only. The adapters’ prongs are not

designed to hold the weight of the parent unit and the baby unit, so do not connect them to any ceiling,

under-the-table, or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets.

• Make sure the parent unit, the baby unit and the power adapter cords are out of reach of children.

Charge the parent unit battery

The parent unit runs on rechargeable battery or AC power. To continuously monitor your

baby, keep the parent unit connected to AC power. With the battery alone, the parent unit can

cordlessly run for a short time only.

Slide the switch to ON to power on your baby unit.

• When powering up, the baby unit’s status LED turns on. It will turn

off after a while and keeps off.

• The status LED is set to off by default. If you want to keep the LED

on, press MENU, then go to

> and turn it on.Status LED

Raise the parent unit antenna for better reception

Charge the battery before use

• The parent unit is fully charged after 8 hours of continuous charging.

• The standby time varies depending on your actual use.

After the parent unit is fully charged, press until the welcoming screen appears.POWER

The battery icon indicates the battery status (see the following table).

Battery indicators Battery status Action

The screen displays and

. The light ﬂashes.

The battery has very little

charge and may be used

for only a short time.

Charge

without interruption

(about

30 minutes).

The battery icon becomes

solid .

The battery is fully

charged.

To keep the battery charged, connect

it to AC power when not in use.

Parent unit icons

Local access

Mobile access Remote access

Basic operation

Talk to your baby via the baby unit

1. Press and hold the TALK key.

2. When the icon displays on

screen, speak to your parent unit.

Your voice is transmitted to the

baby unit.

3. When ﬁnish talking, release

the key and hear your baby TALK

again.

Turn on/off baby unit's status LED

You may set the status LED indicator of your baby

unit on or off. Go to

> .Status LED

Zoom

Press to zoom in or out.

Adjust speaker volume

Press / to adjust your parent unit -VOL VOL+

speaker volume. It determines the volume of

sound transmitted from your baby unit.

After powering up your video monitor, the parent unit streams live video in direct mode.

We recommend you follow the instructions on screen to set up home Wi-Fi network

with your monitor for functionality enhancements and mobile access. See Auto software

and ﬁrmware update Download app for mobile access and in this quick start guide.

Use the menu

Press on the parent unit to enter the MENU

main menu, choose a menu item, or save a

setting. You can use the parent unit menu

for advanced settings or operations, such as

to play or stop lullaby, or adjust the motion

and sound detection settings.

While in the menu:

• Press , , or to scroll among the

menu options.

• Press to select an item.SELECT

• Press TALK to return to the live video.

• Press to go to the Help & info page.

You can reset the parent unit by pressing the

RESET key at the back of the unit.

Use a pin and insert it into the hole on the

back of the parent unit, and then press the

button inside.

Turn on/off the parent unit screen

You can turn on or off the parent unit screen

without powering off the parent unit. You

can still hear sound from the baby unit.

• Press POWER on the parent unit to turn

off the screen.

• Press any keys on the parent unit to turn

on the screen again.

Muted

1Light sensor

2Camera lens

3Microphone

4Infrared LEDs

• Allow you to see clearly in a dark

surrounding.

5LED indicator

• Orange is steady on when the baby unit

is connecting to the parent unit in direct

mode.

• Green is steady on when the baby unit

and parent unit are connecting to your

home Wi-Fi network via the Wi-Fi router.

• Flashes orange slowly during video

streaming in direct mode.

• Flashes green slowly during video

streaming via home Wi-Fi network.

6ON

• Power on/off switch.

7Speaker

8Power jack

9Temperature sensor

10 Slots for wall mounting

• Wall mount bracket is included in your

package.

11 PAIR

• Press and hold for three seconds to

enter pairing mode.

• Reset the baby unit to factory default.

1. Press and hold PAIR key until you

hear a beep sound.

2. Release the PAIR key, and then

press the PAIR key again ﬁve times

until you hear another beep sound.

3. The baby unit will sound another

beep when the reset completes.

Then, the baby unit will reboot.

Baby unit overview

Power on

Power o

Press and hold

For mobile access:

MyVTech Baby HD mobile app

Network Wi-Fi

Wi-Fi router 2.4GHz 802.11 b/g/n

Internet connection 1.5 Mbps @ 720p or 2.5 Mbps @1080p upload

bandwidth per baby unit

Requirements

Main

Menu Options

Monitoring mode

(* For pairing with only)RM724HD

• View baby unit 1 or 2 in Single

mode.

• View both baby units in Patrol

mode.

• View both baby units in Split

screen.

Melodies and soothing sounds

• Select play all melodies, or play

one of the ﬁve melodies and

four soothing sounds.

• You can also set the timer to

stop playing after 15, 30 or 60

minutes, or playing non-stop.

Alerts - Sound, motion and temperature

• Select the sound and motion

sensitivity level.

• Turn on/off sound and motion

detection alerts.

• Select maximum and minimum

temperature for alert range.

• Turn on/off temperature alert.

• Turn on/off Auto Wake Up

function.

• Turn on/off Motion Tracking.

Parent unit settings

• Adjust parent unit screen

brightness.

• Turn on/off dim mode.

Baby unit settings

• Turn on/off .Night Vision

• Turn on/off baby unit’s status LED.

• Adjust baby unit’s speaker

volume.

• Update baby unit’s security key.

Main

Menu Options

General settings

• Connect to home Wi-Fi network.

• Turn on/off Parent unit Wi-Fi

Connection.

• Connect mobile phone.

• Turn on/off Low Battery Tone.

• Turn on/off .No Link Alert

• Add/remove baby unit.

NOTE:

Camera lens and surface may get

warm during normal operation.

WARM

Status icons

Direct mode

Parent unit, baby unit 1 and baby unit 2

(*For pairing with RM724HD only) are

connected to each others directly.

Router mode

Parent unit, baby unit 1 and baby unit 2

(*For pairing with RM724HD only) are

connected to home Wi-Fi network.

Baby unit 1 and 2 are being viewed in

Patrol mode (For pairing with RM724HD

only).

Baby unit 1 and 2 are being viewed in

Split mode (For pairing with RM724HD

only).

Night vision is turned on.

Motion tracking is turned on.

Motion alert is turned on.

Sound alert is turned on.

Melodies and soothing sounds are

turned on.

Parent unit speaker is muted.

Temperature alert is turned on.

Install MyVTech Baby HD mobile app

1. Browse the App Store or the Google Play store .

2. Search for the mobile app with the keyword “myvtech baby hd“.

3. Download and install the MyVTech Baby HD mobile app to your mobile device.

Scan the QR codes on the right to get the app.

• Make sure your mobile device meets the

minimum requirement for the mobile app.

Minimum requirement

The mobile app is compatible with:

• AndroidTM 5.0 or later; and

• iOS 8.0 or later.

IMPORTANT

Please retain this booklet with your sales receipt as proof of the date of purchase.

Customer Service

If you require assistance in operating this product, please call the TecHelp Information Line on

1300 369 193 or contact VTech by e-mail at: tcpsupport_au@vtech.com.

Voluntary Product Enquiry

In addition to your Statutory Rights and subject to the conditions below, VTech warrants that this product will be

free from any defect in materials or workmanship under conditions of normal use for a period of 24 months from

date of purchase.

VTech does not warrant that the product will be free from defects if defects are caused by an accident, misuse,

abuse, improper installation or operation, vermin infestations, lack of reasonable care, unauthorised modiﬁcation,

loss of parts, tampering or attempted repair by a person not authorised by VTech; or where the product has been

damaged by lightning or a mains power surge.To make a claim under this Voluntary Product Warranty you must

call the TecHelp Information Line on 1300 369 193 or contact VTech by e-mail at: tcpsupport_au@vtech.com where

a Customer Service Representative will inform you of the product return process. You will need to ensure that:

• You provide proof of purchase;

• Your product is suitably packaged (original packaging is not required); and

• You have included all components from the original purchase.

For your records

Date of purchase:

Place of purchase:

Serial number:

For Voluntary Product Warranty purposes, proof of purchase is required so please keep your receipt.

The beneﬁts conferred by this Voluntary Product Warranty are in addition to other rights and remedies that are

available to you under law, which cannot be excluded. The processes for this Voluntary Product Warranty in no way

limit your rights which arise as a result of your Statutory Rights.

This Voluntary Product Warranty is given by:

VTech Telecommunications (Australia) Pty Ltd ABN 70 136 672 627

Address: 24 Gilby Road, Mount Waverley 3149

IMPORTANT NOTE: THIS IS NOT A PRODUCT RETURN OR SERVICE ADDRESS – PLEASE CONTACT TECHELP BY

PHONE OR EMAIL FOR PRODUCT AND WARRANTY SUPPORT. NO LIABILITY WILL BE ACCEPTED BY VTECH FOR

PRODUCTS RETURNED TO THIS ADDRESS UNDER THIS VOLUNTARY PRODUCT WARRANTY.

Phone number: 1300 369 193

Email address: tcpsupport_au@vtech.com

Statutory Rights

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled

to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or

damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality

and the failure does not amount to a major failure.

To keep this product working well and looking good, follow these guidelines:

• Avoid putting it near heating appliances and devices that generate electrical noise (for example,

motors or ﬂuorescent lamps).

• DO NOT expose it to direct sunlight or moisture.

• Avoid dropping the product or treating it roughly.

• Clean with a soft cloth.

• DO NOT immerse the parent unit and the baby unit in water and do not clean them under the tap.

• DO NOT use cleaning spray or liquid cleaners.

• Make sure the parent unit and the baby unit are dry before you connect them to the mains again.

When you are not going to use the HD video monitor for some time, store the parent unit, the baby

unit and the adapters in a cool and dry place.

Below are the questions most frequently asked about the HD video monitor.

Can I turn off the

parent unit screen but

keep hearing sound

from the baby unit?

The parent unit’s LCD display will dim automatically after being inactive for some

time. Press MENU/SELECT will turn the LCD display back on.

Why does the baby

unit not respond

normally?

Try the following (in the order listed) for common cure:

1. Disconnect the power to the baby unit.

2. Wait a few minutes before connecting power back to the baby unit.

3. Reboot the parent unit.

Why is my screen in

black and white?

The baby unit has a light sensor that measures the ambient light. When the

ambient light is dim, such as during nighttime or in a dark room, the baby unit

activates its infrared LEDs, and the parent unit displays the live video in black

and white.

Why does my baby

unit show ofﬂine? Why

is the connection lost

every now and then?

The baby unit may lose the Internet connection. Check your network and the

router setting.

Other electronic products may cause interference with your baby unit. Try

installing your baby unit as far away from these electronic devices as possible.

Why don’t I hear a

sound/Why can’t I

hear my baby cry?

The parent unit speaker volume may be too low. Press VOL + to increase the

volume.

You may have set a low sound sensitivity level. Set the sound sensitivity to a

higher level.

Frequently asked questions

General product care

Storage

Customer service and product warranty

mount the baby unit (optional)

Need help?

You can download the free MyVTech Baby HD mobile app and install it

to a mobile device, then use your mobile device and the mobile app to

monitor your areas remotely.

1. when the parent unit is idle.Press MENU

2. Go to > Connect Mobile Phone.

3. Scan the QR code in the parent unit to download the app into your

mobile device.

4. Follow the instructions in the mobile app to set up and pair your baby

unit to the mobile app.

Alternatively, you can download the mobile app from the App Store or

Google Play store.

Download app for mobile access

After installing the mobile app, follow the instructions in the mobile app and parent

unit to set up and pair your baby unit.

In your mobile device:

1. to run the mobile app in your mobile device, and then create an account.Tap

2. We recommend that you use common webmail services, such as Google Gmail for

registration of your mobile app account. Check your email (and Spam folder), and

activate your new account via the email link, then sign in to your account.

3. Follow the instructions in the mobile app to pair the baby unit. Tap + in the mobile app

to get started.

Test the sound level and position the HD video monitor

3. To avoid causing high-pitched screeching noise from your HD video monitor:

• Make sure your baby unit and parent unit are more than 3 metres apart; OR

• Turn down the volume of your parent unit.

• This HD video monitor is intended as an aid. It is not a substitute for proper adult supervision, and should

not be used as such.

Testing the sound level of the HD video monitor

• For hearing protection, make sure the parent unit is more than 3 metres away from the baby

unit. If you hear any high-pitched noise from the parent unit, move the parent unit further

until the noise stops. You can also press - VOL on the parent unit to lower or mute the noise.

• Increase the parent unit speaker volume if you cannot hear the sounds transmitted from the baby unit.

Positioning the monitorHD video

• Keep the baby unit out of the reach of your baby. Never

place or mount the baby unit inside the baby’s crib or

playpen.

1. Place the baby unit more than 1 metre away from

your baby.

2. Adjust the angle of the baby unit to aim at your baby. Refer

to the online help topics on how to use the Pan/tilt and

Zoom functions of the baby unit.

To ensure that your HD video monitor is always at its best performance, the parent unit

will prompt a message and ask you to update its software and the baby unit's ﬁrmware

when there are new versions available.

• Follow the instructions on the parent unit screen to update your HD video monitor.

If you skip the updates, the parent unit and baby unit will be updated automatically

when the parent unit is powered off, and then powered on again.

Connect your HD video monitor with home Wi-Fi network

• You must connect your video monitor to your secured home Wi-Fi network in order

to receive the latest software and ﬁrmware updates. To set it up, go to

> .Conﬁgure Wi-Fi

Auto software and ﬁrmware update

If you plan to install your baby unit in a designated

location, and use your home Wi-Fi network to

connect your video monitor, you need to test

which of your selected monitoring areas within the

house have good Wi-Fi signal strength. After you

have powered on your parent unit, you can use

your parent unit’s Wi-Fi signal strength indicator

to assist in checking. Once you have identiﬁed the

suitable location, you can install your baby unit.

Adjust the distance between your baby unit and

the Wi-Fi router if needed.

• Depending on surroundings and obstructing

factors, such as the effect distance and internal

walls have on signal strength, you may experience

reduced Wi-Fi signal. To improve the Wi-Fi signal

strength, adjust the distance or direction of your

parent unit. Check with your parent unit again.

test the location for the baby unit

The crossed-out wheelie bin symbols on products and batteries, or on their respective

packaging, indicates they must not be disposed of in domestic waste as they contain

substances that can be damaging to the environment and human health.

The chemical symbols Hg, Cd or Pb, where marked, indicate that the battery contains more

than the speciﬁed value of mercury (Hg), cadmium (Cd) or lead (Pn) set out in Battery Directive

(2006/66/EC).

The solid bar indicates that the product was placed on the market after 13th August, 2005.

Help protect the environment by disposing of your product or batteries responsibly.

Disposal of batteries and product

The applied nameplate is located at the bottom of the baby unit’s base.

When using your equipment, basic safety precautions should always be followed to reduce the risk of ﬁre,

electric shock and injury, including the following:

1. Follow all warnings and instructions marked on the product.

2. Adult setup is required.

3. CAUTION: Do not install the baby unit at a height above 2 metres.

4. This product is not a substitute for adult supervision of the infant. Supervising the infant is the parent’s or

caregiver’s responsibility. This product could cease operating, and therefore you should not assume it will

continue working properly for any given period of time. Further, this is not a medical device and should not

be used as such. This product is intended to assist you in supervising your baby.

5. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink,

laundry tub or swimming pool, or in a wet basement or shower.

6. CAUTION: Use only the battery provided. There may be a risk of explosion if a wrong type of battery is

used for the parent unit. The battery cannot be subjected to high or low extreme temperature and low

air pressure at high altitude during use, storage or transportation. Disposal of battery into ﬁre or a hot

oven, or mechanically crushing or cutting or the battery can result in an explosion. Leaving the battery

in an extremely high temperature surrounding environment can result in an explosion or the leakage of

ﬂammable liquid of gas. Battery subjected to extremely low air pressure may result in an explosion or the

leakage of ﬂammable liquid or gas.

7. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage

the product.

Parent unit power adapter:

Output: 5V DC 1000mA;

Baby unit power adapter:

Output: 5V DC 1000mA.

8. The power adapter is intended to be correctly oriented in a vertical or ﬂoor mount position. The prongs are

not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.

9. For pluggable equipment, the socket-outlet (power adapter) shall be installed near the equipment and shall

be easily accessible.

10. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp

cloth for cleaning.

11. Do not cut off the power adapters to replace them with other plugs, as this causes a hazardous situation.

12. Do not allow anything to rest on the power cords. Do not install this product where the cords may be

walked on or crimped.

13. This product should be operated only from the type of power source indicated on the marking label. If you

are not sure of the type of power supply in your home, consult your dealer or local power company.

14. The equipment is to be supplied from an identiﬁed USB port complying with the requirements of Limited

Power Source.

15. Do not overload wall outlets or use an extension cord.

16. Do not place this product on an unstable table, shelf, stand or other unstable surfaces.

17. This product should not be placed in any area where proper ventilation is not provided. Slots and openings

in the back or bottom of this product are provided for ventilation. To protect them from overheating, these

openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This

product should never be placed near or over a radiator or heat register.

18. Never push objects of any kind into this product through the slots because they may touch dangerous

voltage points or create a short circuit. Never spill liquid of any kind on the product.

19. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service

facility. Opening or removing parts of the product other than speciﬁed access doors may expose you to

dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is

subsequently used.

20. You should test the sound reception every time you turn on the units or move one of the components.

21. Periodically examine all components for damage.

22. Be aware of possible loss of privacy while using public airwaves. Conversations may be picked up by other

nursery monitors, cordless phones, scanners, etc.

23. Children should be supervised to ensure that they do not play with the product.

24. The small parts of this monitor can be swallowed by babies or small children. Keep these parts out of reach

of children.

25. The product is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for their safety.

SAVE THESE INSTRUCTIONS

Cautions

• Use and store the product at a temperature between 0oC and 40oC.

• Burn hazard, ﬁre hazard, explosion hazard associated with mishandling of the battery.

• Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a

heating source.

• Warning—Strangulation Hazard—Children have STRANGLED in cords. Keep this cord out of the

reach of children (more than 3 ft (0.9m) away). Do not remove this tag.

• Never place the baby unit(s) inside the baby’s crib or playpen. Never cover the baby unit(s) or

parent unit with anything such as a towel or a blanket.

• Other electronic products may cause interference with your baby unit. Try installing your baby unit as far

away from these electronic devices as possible: radios, cellular telephones, intercoms, room monitors,

televisions, personal computers, kitchen appliances and cordless telephones.

Precautions for users of implanted cardiac pacemakers

Cardiac pacemakers (applies only to digital cordless devices):

Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of

the interference between portable wireless devices and implanted cardiac pacemakers. Supported by the U.S.

Food and Drug Administration, WTR recommends to physicians that:

Pacemaker patients

• Should keep wireless devices at least six inches from the pacemaker.

• Should NOT place wireless devices directly over the pacemaker, such as in a breast pocket, when it is turned

ON.

WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless

devices.

Electromagnetic ﬁelds (EMF)

This VTech product complies with all standards regarding electromagnetic ﬁelds (EMF). If handled properly

and according to the instructions in this user’s manual, the product is safe to be used based on scientiﬁc

evidence available today.

Important safety instructions

> 3m

10:25

> 3ft (1m)

< m3

> 3m

1. Place the wall mount bracket on a

wall and then use a pencil to mark

two holes in parallel. Remove the

wall mount bracket and drill two

holes in the wall (7/32 inch drill bit).

Notes

• Check for reception strength and baby

unit angle before drilling the holes.

• The types of screws and anchors you

need depend on the composition of

the wall. You may need to purchase the

screws and anchors separately to mount

your baby units.

2. If you drill the holes into a stud, go

to step 3.

• If you drill the holes into an

object other than a stud, insert

the wall anchors into the holes.

Tap gently on the ends with a

hammer until the wall anchors

are ﬂush with the wall.

3. Align the wall mount bracket and screws with

the holes in the wall as shown. Tighten the screw

in the middle hole ﬁrst, so that the wall mount

bracket position is ﬁxed. You can tighten the

other screw in the top hole.

3. Insert the screws into the holes and

tighten the screws until only 1/4 inch of

the screws are exposed.

4. Place the baby unit on the wall

mount bracket, and then slide it

forward until it locks into place. Align

the holes on the wall mount bracket

with the screws on the wall, and slide

the wall mount bracket down until it

locks into place.

5. You can maximize your baby unit’s viewing angles by tilting the wall mount bracket.

Hold the baby unit, and then rotate the knob in anticlockwise direction. This will loosen the joint of the wall mount bracket.

Tilt your baby unit up or down to adjust to your preferred angle. Then, rotate the knob in clockwise direction to tighten the joint

and secure the angle.

4. Place the baby unit on the wall mount bracket,

and then slide it forward until it locks into place.

Connect the power adapter to the baby unit

and a power supply not controlled by a wall

switch.

Use your smartphone or mobile device to access our online help.

1. Go to https://auphones.vtech.com/help/support; OR

Scan the QR code on the right. Launch the camera app or

QR code scanner app on your smartphone or tablet. Hold

the device’s camera up to the QR code and frame it. Tap

the notiﬁcation to trigger the redirection of the online help.

- If the QR code is not clearly displayed, adjust your

camera’s focus by moving your device closer or

further away until it is clear.

2. Search for the model - RM7764HD.

If you would like to contact us, visit

https://auphones.vtech.com/help/cs or scan the QR code.

Driven by system updates, the software, online help topics, and online

FAQs will be updated periodically.

For operations and guides to help you using your HD video monitor,

and for latest information and supports, go and check the online help

topics and online FAQs.

You can also call our Customer Support at 1300 369 193.

Online help and support

Produktspecifikationer

Varumärke:	VTech
Kategori:	Babyvakt
Modell:	RM7764HD

Behöver du hjälp?

Om du behöver hjälp med VTech RM7764HD ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Babyvakt VTech Manualer

VTech Clear Sounds Deluxe Bruksanvisning

2 Oktober 2024

VTech RM5766HD Bruksanvisning

19 September 2024

VTech Safe & Sound VM343 Bruksanvisning

15 September 2024

VTech DM1111 Bruksanvisning

22 Augusti 2024

VTech Peppa Pig Bruksanvisning

20 Augusti 2024

VTech RM7764HD Bruksanvisning

7 Augusti 2024

VTech BM1000 Bruksanvisning

6 Augusti 2024

VTech VM333-2 Bruksanvisning

6 Augusti 2024

VTech DM221 Bruksanvisning

4 Augusti 2024

VTech VM303 Bruksanvisning

26 Juli 2024

Babyvakt Manualer

Nyaste Babyvakt Manualer

Oricom Secure 860 Bruksanvisning

27 Oktober 2024

D-Link DCS-855L Bruksanvisning

23 Oktober 2024

Angelcare AC310 Bruksanvisning

22 Oktober 2024

Alecto DVM2028C Bruksanvisning

21 Oktober 2024

Oricom WBS01 Bruksanvisning

21 Oktober 2024

Alecto DVM2043C Bruksanvisning

21 Oktober 2024

Angelcare AC401 Bruksanvisning

20 Oktober 2024

Lionelo line Go Bruksanvisning

20 Oktober 2024

Uniden BW 140R Bruksanvisning

19 Oktober 2024

Alecto SMARTBABY5 Bruksanvisning

18 Oktober 2024