VTech VC7100 Bruksanvisning

VTech Telefon VC7100

Läs nedan 📖 manual på svenska för VTech VC7100 (4 sidor) i kategorin Telefon. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/4

Congratulations

on purchasing your new VTech product.

Before using this product, please read

Important safety instructions.

This manual has instructions on how to

set up and register your new handset. For

instructions on using the handset, see the

Abridged user’s manual that came with your

telephone base.

You may also view or download the online

User’s manual for a full set of installation and

operation instructions at

www.vtechphones.com. In Canada, visit

www.vtechcanada.com.

What’s in the box

Your product package contains the following

items. Save your sales receipt and original

packaging in the event warranty service is

necessary.

Install the battery

Install the battery as shown below.

NOTES

Use only supplied battery.

If the handset will not be used for a long time,

disconnect and remove the battery to prevent

possible leakage.

To purchase a replacement battery, visit our

website at or call www.vtechphones.com

1 (800) 595-9511. In Canada, go to

www.vtechcanada.com or call

1 (800) 267-7377.

•

Connect

Connect the charger

NOTES

Use only the adapters provided.

The adapters are intended for a vertical or ﬂoor

mount position. The prongs are not designed to

hold the plug in place if it is plugged into a ceiling,

under-the-table, or cabinet outlet.

Once you have installed the battery, the

battery indicators show the battery status

(see the following table).

NOTES

For best performance, keep the handset in the

charger when not in use.

The battery is fully charged after 12 hours of

continuous charging.

•

The following table summarizes the battery

charge indicators and actions to take.

Battery

indicators

Battery status Action

The screen

is blank, or

shows Place

in charger

and

ﬂashes.

The battery

has no charge

or very little

charge. The

handset cannot

be used.

Charge without

interruption

(at least

30 minutes).

The screen

shows Low

battery and

ﬂashes.

The battery has

enough charge

to be used for a

short time.

Charge without

interruption

(at least

30 minutes).

The screen

shows

HANDSET X.

The battery is

charged.

To keep the

battery charged,

place it in the

telephone base

or charger when

not in use.

Before use

Add and register a handset

You can add new cordless handset VC7100

to your telephone system, Your VC7151

telephone system supports a maximum of

ﬁve handsets.

base before use. After charged, each

expansion handset alternately displays

To register HS, see manual..

Charge the handset for at least 30 minutes

before registering it to the telephone base.

To register a handset:

Place the new/non-registered handset

in the telephone base. The handset and

telephone base show Registering... Please

wait.

The handset and telephone base show

HANDSET X registered and you hear a beep

when the registration process completes. The

registration process takes about 90 seconds to

complete.

•

Deregister all devices

To replace a handset or reassign the

designated handset number of a registered

handset, you must deregister all devices and

then individually register each handset.

To deregister all devices:

Press and hold on the /FIND HANDSET

telephone base for about 10 seconds,

when the telephone base shows

Deregister all devices?.

Press or press YES /FIND HANDSET

again within 2 seconds.

The telephone base shows Deregistered all

devices To register HS, . All handsets show

see manual. when the deregistration process

completes. The deregistration process takes

about 10 seconds to complete.

Check for dial tone:

Press or on the handset or on the

telephone base. If you hear a dial tone, the

installation is successful.

If you do not hear a dial tone:

Make sure the installation procedures

described above are properly done.

It may be a wiring problem. If you have

changed your telephone service to digital

service from a cable company or a VoIP

service provider, the telephone line may

need to be rewired to allow all existing

telephone jacks to work. Contact your

cable/VoIP service provider for more

information.

Operating range

This cordless telephone operates with the

maximum power allowed by the Federal

Communications Commission (FCC). Even

so, this handset and telephone base can

communicate over only a certain distance -

which can vary with the locations of the

telephone base and handset, the weather, and

the layout of your home or ofﬁce.

When the handset is out of range, the handset

displays Out of range OR no power at

base Put HS on base to power base and

alternately.

•

Go to www.vtechphones.com

to register your product for

enhanced warranty support and

the latest VTech product news.

Telephones identiﬁed with this

logo have reduced noise and

interference when used with

most T-coil equipped hearing

aids and cochlear implants.

The TIA-1083 Compliant

Logo is a trademark of the

Telecommunications Industry

Association. Used under license.

Compatible with

Hearing Aid T-Coil

TIA-1083

VC7100

DECT 6.0 accessory handset

for use with

VTech models VC7151/VC7152

User’s manual

If there is a call while the handset is out of

range, it may not ring, or if it does ring, the call

may not connect well when you press or .

Move closer to the telephone base, and then

press or to answer the call. If the handset

moves out of range during a telephone

conversation, there may be interference. To

improve reception, move closer to the

telephone base.

Handset overview

1 – CHARGE light

2 – LCD display

3 – Right Soft key

• Press to review the sensor status when

the phone is not in use.

• While in a menu, press to select a

menu item; or save an entry or setting.

Left Soft key

• Press to enter the sensor mode menu

when the phone is not in use.

• Press to return to the previous menu.

4 – REDIAL/PAUSE

• Press repeatedly to review the redial list.

• Press and hold to insert a dialing pause

while entering a number.

5 – /TALK/FLASH

• Make or answer a call.

• Press to put the current call on hold

when you receive an incoming call.

• Answer an incoming call when you hear

a call waiting alert.

6 – Dialing keys

• Press to enter numbers or characters.

• Press repeatedly to add or remove 1

in front of the caller ID log entry before

dialing or saving it to the phonebook.

• Press and hold to set or dial your

voicemail number.

• While you have set the dial mode to

pulse and on a call, press to switch to

tone dialing temporarily.

• Press to add a space when entering

names.

• Press and hold to enter quiet mode

setting menu.

• Press repeatedly to show other dialing

options when reviewing a caller ID log

entry.

7 –

• Make or answer a call using the

handset speakerphone.

• During a call, press to switch between

the speakerphone and the earpiece.

8 – MUTE/DELETE

• Mute the microphone during a call.

• While editing names or numbers,

press to delete a digit or character, or

press and hold to delete all digits or

characters.

• Delete the playing message on the

handset.

• Silence the ringer temporarily while the

handset is ringing.

9 – Earpiece

10 – PUSH TO TALK

• Press to display the PUSH TO TALK

(PTT) menu to begin a PTT call when

the phone is not in use.

• Press and hold to begin a one-to-group

PTT call.

• Press and hold while talking in a PTT

call.

11 – MENU/SELECT

• While in a menu, press to select an

item; or save an entry or setting.

12 – VOLUME/ /

• Review the phonebook when the phone

is not in use.

• Increase the listening volume during a

call or message playback.

• Scroll up while in a menu, or in the

phonebook, caller ID log, or redial list.

• Move the cursor to the right when

entering numbers or names.

VOLUME/ /CID

• Review the caller ID log when the

phone is not in use.

• Decrease the listening volume during a

call or message playback.

• Scroll down while in a menu, or in the

phonebook,

caller ID log, or redial list.

• Move the cursor to the left when

entering numbers or names.

13 – OFF/CANCEL

• Hang up a call.

• Silence the ringer temporarily while the

handset is ringing.

•

Press and hold to erase the missed call

indicator while the phone is not in use.

• Press to return to the previous menu, or

press and hold to return to idle mode,

without making changes.

14 – ARM/DISARM

• Press to turn on or off the sensor alert

system.

15 – Microphone

Charger overview

1 – Charging pole

ECO mode

This power conserving technology reduces

power consumption for optimal battery

performance. The ECO mode activates

automatically whenever the handset is

synchronized with the telephone base.

General product care

Taking care of your telephone

Your cordless telephone contains sophisticated

electronic parts, so it must be treated with care.

Avoid rough treatment

Place the handset down gently. Save the

original packing materials to protect your

telephone if you ever need to ship it.

Avoid water

Your telephone can be damaged if it gets wet.

Do not use the handset outdoors in the rain,

or handle it with wet hands. Do not install the

telephone base near a sink, bathtub or shower.

Electrical storms

Electrical storms can sometimes cause power

surges harmful to electronic equipment. For

your own safety, take caution when using

electrical appliances during storms.

Cleaning your telephone

Your telephone has a durable plastic casing

that should retain its luster for many years.

Clean it only with a dry non-abrasive cloth. Do

not use dampened cloth or cleaning solvents of

any kind.

Storage

When you are not going to use the handset for

some time, remove the rechargeable battery

from the handset. Store the handset, the

charger and the adapter in a cool and dry place.

Important safety instructions

When using your telephone equipment, basic

safety precautions should always be followed

to reduce the risk of ﬁre, electric shock and

injury, including the following:

Read and understand all instructions.

Follow all warnings and instructions

marked on the product.

Unplug this product from the wall outlet

before cleaning. Do not use liquid or

aerosol cleaners. Use a dry non-abrasive

cloth for cleaning.

Do not use this product near water such as

near a bath tub, wash bowl, kitchen sink,

laundry tub or a swimming pool, or in a wet

basement or shower.

Do not place this product on an unstable

table, shelf, stand or other unstable surfaces.

Slots and openings in the back or bottom

of the telephone base and handset are

provided for ventilation. To protect them

from overheating, these openings must

not be blocked by placing the product on

a soft surface such as a bed, sofa or rug.

This product should never be placed near

or over a radiator or heat register. This

product should not be placed in any area

where proper ventilation is not provided.

This product should be operated only from

the type of power source indicated on

the marking label. If you are not sure of

the type of power supply in your home or

ofﬁce, consult your dealer or local power

company.

Do not allow anything to rest on the power

cord. Do not install this product where the

cord may be walked on.

Never push objects of any kind into this

product through the slots in the telephone

base or handset because they may touch

dangerous voltage points or create a short

circuit. Never spill liquid of any kind on the

product.

To reduce the risk of electric shock, do

not disassemble this product, but take it to

an authorized service facility. Opening or

removing parts of the telephone base or

handset other than speciﬁed access doors

may expose you to dangerous voltages

or other risks. Incorrect reassembling can

cause electric shock when the product is

subsequently used.

Do not overload wall outlets and extension

cords.

12. Unplug this product from the wall outlet

and refer servicing to an authorized service

facility under the following conditions:

When the power supply cord or plug is

damaged or frayed.

If liquid has been spilled onto the product.

If the product has been exposed to rain

or water.

If the product does not operate normally

by following the operating instructions.

Adjust only those controls that are

covered by the operation instructions.

Improper adjustment of other controls

may result in damage and often requires

extensive work by an authorized

technician to restore the product to

normal operation.

If the product has been dropped and the

telephone base and/or handset has been

damaged.

If the product exhibits a distinct change in

performance.

Avoid using a telephone (other than

cordless) during an electrical storm. There

is a remote risk of electric shock from

lightning.

Do not use the telephone to report a

gas leak in the vicinity of the leak. Under

certain circumstances, a spark may be

created when the adapter is plugged into

the wall outlet, or when the handset is

replaced in its cradle. This is a common

event associated with the closing of any

electrical circuit. The user should not plug

the phone into a wall outlet, and should

not put a charged handset into the cradle,

if the phone is located in an environment

containing concentrations of ﬂammable

or ﬂame-supporting gases, unless there

is adequate ventilation. A spark in such

an environment could create a ﬁre or

explosion. Such environments might

include: medical use of oxygen without

10.

11.

•

13.

14.

adequate ventilation; industrial gases

(cleaning solvents; gasoline vapors; etc.);

a leak of natural gas; etc.

Only put the handset of your telephone next

to your ear when it is in normal talk mode.

The power adapter is intended to be

correctly oriented in a vertical or ﬂoor

mount position. The prongs are not

designed to hold the plug in place if it is

plugged into a ceiling, under-the-table or

cabinet outlet.

Use only the adapters included with this

product. Incorrect adapter polarity or

voltage can seriously damage the product.

LPS or Class 2 Charger adapter: Input

100-240V AC 150mA 50/60Hz; Output: 6V

DC 400mA.

SAVE THESE INSTRUCTIONS

Battery

CAUTION: Use only the batteries indicated

in this manual. There may be a risk of

explosion if a wrong type of battery is used

for the handset. Use only the supplied

rechargeable battery or replacement battery

pack (BT183342/BT283342) for the handset.

Do not dispose of batteries in a ﬁre. They

may explode. Dispose of used battery

according to the information in The RBRC®

seal.

Do not dispose of the battery in a ﬁre. Check

with local waste management codes for

special disposal instructions.

Do not open or mutilate the battery.

Released electrolyte is corrosive and may

cause burns or injury to the eyes or skin.

The electrolyte may be toxic if swallowed.

Exercise care in handling batteries in order

not to create a short circuit with conductive

materials.

Charge the battery provided with or

identiﬁed for use with this product only

in accordance with the instructions and

limitations speciﬁed in this manual.

Precautions for users of implanted

cardiac pacemakers

Cardiac pacemakers (applies only to digital

cordless telephones):

Wireless Technology Research, LLC (WTR),

an independent research entity, led a

multidisciplinary evaluation of the interference

between portable wireless telephones and

15.

16.

17.

•

implanted cardiac pacemakers. Supported by

the U.S. Food and Drug Administration, WTR

recommends to physicians that:

Pacemaker patients

Should keep wireless telephones at least six

inches from the pacemaker.

Should NOT place wireless telephones

directly over the pacemaker, such as in a

breast pocket, when it is turned ON.

Should use the wireless telephone at the ear

opposite the pacemaker.

WTR’s evaluation did not identify any risk

to bystanders with pacemakers from other

persons using wireless telephones.

About cordless telephones

Privacy: The same features that make a

cordless telephone convenient create some

limitations. Telephone calls are transmitted

between the telephone base and the

cordless handset by radio waves, so there

is a possibility that the cordless telephone

conversations could be intercepted by

radio receiving equipment within range

of the cordless handset. For this reason,

you should not think of cordless telephone

conversations as being as private as those

on corded telephones.

Electrical power: The telephone base of

this cordless telephone must be connected

to a working electrical outlet. The electrical

outlet should not be controlled by a wall

switch. Calls cannot be made from the

cordless handset if the telephone base is

unplugged, switched off or if the electrical

power is interrupted.

Potential TV interference: Some cordless

telephones operate at frequencies that may

cause interference to televisions and VCRs.

To minimize or prevent such interference, do

not place the telephone base of the cordless

telephone near or on top of a TV or VCR.

If interference is experienced, moving the

cordless telephone farther away from the

TV or VCR often reduces or eliminates the

interference.

Rechargeable batteries: Exercise care in

handling batteries in order not to create a

short circuit with conducting material such

as rings, bracelets and keys. The battery or

conductor may overheat and cause harm.

Observe proper polarity between the battery

and the battery charger.

•

User’s manual

THIS SIDE UP

Nickel-metal hydride rechargeable

batteries: Dispose of these batteries in a

safe manner. Do not burn or puncture the

battery. Like other batteries of this type, if

burned or punctured, they could release

caustic material which could cause injury

The RBRC® seal

The RBRC ® seal on the nickel-metal hydride battery

indicates that VTech Communications, Inc. is

voluntarily participating in an industry program to

collect and recycle these batteries at the end of their

useful lives, when taken out of service within the

United States and Canada.

The RBRC ® program provides a convenient

alternative to placing used nickel-metal hydride

batteries into the trash or municipal waste, which

may be illegal in your area.

VTech’s participation in RBRC® makes it easy for

you to drop off the spent battery at local retailers

participating in the RBRC® program or at authorized

VTech product service centers. Please call

1 (800) 8 BATTERY® for information on Ni-MH

battery recycling and disposal bans/restrictions in

your area. VTech’s involvement in this program is

part of its commitment to protecting our environment

and conserving natural resources.

RBRC ® and 1 (800) 8 BATTERY® are registered

trademarks of the Rechargeable Battery

Recycling Corporation.

FCC and IC regulations

FCC Part 15

This equipment has been tested and found to comply

with the requirements for a Class B digital device

under Part 15 of the Federal Communications

Commission (FCC) rules. These requirements are

intended to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation. If this equipment does

•cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to

try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment

and receiver.

Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV

technician for help.

Changes or modiﬁcations to this equipment not

expressly approved by the party responsible for

compliance could void the user’s authority to operate

the equipment.

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

Privacy of Communications may not be ensured

when using this phone.

To ensure safety of users, the FCC has established

criteria for the amount of radio frequency energy

that can be safely absorbed by a user or bystander

according to the intended usage of the product.

This product has been tested and found to comply

with the FCC criteria. The base shall be installed

and used such that parts of all persons’ body are

maintained at a distance of approximately 8 in (20

cm) or more.

This Class B digital apparatus complies with

Canadian requirement:

CAN ICES-3 (B)/NMB-3(B)

FCC Part 68 and ACTA

This equipment complies with Part 68 of the FCC

rules and with technical requirements adopted by

the Administrative Council for Terminal Attachments

(ACTA). The label on the back or bottom of this

equipment contains, among other things, a product

identiﬁer in the format US:AAAEQ##TXXXX. This

identiﬁer must be provided to your telephone service

provider upon request.

The plug and jack used to connect this equipment

to premises wiring and the telephone network must

comply with applicable Part 68 rules and technical

requirements adopted by ACTA. A compliant

telephone cord and modular plug is provided with

this product. It is designed to be connected to a

compatible modular jack that is also compliant. An

RJ11 jack should normally be used for connecting to

a single line and an RJ14 jack for two lines. See the

•

installation instructions in the user’s manual.

The Ringer Equivalence Number (REN) is used to

determine how many devices you may connect to

your telephone line and still have them ring when you

are called. The REN for this product is encoded as

the 6th and 7th characters following the US: in the

product identiﬁer (e.g., if ## is 03, the REN is 0.3). In

most, but not all areas, the sum of all RENs should

be ﬁve (5.0) or less. For more information, please

contact your telephone service provider.

This equipment may not be used with Party Lines.

If you have specially wired alarm dialing equipment

connected to your telephone line, ensure the

connection of this equipment does not disable your

alarm equipment. If you have questions about what

will disable alarm equipment, consult your telephone

service provider or a qualiﬁed installer.

If this equipment is malfunctioning, it must be

unplugged from the modular jack until the problem

has been corrected. Repairs to this telephone

equipment can only be made by the manufacturer or

its authorized agents. For repair procedures, follow

the instructions outlined under the Limited warranty.

If this equipment is causing harm to the telephone

network, the telephone service provider may

temporarily discontinue your telephone service. The

telephone service provider is required to notify you

before interrupting service. If advance notice is not

practical, you will be notiﬁed as soon as possible.

You will be given the opportunity to correct the

problem and the telephone service provider is

required to inform you of your right to ﬁle a complaint

with the FCC. Your telephone service provider may

make changes in its facilities, equipment, operation,

or procedures that could affect the proper functioning

of this product. The telephone service provider is

required to notify you if such changes are planned.

If this product is equipped with a corded or cordless

handset, it is hearing aid compatible.

If this product has memory dialing locations, you may

choose to store emergency telephone numbers

(e.g., police, ﬁre, medical) in these locations. If you

do store or test emergency numbers, please:

Remain on the line and brieﬂy explain the reason for

the call before hanging up.

Perform such activities in off-peak hours, such as

early morning or late evening.

Industry Canada

This device complies with Industry Canada

licence-exempt RSS standard(s).

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

Privacy of communications may not be ensured

when using this telephone.

The term ‘’IC:‘’ before the certiﬁcation/registration

number only signiﬁes that the Industry Canada

technical speciﬁcations were met.

The Ringer Equivalence Number (REN) for this

terminal equipment is 0.1. The REN is an indication

of the maximum number of devices allowed to be

connected to a telephone interface. The termination

on an interface may consist of any combination of

devices subject only to the requirement that the sum

of the RENs of all the devices does not exceed ﬁve.

This product meets the applicable Industry Canada

technical speciﬁcations.

RF radiation exposure statement

The handset complies with FCC RF radiation

exposure limits set forth for an uncontrolled

environment. The base should be installed and

operated with a minimum distance of 8 in (20 cm)

between the handset and all persons’ body. Use of

other accessories may not ensure compliance with

FCC RF exposure guidelines. This transmitter must

not be co-located or operating in conjunction with

any other antenna or transmitter. This equipment

complies also with Industry Canada RSS-102 with

respect to Canada’s Health Code 6 for Exposure of

Humans to RF Fields.

California Energy Commission

battery charging testing instructions

This telephone is set up to comply with the

energy-conserving standards right out of the box.

These instructions are intended for California Energy

Commission (CEC) compliance testing only.

When the CEC battery charging testing mode is

activated, all telephone functions, except battery

charging, will be disabled.

When ﬁrst purchased and properly installed for charging

(see ), put the handset on the charger Install the battery

to charge. The CEC battery charging testing mode is

activated while charging.

If you have registered the handset to a telephone base,

below are the testing instructions.

To activate the CEC battery charging testing mode:

Unplug the telephone base power adapter from

the wall outlet. Make sure all handsets are plugged

with charged batteries before proceeding.

While you press and hold /FIND HANDSET, plug

the telephone base power adapter back to the wall

outlet.

After about 20 seconds, when the light IN USE

starts ﬂashing, release and then /FIND HANDSET

press it again within 2 seconds.

When the phone successfully enters the energy

conserving mode, all cordless handset screens display

To register HS, see manual . When the phone fails to

enter the CEC battery charging testing mode, repeat

Step 1 through Step 3 above.

The telephone base will be powered up as normal

if you fail to press within /FIND HANDSET

2 seconds in Step 3.

To deactivate the CEC battery charging testing

mode:

Unplug the telephone base power adapter from the

wall outlet, then plug it back in. Then the telephone

base is powered up as normal.

base. Refer to the Add and register a handset

section.

For C-UL and cETL compliance only

Mesures de sécurité importantes

Aﬁn de réduire les risques d’incendie, de blessures

corporelles ou d’électrocution, suivez toujours ces

mesures préventives de base lorsque vous utilisez

votre téléphone :

Lisez et comprenez bien toutes les instructions.

Observez toutes les instructions et mises en

garde inscrites sur l’appareil.

Débranchez ce téléphone de la prise murale

avant de le nettoyer. N’utilisez pas de

nettoyeurs liquides ni en aérosol. N’utilisez

qu’un chiffon doux et légèrement humecté.

N’utilisez pas ce produit près de l’eau, tel

que près d’un bain, d’un lavabo, d’un évier de

cuisine, d’un bac de lavage ou d’une piscine, ou

dans un sous-sol humide ou sous la douche.

Ne déposez pas ce téléphone sur un chariot,

support ou table chancelants. L’appareil pourrait

tomber et être sérieusement endommagé.

Le boîtier de l’appareil est doté de fentes et

d’ouvertures d’aération situées à l’arrière ou en

dessous. Aﬁn d’empêcher la surchauffe, ces

ouvertures ne doivent pas être obstruées en

plaçant l’appareil sur un lit, divan, tapis ou autre

surface similaires. Ne placez pas cet appareil

à proximité d’un élément de chauffage ni d’une

plinthe électrique. De plus, ne l’installez pas

dans une unité murale ou un cabinet fermé qui

ne possède pas d’aération adéquate.

Ne faites fonctionner cet appareil qu’avec le

type d’alimentation indiqué sur les étiquettes de

l’appareil. Si vous ne connaissez pas le voltage

de votre maison, consultez votre marchand ou

votre fournisseur d’électricité.

•

Ne déposez rien sur le cordon d’alimentation.

Installez cet appareil dans un endroit

sécuritaire, là où personne ne pourra trébucher

sur la ligne d’alimentation ni le cordon

téléphonique modulaire.

N’insérez jamais d’objets à travers les fentes

et ouvertures de cet appareil, car ils pourraient

toucher à des points de tension dangereux ou

court-circuiter des pièces, ce qui constituerait

un risque d’incendie ou d’électrocution.

N’échappez pas de liquides dans l’appareil.

Aﬁn de réduire les risques d’électrocution, ne

démontez pas l’appareil, mais apportez-le plutôt

à un centre de service qualiﬁé s’il doit être

réparé. En enlevant le couvercle, vous vous

exposez à des tensions dangereuses ou autres

dangers similaires. Un remontage inadéquat

peut être à l’origine d’une électrocution lors

d’une utilisation ultérieure de l’appareil.

Débranchez l’appareil avant de procéder au

nettoyage. Utilisez un chiffon humide et doux.

Ne surchargez pas les prises de courant et les

rallonges.

Débranchez cet appareil de la prise de courant

et communiquez avec le département de

service à la clientèle de VTech dans les cas

suivants:

Lorsque le cordon d’alimentation est

endommagé ou écorché.

Si du liquide a été échappé dans l’appareil.

Si l’appareil a été exposé à une source

d’humidité telle que la pluie ou l’eau.

Si le produit ne fonctionne pas

normalement en respectant les instructions

de fonctionnement. Réglez uniquement

les commandes indiquées dans le les

instructions de fonctionnement. Les

réglages incorrects des autres commandes

pourraient provoquer un dommage qui

pourrait exiger un travail exhaustif de la part

d’un technicien autorisé aﬁn de rétablir le

fonctionnement normal de l’appareil.

Si le produit a été échappé et que le socle

et/ou le combiné a été endommagé.

Si le produit afﬁche une nette diminution de

sa performance.

Évitez d’utiliser un téléphone (autre qu’un sans

ﬁl) pendant un orage. Les éclairs peuvent être à

l’origine d’une électrocution.

N’utilisez pas le téléphone pour rapporter une

fuite de gaz à proximité de la fuite. En certaines

circonstances, une ﬂammèche pourrait être

10.

11.

12.

•

13.

14.

provoquée lorsque l’adaptateur est branché à

une prise de courant, ou lorsque le combiné

est déposé sur le socle. Ceci est un événement

commun associé à la fermeture d’un circuit

électrique. L’utilisateur ne devrait pas brancher

le téléphone à une prise de courant, et ne

devrait pas déposer le combiné chargé sur

le socle, si le téléphone se trouve à proximité

d’un endroit comportant des concentrations de

gaz inﬂammables, à moins que la ventilation

soit adéquate. Une ﬂammèche dans un tel

endroit pourrait provoquer un incendie ou une

explosion. De tels environnements peuvent

comprendre: des endroits où l’on utilise de

l’oxygène médical sans ventilation adéquate;

des gaz industriels (dissolvants de nettoyage,

des vapeurs d’essence, etc.); une fuite de gaz

naturel, etc.

Ne placez que le combiné de votre téléphone

près de votre oreille lorsqu’en mode de

conversation.

Ces adaptateurs ont été conçus pour être

orientés en position verticale ou montés au

sol. Les broches ne sont pas conçues pour

maintenir l’adaptateur en place si celui-ci est

barnché dans une prise au plafond ou sous une

table/ armoire.

N’utilisez que les adaptateurs inclus avec ce

produit. L’utilisation d’un adaptateur dont la

polarité ou la tension serait inadéquate risque

d’endommager sérieusement le produit et

mettre votre sécurité en péril.

LPS ou Classe 2 Adaptateur du chargeur :

Entrée 100-120V CA 150 mA 50/60 Hz;

Sortie : 6 V CC 400 mA

CONSERVEZ CES INSTRUCTIONS

Pile

MISE EN GARDE: Il peut y avoir un risque

d’explosion si vous utilisez le mauvais type de

piles pour le combiné. N’utilisez que le bloc-piles

rechargeable inclus ou le bloc-piles de rechange

(BT183342/BT283342).

N’incinérez pas les piles. Celles-ci risqueraient

d’exploser. Jetez les piles usées selon les

renseignements suivant le sceau du RBRC

MD.

N’ouvrez pas et ne mutilez pas la pile.

L’électrolyte qui s’en échapperait est corrosif et

pourrait causer des brûlures ou des blessures

aux yeux ou à la peau. L’électrolyte est toxique si

avalé.

Soyez prudents lorsque vous manipulez les piles

afin d’éviter les courts-circuits provoqués par des

matériaux conducteurs.

15.

16.

•

Rechargez la pile incluse avec cet appareil, selon

les instructions et limites spécifiées dans ce guide

d’utilisation.

Stimulateurs cardiaques implantés dans

l’organisme

Les simulateurs cardiaques (s’applique uniquement

aux téléphones numériques sans fil):

L’organisme ‘Wireless Technology Research, LLC

(WTR)’, une firme de recherche indépendante,

a mené une évaluation pluridisciplinaire des

interférences entre les téléphones sans fil portatifs

et les stimulateurs cardiaques implantés dans

l’organisme. Appuyée par l’Administration des

aliments et drogues (FDA) des États-Unis, la firme

WTR recommande aux médecins:

Avis aux détenteurs de stimulateurs cardiaques

Ils doivent tenir le téléphone sans fil à une

distance d’au moins six pouces du stimulateur

cardiaque.

Ils ne doivent PAS placer le téléphone sans fil

directement sur le stimulateur cardiaque, tel que

dans une poche de chemise, lorsque celui-ci est

en marche.

Ils doivent utiliser le téléphone sans fil en

l’appuyant sur l’oreille qui se trouve dans la

direction opposée au stimulateur cardiaque.

L’étude effectuée par l’organisme WRS n’a pas

identifié de risque pour les détenteurs de simulateurs

cardiaques causés par les gens qui utilisent un

téléphone sans fil à proximité de ceux-ci.

propos des téléphones sans fil

Alimentation électrique: Les mêmes

caractéristiques qui constituent des avantages

pour les téléphones sans fil affichent également

des restrictions. Les appels téléphoniques sont

transmis entre le combiné sans fil et le socle par

le biais d’ondes radio ; il y a donc la possibilité

que vos conversations téléphoniques sans fil

soient interceptées par des équipements de

réception radio se trouvant dans la portée du

combiné sans fil. Pour cette raison, vous ne devez

pas percevoir les communications téléphoniques

sans fil comme étant aussi confidentielles.

Alimentation électrique: Le socle de ce

téléphone sans fil doit être branché à une prise

électrique fonctionnelle. La prise électrique ne

doit pas être contrôlée par un interrupteur mural.

Les appels ne pourront pas être effectués du

combiné sans fil si le socle est débranché ou mis

hors tension ou si le courant est coupé.

•

Possibilité d’interférences aux téléviseurs:

Certains téléphones sans fil fonctionnent sur des

fréquences pouvant causer des interférences aux

téléviseurs et aux magnétoscopes. Pour réduire

ou prévenir de telles interférences, ne placez

pas le socle du téléphone sans fil près ou sur un

téléviseur ou magnétoscope. S’il y a présence de

parasites, il est conseillé d’éloigner le téléphone

sans fil du téléviseur ou du magnétoscope afin de

réduire possiblement les interférences.

Piles rechargeables: Manipulez les piles avec soin

afin de ne pas les court-circuiter avec des bagues,

bracelets ou clés. Les piles ou le conducteur peut

surchauffer et causer des blessures. Respectez la

polarité adéquate entre la pile et le chargeur.

Les bloc-piles rechargeables l’hydrure

métallique de nickel: Jetez ces blocs-piles de

manière écologique et sécuritaire. Ne les incinérez

pas et ne les percez pas. Tel que les autres piles

de ce type, elles pourraient dégager une matière

toxique qui peut causer des blessures corporelles si

elles sont brûlées ou percées.

Limited warranty

What does this limited warranty cover?

The manufacturer of this VTech Product warrants to

the holder of a valid proof of purchase (“Consumer” or

“you”) that the Product and all accessories provided

in the sales package (“Product”) are free from

defects in material and workmanship, pursuant to the

following terms and conditions, when installed and

used normally and in accordance with the Product

operating instructions. This limited warranty extends

only to the Consumer for Products purchased and

used in the United States of America and Canada.

What will VTech do if the Product is not free from

defects in materials and workmanship during

the limited warranty period (“Materially Defective

Product”)?

During the limited warranty period, VTech’s authorized

service representative will repair or replace at

VTech’s option, without charge, a Materially Defective

Product. If we repair the Product, we may use new

or refurbished replacement parts. If we choose to

replace the Product, we may replace it with a new or

refurbished Product of the same or similar design.

We will retain defective parts, modules, or equipment.

Repair or replacement of the Product, at VTech’s

option, is your exclusive remedy. VTech will return the

repaired or replacement Products to you in working

condition. You should expect the repair or replacement

to take approximately 30 days.

•

How long is the limited warranty period?

The limited warranty period for the Product extends

for ONE (1) YEAR from the date of purchase. If VTech

repairs or replaces a Materially Defective Product

under the terms of this limited warranty, this limited

warranty also applies to the repaired or replacement

Product for a period of either (a) 90 days from the

date the repaired or replacement Product is shipped to

you or (b) the time remaining on the original one-year

warranty; whichever is longer.

What is not covered by this limited warranty?

This limited warranty does not cover:

Product that has been subjected to misuse,

accident, shipping or other physical damage,

improper installation, abnormal operation or

handling, neglect, inundation, ﬁre, water or other

liquid intrusion; or

Product that has been damaged due to repair,

alteration or modiﬁcation by anyone other than an

authorized service representative of VTech; or

Product to the extent that the problem experienced

is caused by signal conditions, network reliability,

or cable or antenna systems; or

Product to the extent that the problem is caused

by use with non-VTech accessories; or

Product whose warranty/quality stickers, product

serial number plates or electronic serial numbers

have been removed, altered or rendered illegible; or

Product purchased, used, serviced, or shipped for

repair from outside the United States of America

or Canada, or used for commercial or institutional

purposes (including but not limited to Products

used for rental purposes); or

Product returned without a valid proof of purchase

(see item 2 on the next column); or

Charges for installation or set up, adjustment of

customer controls, and installation or repair of

systems outside the unit.

How do you get warranty service?

To obtain warranty service in the United States of

America, please visit our website at

www.vtechphones.com 1 (800) 595-9511 or call .

In Canada, go to or dial www.vtechcanada.com

1 (800) 267-7377.

NOTE: Before calling for service, please review the

user’s manual - a check of the Product’s controls and

features may save you a service call.

Except as provided by applicable law, you assume the

risk of loss or damage during transit and transportation

and are responsible for delivery or handling charges

incurred in the transport of the Product(s) to the service

location. VTech will return repaired or replaced Product

under this limited warranty. Transportation, delivery

or handling charges are prepaid. VTech assumes no

risk for damage or loss of the Product in transit. If the

Product failure is not covered by this limited warranty,

or proof of purchase does not meet the terms of this

limited warranty, VTech will notify you and will request

that you authorize the cost of repair prior to any further

repair activity. You must pay for the cost of repair and

return shipping costs for the repair of Products that are

not covered by this limited warranty.

What must you return with the Product to get

warranty service?

Return the entire original package and contents

including the Product to the VTech service location

along with a description of the malfunction or

difﬁculty; and

Include a “valid proof of purchase” (sales receipt)

identifying the Product purchased (Product model)

and the date of purchase or receipt; and

Provide your name, complete and correct mailing

address, and telephone number.

Other limitations

This warranty is the complete and exclusive agreement

between you and VTech. It supersedes all other

written or oral communications related to this Product.

VTech provides no other warranties for this Product.

The warranty exclusively describes all of VTech’s

responsibilities regarding the Product. There are no

other express warranties. No one is authorized to

make modiﬁcations to this limited warranty and you

should not rely on any such modiﬁcation.

State/Provincial Law Rights: This warranty gives you

speciﬁc legal rights, and you may also have other

rights, which vary from state to state or province to

province.

Limitations: Implied warranties, including those of

ﬁtness for a particular purpose and merchantability (an

unwritten warranty that the Product is ﬁt for ordinary

use) are limited to one year from the date of purchase.

Some states/provinces do not allow limitations on how

long an implied warranty lasts, so the above limitation

may not apply to you. In no event shall VTech be liable

for any indirect, special, incidental, consequential,

or similar damages (including, but not limited to lost

proﬁts or revenue, inability to use the Product or

other associated equipment, the cost of substitute

equipment, and claims by third parties) resulting from

the use of this Product. Some states/provinces do

not allow the exclusion or limitation of incidental or

consequential damages, so the above limitation or

exclusion may not apply to you.

Please retain your original sales receipt

as proof of purchase.

Technical specifications

Frequency

control

Crystal controlled PLL synthesizer

Transmit

frequency

1921.536-1928.448 MHz

Channels 5

Nominal

effective

range

Maximum power allowed by FCC and

IC. Actual operating range may vary

according to environment conditions

at the time of use.

Power

requirements

Handset: 2.4V 400mAH 2xAAA Ni-MH

battery

Charger: 6V DC @ 400mA

Memory Phonebook:

50 memory locations, up to

30 digits and 15 characters

Caller ID log:

50 memory locations; up to 24 digits

and 15 characters

VTech Communications, Inc.

A member of THE VTECH GROUP OF COMPANIES.

VTech is a registered trademark of VTech Holdings Limited.

Speciﬁcations are subject to change without notice.

Document order number: 91-007933-020-100

Designed to ﬁt your home.

And your life.

Produktspecifikationer

Varumärke:	VTech
Kategori:	Telefon
Modell:	VC7100
Färg på produkten:	Zwart
Vikt:	1520 g
Bredd:	209 mm
Djup:	250.5 mm
Höjd:	53 mm
På / Av knapp:	Ja
USB uttag:	Ja
USB-kontakttyp:	USB Type-B
Typ av anslutningskontakt:	6,3 mm
Antal USB 2.0-portar:	1
Mikrofon, linjeingång:	Ja
Videokapacitet:	Nee
Equalizerinställningar:	Ja
Stöder Windows:	Windows 10, Windows 2000, Windows 7, Windows 8, Windows 8.1, Windows XP
Mac-kompatibilitet:	Ja
Stroomverbruik:	1000 mA
Rackmontering:	Nee
Frekvensomfång:	20 - 75000 Hz
Antal band equalizer:	3
Överhörning (1kHz):	-80 dB
Samplingshastighet:	44.1 kHz
Antal kanaler:	10 kanalen
Mikrofoningångsimpedans:	2600 Ohm
Strömförbrukning (typiskt):	10 W
Antal mikrofoningångar:	2
Bearbetar digitalt ljud:	16 Bit
DJ mixer:	Ja
Skrämmande kraft:	48 V
Samplingsfrekvenser som stöds:	44.1 kHz