Watson VM-50-MI Bruksanvisning

Watson Inte kategoriserad VM-50-MI

Läs nedan 📖 manual på svenska för Watson VM-50-MI (6 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/6
Thank you for choosing Watson Pro
Please rea llowd and fo these in and st cti s,ru on
keep th is ma alnu in a fe .sa place
VM-50-MI
Micro V-Mount Li-ion Battery
SA ET INSTRUCTIONF Y S
Make sure the battery is fully charged before use.
When not in use, remove the battery from its device. Some
electronic equipment will draw current even when the switch
is off.
Do not short-circuit the terminals. This battery is protected
with an internal self-resetting fuse, but short circuits may still
cause severe damage to the battery.
Do not attempt to open the battery case under any
circumstances.
Do not remove the battery from any equipment that is
powered on. Always power off your equipment before
removing the battery.
Use the battery only under proper environmental conditions:
14°F to 122°F (-10°C to 50°C), and with a relative humidity
(RH) less than 85%.
Storage environment: short term (one month) -4F° to 104°
F (-20°C to 40°C) and RH 45% to 85%; medium term (three
months) -4°F to 86°F (-20°C to 30°C) and RH 45% to 85%; long
term (one year) -4°F to 77°F (-20°C to 25°C) and RH 45% to
85%.
The battery may be warm during use or recharging. This is
normal.
The battery should be charged up to 50% for long-term
storage. After 4 months of storage, the battery will require a
recharge up to 50%.
Keep the battery out of fire, heat, and high pressure.
Do not expose the battery to rain or moisture.
Do not drop the battery or expose it to strong shocks.
Keep this unit away from water and any flammable gases or
liquids.
Clean the battery and terminals with a clean, soft, and dry
cloth.
When operation time has noticeably decreased, the battery
may need to be replaced.
Keep this product away from children.
Store the battery in a cool, dry place.
All images are for illustrative purposes only.
PRODUC EATURET F S
Check button activates LCD screen and shows
remaining battery capacity and output voltage.
USB Standard-A, Type-C, and Micro-B ports to power
USB devices like laptop computers, smartphones,
tablets, and other portable devices.
D-tap output for powering cameras and accessories.
Built-in intelligent control circuit for protection
against damage caused by current, voltage,
temperature, or short-circuiting.

Produktspecifikationer

Varumärke: Watson
Kategori: Inte kategoriserad
Modell: VM-50-MI

Behöver du hjälp?

Om du behöver hjälp med Watson VM-50-MI ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Watson Manualer

Watson

Watson C-VM-2C Bruksanvisning

23 September 2024
Watson

Watson VM-50-MI Bruksanvisning

23 September 2024
Watson

Watson B-3629 Bruksanvisning

23 September 2024
Watson

Watson C-SPT Bruksanvisning

23 September 2024
Watson

Watson VM-148-HCS-R Bruksanvisning

23 September 2024
Watson

Watson VM-95-SE Bruksanvisning

23 September 2024
Watson

Watson MI-VM Bruksanvisning

18 September 2024
Watson

Watson NP-BY1 Bruksanvisning

18 September 2024
Watson

Watson AHDBT-301 Bruksanvisning

18 September 2024
Watson

Watson B-5301 Bruksanvisning

18 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024