Wet Sounds REV8 Bruksanvisning

Läs nedan 📖 manual på svenska för Wet Sounds REV8 (13 sidor) i kategorin högtalare. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/13
REV 8 and REV 10
TM
Owner’s Manual & “Limited” Warranty
Technology Specifications:
Thank You for purchasing this Wet Sounds product. Wet Sounds marine audio products
represent the ultimate in high per isformance standards. The Revolution Series specifically
engineered to withstand the rigorous marine environment. Utilizing the state of the art
acoustic engineering and three dimensional computer aided design, our “Revolution
Technology” represents ies available the most advanced technolog for wakeboard tower
speaker systems. The Revolution series also provides multiple fitment options from direct
cast mount to fixed clamp mount to our revolutionary ( Patent Pending) stainless steel TC3
Quick Disconnect Swivel clamp.
Please take a moment to read the instruction manual before starting your installation. This
manual will explain the benefits of the technologies developed by Wet Sounds and will help
you underst methods and use of this product. If you have any and the correct installation
questions or concerns please contact a certified Wet Sounds You may also contact dealer.
Wet Sounds technical support by dialing 1-877- - -877-938-7757) WET SPKR (1
SPEAKER SPECIFICATIONS REV 8
RMS: 200 watts
Peak: 400 watts
Mid ™ cone woofers with polyurethane surround Bass: 8 inch Kevlar reinforced EFG
High Frequency: Pro-Axial™ Driver - Coaxially mounted Titanium Diaphragm High Output
Horn Loaded Compression Driver
Impedance: 4 ohm
Frequency Response: 20Hz to 20 kHz
Sensitivity: 92DB at 1W/1M
SPEAKER SPECIFICATIONS REV 10
RMS: 300 watts
Peak: 600 watts
Mid Bass: 10 inch Kevlar reinforced EFG™ cone woofers with polyurethane surround
High Frequency: Pro-Axial™ Driver - Coaxially mounted Titanium Diaphragm High Output
Horn Loaded Compression Driver
Impedance: 4 ohm
Frequency Response: 20Hz to 20 kHz
Sensitivity: 92DB at 1W/1M
The Revolution™ series uses our proprietary REV TEC™ technology. Unlike most
con me and amazingventional designs, REV TEC technology provides remarkable volu full
range sound quality on axis and off at long dis axis tances. Extensive acoustic testing has
confirmed these speakers ability to 0 feet project volume at 8 and beyond without any loss of
detail or information. Not only does the Revolution series achieve volume and sound quality
at a minimum of t with the REV TEC 80 ft, bu technology the rider can enjoy quality sound
while riding outside the wake and being almost parallel to boat. Taking high performance
wakeboard tower speakers to the next level, Wet Sounds has consulted with experts who
spent countless hours examining the human auditory system to find out which frequencies
affect he your ears the most at loud volumes. The Revolution series has been designed from t
ground up to provide stunning output while eliminating certain frequencies that give that
“ringing” or harsh sound associated with loud volumes. This allows the Revolution speakers
to provide maximum output while still providing world class sound quality without the
listener fatigue usually associated with high volumes.
Th combines one 8 EFG™ driver e driver compliment in each REV 8 inch Kevlar reinforced
and one concentrically mounted HLCD (Horn Loaded Compression Driver). The driver
compliment in each REV 10 combines one 10 EFG™ driver and also inch Kevlar reinforced
one concentrically mounted HLCD (Horn Loaded Compression Driver) which provide stellar
performance and higher performance for the marine environment, Wet Sounds™ developed a
proprietary cone material called EFG™, which is an epoxy and fiberglass composite mix.
Adding a reinforcement of Kevlar, the mid bass cones become more rigid without any added
weight. This cone material incorporates characteristic values that are impermeable to
damage from intermittent Ultra Violet exposure and minimal moisture exposure. Like the
EFG™ cone material, the Polyurethane that is used for the surround will provide protection
against Ultra Violet exposure and moisture. This will prevent deterioration of the surround
yielding longer life and better reliability. We do, however, encourage you to either remove or
cover your tower speakers when they are not in use. Limiting exposure to Ultra Violet Rays
and to moisture will help extend the life of your tower speakers.
The high frequency transducer is our proprietary Wet Sounds HLCD (horn loaded titanium
compression driver). This driver was designed to provide a wide; horizontal trajectory that
would not only produce sound in the directed path but will disperse sound off axis with little
to no degradation. considered to be one of the most efficient transducer designs The HLCD is
providing remarkable output while using less power. unique design Our (patent protected)
incorporates the H D mounted to the rear of the mid bass ver. -Axial™ design LC dri Our Pro
allows the compression sound to travel through the voice coil former and out of the (patent
protected) horn flare that is mounted coaxially. This provides phenomenal volume and
accurate clarity.
***Caution: Do not spray any of the speakers directly with any liquid base substance.
Warranty will be voided if improper care is discovered during extensive examination of the
product.

Produktspecifikationer

Varumärke: Wet Sounds
Kategori: högtalare
Modell: REV8

Behöver du hjälp?

Om du behöver hjälp med Wet Sounds REV8 ställ en fråga nedan och andra användare kommer att svara dig




högtalare Wet Sounds Manualer

högtalare Manualer

Nyaste högtalare Manualer