Wharfedale Diamond 12.C Bruksanvisning

Wharfedale högtalare Diamond 12.C

Läs nedan 📖 manual på svenska för Wharfedale Diamond 12.C (12 sidor) i kategorin högtalare. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/12

DIAMOND 12.0

DIAMOND 12.1

DIAMOND 12.2

DIAMOND 12.3

DIAMOND 12.4

DIAMOND 12.C

DIAMOND 12 Series

Diamond 12_manual.indd 1

User Manual

BRITAIN'S M FAMOUS LOUDS AKERSOST PE

Before installing this product read all these instructions!

Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.

Before making any connections, switch all the units in your system oﬀ at the mains.

Set the volume control at minimum when you switch on your system or change sources, and turn the level up gradually.

DO NOT use your ampliﬁer at full volume.

Ensure that all loudspeakers in the system are correctly wired.

DO NOT subject your loudspeakers to excessive cold, heat, humidity or sunlight.

Loudspeakers should not be placed directly facing other hi-ﬁ units, or share the same shelf or cabinet.

DO NOT place heavy objects on top of loudspeakers.

Some manufacturers forbid the placing of objects on top of their TV sets. Check your TV handbook before installing the speaker directly on your

TV set. Consult your TV dealer if you are in any doubt.

DO NOT connect speaker terminals to the mains supply.

DO NOT dismantle the loudspeaker. There are no user serviceable parts inside it and you will void the warranty by doing so.

Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, the apparatus has

been exposed to rain or moisture, does not operate normally, or has been dropped.

Caution: Changes or modiﬁcations not expressly approved by the manufacturer could void the user's authority to operate this device.

Unpacking Your Loudspeaker

DIAMOND 12 loudspeakers come in diﬀerent shapes and sizes. If you are unpacking a ﬂoor stander, please remember that these units are heavy.

We suggest that you have someone to assist you.

Lift the loudspeaker carefully out of the packing. DO NOT try and lift the loudspeaker using the protective bag.

Unpack the accessories carefully.

If there is any sign of damage or if the contents are incomplete, report this to your dealer as soon as possible.

Retain the packing for future safe transport of the product. If you dispose of the packing, do so with respect to any recycling provisions in your area.

Attaching the Spikes to Floorstanding Models – D12.3, D12.4

· Make sure you have plenty of unobstructed working space.

Place a soft cloth on the ﬂoor to protect the loudspeaker.

· Invert the loudspeaker onto the cloth.

· Thread a locknut onto each spike and loosely rub it up the thread.

· Thread the spikes into the spike inserts. Tighten them with ﬁnger tight.

· Invert the loudspeaker. Be careful not to damage the ﬂoor with the spikes.

Levelling the Loudspeakers

When the speaker is upright: You will probably ﬁnd that the speaker will wobble with one spike not contacting the ﬂoor. Adjust this spike until

With the aid of a spirit level move each spike in and out until the loudspeaker is level and sitting squarely on all four

Screw in rubber feet are provided for use on wood or stone ﬂoors etc. and should be attached in the same manner

as the spikes.

all four spikes are in contact to the ﬂoor.

spikes without rocking.

Now tighten each locknut securely against the collar in the plinth to secure the spike.

Important Safety Information

This symbol indicates that there are important operating and maintenance instructions in the literature

accompanying this unit.

Diamond 12_manual.indd 2

Stands and Brackets

The bookshelf loudspeakers are intended primarily for stand mounting, though they can be mounted on wall brackets or even on sturdy

shelves. The quality of loudspeaker stands greatly inﬂuences the performance of your loudspeakers, please do not use ﬂimsy products.

Centre Channel Loudspeakers

Each centre channel loudspeaker is supplied with one set of mounting feet. By using combination of large and small feet the loudspeaker may

be angled to point directly at the listening position. This will be found useful when the centre speaker is positioned under the TV screen.

Specialist audio cable usually oﬀers better performance than general purpose ‘bell’ or ‘zip’ wire.

Preparing the DIAMOND 12 Loudspeakers

Cables and Connectors

Choosing Loudspeaker Cable

Choose a cable of suitable diameter – cable that is too thin will limit the dynamics of the sound and may impair the bass response. Audio cable

is polarised, with two cores of diﬀerent colours, or often a raised rib or coloured tracer in the case of twin cable. Before you purchase your cable,

give careful thought to the positioning of your loudspeakers.

This is especially the case if you are bi-wiring your loudspeakers.

Cable lengths to loudspeaker pairs should be the same for left and right channels in order to equalise the signal

transmission. Allow some slack in your speaker cables so you can alter their position to best advantage.

Preparing Loudspeaker Cable

Split the twin cores to a depth of about 40mm. Carefully strip the insulation from each end, leaving about 10mm of

bare wire. If the cable is stranded, lightly twist to gather any loose strands.

Connecting Screw Terminals

All loudspeakers use screw terminals.

Unscrew the terminal. Insert the bare end of the cable into the hole in the base of the terminal. Tighten securely.

When connecting terminals make sure you leave no strands of bare wire that can short across to adjacent terminals.

As an alternative to bare wire you can use specialist spade connectors. Your Wharfedale dealer will be

pleased to advise you on this issue.

Crossover Networks

Bi-Wireable Networks

Most speakers in the DIAMOND 12 ﬂoorspeaker eaker use a special bi-wireable crossover panel with four

terminal binding posts. Please follow the drawing carefully to see the correct orientation of the

loudspeaker terminals.The upper terminals connect to the treble unit, the lower pair to the bass unit. As

supplied, the treble terminal pairis connected to the bass terminal pair via removable metal straps.These

should be left in place for standard installations.

Why Bi-Wire?

Using separate cables for treble and bass units in a bi-wiring conﬁguration reduces intermodulation eﬀects

and improves headroom and clarity. To bi-wire, you will need to install two lengths of twin core cable

between the ampliﬁer and each loudspeaker.

Diamond 12_manual.indd 3

Produktspecifikationer

Varumärke:	Wharfedale
Kategori:	högtalare
Modell:	Diamond 12.C
Typ av operation:	Draaiknop
Färg på produkten:	Zilver
Bredd:	595 mm
Djup:	550 mm
Höjd:	454 mm
Sladdlängd:	1.5 m
Energie-efficiëntieklasse:	A
Belysning inuti:	Ja
Total inomhuskapacitet (ugnar):	50 l
Antal automatiska program:	10
Tillgångar:	2800 W
Typ av ugn:	Elektrische oven
Ugnens termostatområde:	50 - 275 °C
Skriv timer:	Digitaal