Whirlpool DSCX 10121 Bruksanvisning

Whirlpool Torktumlare DSCX 10121

Läs nedan 📖 manual på svenska för Whirlpool DSCX 10121 (8 sidor) i kategorin Torktumlare. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/8

1. On/O button (Reset if long

pressed)

2. Programme button (Water

conductivity setting if long

pressed)

3. Cycle end alert

4. Key lock

5. Steam option

6. Knob (Turn to select / Press to

conrm)

7. Start delay

8. Drying time

9. Dryness level

10. Options button

11. Start / Pause button

12. Display

13. Programmes area

CONTROL PANEL

1. Worktop

2. Control panel

3. Water tank

4. Door

5. Door handle

6. Door lter (behind door)

7. Bottom lter (behind ap)

8. Adjustable feet (4)

Before using the appliance carefully read the

Health and Safety guide.

DAILY REFERENCE

GUIDE

PRODUCT DESCRIPTION

APPLIANCE

1. 2. 7.3. 8.

12.

4. 9.5. 10. 11.6.

13.

5. 4.

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance,

please register your appliance on http://www.whirlpool.eu/register

Make sure that no lighters

or matches remain in the

laundry.

Make sure that the laundry

is not soaked with

ammable liquids.

DAILY USE

FIRST TIME USE

BEFORE USING THE DRYER

CHECK DRAIN HOSE AND WATER TANK

Make sure that the drain hose on the back of the dryer is xed

correctly, either to the dryer’s water tank (see picture), or to your

domestic sewage system (see Installation guide).

Also make sure that the water tank is correctly inserted.

See Use and Care Guide for more details on functions /

see last page for information on how to obtain the Use and Care Guide

1. LOAD LAUNDRY

Prepare your laundry according to the recommendations in

section .HINTS AND TIPS

Make sure that pockets are empty, fasteners closed and

ribbons tied together.

Open the door and load the laundry. Observe the

maximum load sizes given in the PROGRAMME CHART.

2. CLOSE DOOR

Make sure that no laundry gets stuck between door glass

and door lter.

Close the door so that you can hear it click shut.

3. SWITCH ON DRYER

Press the « until the programme button lights On/O button

up. An animation occurs, and there is a sound. Afterwards

the dryer is ready to be operated.

4. SET THE DESIRED PROGRAMME

GUIDED MODE – the button light will guide you through

setting your programme in the following order: selection of

programme / drying time (ONLY if Drying time or Airing

programme is selected) / dryness level (only if selectable /

adjustable) / options. As soon as you conrm a selection by

pressing the knob, the button light will jump to the next

step.

Select programme:

Make sure that the « lights up. Programme button

Turn the knob to select the desired programme.

The indicator next to the selected programme lights up.

Conrm the desired programme by pressing the knob.

1 2

Find more information regarding programmes in the

PROGRAMME CHART.

Select Drying time, if needed

Only if you have selected programme Drying time or Airing «,

you can set the desired drying time from a minimum of 10

minutes to maximum 180 minutes (three hours).

Make sure that the lights up. Drying time button

WARNING

Turn the knob to select the desired drying time. Conrm it

by pressing the knob.

Set dryness level, if needed

If you want to change the dryness level, make sure that the

Dryness level button « lights up.

Turn the knob to select the desired dryness level, then press

the knob to conrm.

Select options, if needed

If you want to select additional options, make sure that the

Options button « lights up. The options which are selectable

for your programme are indicated by lighting arrows.

Turn the knob to select the desired options. The symbol of

the selected option will blink. To conrm it, press the knob.

Some options / functions can be selected by directly

pressing the button.

Refer to section OPTIONS, FUNCTIONS AND

INDICATORS for more information.

INDIVIDUAL MODE

After you have switched on the dryer, you are not forced to

follow the .GUIDED MODE

It is up to you which order you choose to set your

programme. To do a setting, rst press the relevant button,

then turn the knob to select, and nally press the knob to

conrm.

The variety of options and dryness levels depends on the

programme selected. Therefore it is recommended to start

your setting with selecting the programme.

5. START PROGRAMME

Press and hold « until the button lights up Start/Pause

solidly; the drying process starts.

The duration can be recalculated and adapted in the course

of the programme.

During such phases, an animation occurs on the display.

6. CHANGE THE SETTINGS OF A RUNNING

PROGRAMME, IF NEEDED

You can still change some settings after a programme was

started:

• Adjust drying time (only if programme Drying time is

selected)

• Add or cancel an option, provided the progress of the

programme still allows it.

Press the relevant button. The selected setting will blink for

a few seconds.

While blinking, you can adjust the setting by turning the

knob. If the value or setting stopped blinking, press the

button again.

Press the knob to conrm the modication. If you do not

conrm, the modication will be conrmed automatically

— the modied setting will stop blinking.

The programme will continue automatically.

To change the settings of a running programme or start

delay, you can also:

• press Start/Pause to put the running programme on pause

• change your settings

• press Start/Pause again to continue the programme.

7. RESET A RUNNING PROGRAMME, IF NEEDED

Press and hold the « until “rES” appears on On/O button

the display.

The programme is ended afterwards.

Immediately open the door and unload the laundry, so that

eventual heat in the laundry can dissipate.

8. SWITCH OFF THE DRYER AFTER PROGRAMME END

At the end of the programme, „End“ appears on the

display. Press « to switch o the dryer. Open the On/O

door and take out your laundry.

The dryer will switch o automatically in about a quarter of

an hour after programme end, to save energy.

9. EMPTY WATER TANK / CLEAN DOOR FILTER /

CLEAN BOTTOM FILTER

Refer to section CARE AND MAINTENANCE.

Produktspecifikationer

Varumärke:	Whirlpool
Kategori:	Torktumlare
Modell:	DSCX 10121

Behöver du hjälp?

Om du behöver hjälp med Whirlpool DSCX 10121 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Torktumlare Whirlpool Manualer

Whirlpool W6 D94WR SPT Bruksanvisning

9 Januari 2025

Whirlpool FFT M11 9X2BS BE R Bruksanvisning

6 Januari 2025

Whirlpool FFT M11 8X2BS BE R Bruksanvisning

6 Januari 2025

Whirlpool FT M22 8X3B EU Bruksanvisning

6 Januari 2025

Whirlpool awz 8813 Bruksanvisning

20 December 2024

Whirlpool ST U 93E EU Bruksanvisning

11 December 2024

Whirlpool FFT M11 82 SPT Bruksanvisning

10 December 2024

Whirlpool FFT CM11 8XB FR Bruksanvisning

10 December 2024

Whirlpool FFT M11 8X3B IT Bruksanvisning

10 December 2024

Whirlpool FFT M11 9X2BY EE Bruksanvisning

10 December 2024

Torktumlare Manualer

Nyaste Torktumlare Manualer

Electrolux EDV854J3WB Bruksanvisning

15 Januari 2025

Hoover HRE C10TE-80 Bruksanvisning

14 Januari 2025

Samsung DVE54CG7150W Bruksanvisning

14 Januari 2025

BEKO BMT481WI Bruksanvisning

14 Januari 2025

BEKO BMT491WI Bruksanvisning

14 Januari 2025

SEIKI SC-1000AU10HP Bruksanvisning

14 Januari 2025

Hoover HRE C10TBER-80 Bruksanvisning

14 Januari 2025

Privileg PWHPD M11 82 N Bruksanvisning

14 Januari 2025

Gorenje WNS1X4ARTWIFI Bruksanvisning

13 Januari 2025

Gorenje DPNA83WIFI Bruksanvisning

13 Januari 2025