Worx WX820L.2 Bruksanvisning

Worx Multiverktyg WX820L.2

Läs nedan 📖 manual på svenska för Worx WX820L.2 (32 sidor) i kategorin Multiverktyg. Denna guide var användbar för 15 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/32

5-in-1 Multi Sander EN P03

Multiponceuse 5 en 1 F P15

Lijadora multifunción 5 en 1 ES P23

WARNING: Some dust created by power

sanding, sawing, grinding, drilling

and other construction activities contains

chemicals known to the State of California

to cause cancer, birth defects or other

reproductive harm. Some examples of these

chemicals are:

• Lead from lead-based paints;

• Crystalline silica from bricks and cement

and other masonry products;

• Arsenic and chromium from chemically-

treated lumber.

Your risk from these exposures varies,

depending on how often you do this type

of work. To reduce your exposure to these

chemicals: work in a well ventilated area,

and work with approved safety equipment,

such as those dust masks that are specially

designed to ﬁlter out microscopic particles.

WARNING: This product can expose

you to chemicals including lead and

Di(2-ethylhexyl)phthalate (DEHP) which

are known to the State of California to

cause cancer and birth defects or other

reproductive harm. For more information go

to www.P65Warnings.ca.gov.

WARNING: Read all safety warnings,

instructions, illustrat ions and speciﬁcations

provided with this power tool.

Failure to follow all

instructions listed below may result in electric shock, ﬁre

and/or serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂammable liquids, gases or dust.

Power tools

create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool.

Distractions can cause

you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way. Do not use

any adapter plugs with earthed (grounded)

power tools.

Unmodiﬁed plugs and matching

outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators.

There is an increased risk of electric

shock if your body is earthed or grounded

c) Do not expose power tools to rain or wet

conditions.

Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp

edges or moving parts.

Damaged or entangled

cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use.

Use

of a cord suitable for outdoor use reduces the risk of

electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply.

Use of an RCD reduces

the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and

use common sense when operating a power

tool. Do not use a power tool while you

are tired or under the inﬂuence of drugs,

alcohol or medication.

A moment of inattention

while operating power tools may result in serious

personal injury.

b) Use personal protective equipment. Always

wear eye protection.

Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool.

Carrying power tools

with your ﬁnger on the switch or energising power

tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on.

A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times.

This enables better control

of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing

or jewelry. Keep your hair and clothing away

from moving parts.

Loose clothes, jewelry or long

hair can be caught in moving parts.

g) If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used.

Use of dust collection can reduce dust-

related hazards.

h) Do not let familiarity gained from frequent

use of tools allow you to become complacent

and ignore tool safety principles.

A careless

action can cause severe injury within a fraction of

a second.

Produktspecifikationer

Varumärke:	Worx
Kategori:	Multiverktyg
Modell:	WX820L.2
Enhetsplacering:	Ingebouwd
Typ av operation:	Touch
Färg på produkten:	Zwart
Inbyggd display:	Ja
Timer:	Ja
Vikt:	10500 g
Bredd:	576 mm
Djup:	518 mm
Höjd:	50 mm
Barnlås:	Ja
Håll varm funktion:	Ja
Typ av material (överst):	Glas
Antal brännare/kokzoner:	4 zone(s)
Typ av häll:	Inductiekookplaat zones
Antal gasbrännare:	0 zone(s)
Antal elektroniska kokzoner:	4 zone(s)
Vanlig brännare/kokzonsdiameter:	160 mm
Normal brännare/kokzon:	1400 W
Kontrollposition:	Boven voorzijde
Ansluten last (elektrisk):	7400 W
På / Av knapp:	Ja
Ansluten last (gas):	- W
Bredd på häll:	57.6 cm
Forma sjudgrop/kokzon:	Rond
Forma vanlig brännare/kokzon:	Rond
Forma stor brännare/kokzon:	Rond
Boost funktion:	Ja
Antal boosters:	2
Restvärmeindikator:	Ja
Antal kokzoner som ska användas samtidigt:	4
Förstärka stor brännare/häll:	3000 W
Brofunktion:	Ja
AC-ingångsspänning:	400 V
Kokkontrollfunktion:	Ja