Xiaomi Yeelight Smart LED Ceiling Lamp Bruksanvisning

Xiaomi Inte kategoriserad Yeelight Smart LED Ceiling Lamp

Läs nedan 📖 manual på svenska för Xiaomi Yeelight Smart LED Ceiling Lamp (3 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/3

Yeelight Smart LED Ceiling Light

Frontal projection of ttings

(basis) of the lamp

Backside the lamp base

switching device, connecting

detail

blocking switch

Basis

Opening for fastening of a

cartridge

Fixing opening for the self-

cut screw

Opening for

threading of a cord

Expansion

bolt shield

x 2

Screw self-tapping

screw x 2

Metric screw Remote control (not

basic equipment)

Installation direction

1. Open packaging, get the ceiling lamp, shift inside the blocking switch, remove a support.

Attention! In order to avoid defeat by an electric current before installation it is necessary

to disconnect power supply, to set step by step accurately according to the instruction. The

wrong installation can lead to falling, the re, defeat by current and to other accidents.

2. Fixing of the basis

Way a: to pass a cord of food through an opening for a cord, using the self-cut screw to x

the basis on a ceiling, to be convinced that the basis is reliably xed. (The recommended

way).

Way b: Check integrity of two knots of fastening of a connecting box of the lamp, after check

to stretch a cord through an opening for a cord, using metric screws to x the basis with a

connecting box on a ceiling, to be convinced that the basis is reliably xed.

3. Connection of a cord of food.

According to requirements of the following scheme, it is necessary to remove isolation

from a wire on 8-9 mm.

Insert a cord of food into an opening of a

terminal block (before pulling out a cord,

it is necessary to press the red button on

a terminal block, and after that to pull out

him).

Connect a cord of food, as shown in the

picture, to check reliability of connection.

4. With both hands take the lamp from two parties, without pressing a luminous surface,

to direct to the basis, to slightly push both parties of the lamp into the basis, after click

installation of the lamp is complete. Before unclenching hands, it is necessary to be

convinced that latches on both sides of the lamp completely became on places.

Remote control

(The remote control isn’t included in a basic equipment, it needs to be purchased

separately)

For this purpose, to adjust connection of the panel with the ceiling Yeelight LED lamp for

use them in one room, it is necessary to turn on the ceiling lamp, within 60 seconds, at

the same time press the OFF+M keys on the remote control and at once to release. The

blinking indicator lamp on the panel means that there is a connection installation. Wait until

the lamp starts blinking, it means that installation of connection is complete.

Description of functions

To turn on

the light

To turn o

the light

Control of color

temperature

Night lamp

Intellectual management

1. Scan a QR code or load the Yeelight mobile application;

2. The ceiling lamp has to be in the included state, perform operations being guided by

application operation manuals.

Make sure that there is an access to WI-FI network and continuous connection to the

Internet.

These goods are compatible to the intellectual Mijia platform, it can be managed through

the Mijia application, support the MIUI system, can have access and to be interconnected

also with other products of the intellectual Mijia platform.

Restoration of factory settings

Using the food switch, to continuously switch on and o light of 5 times (to switch on and

o every time for 2 seconds), in 5 seconds the lamp will automatically reboot and factory

settings will be restored.

* if the ceiling lamp is used in the new network environment, it is necessary to restore

factory settings, and after that anew to adjust network connection.

Parameters

Product model: YLXD01YL;

Range of color temperature: 2700K - 6500K;

Working temperature:-10 - +40 °C;

Range of working humidity: 0% - 85% of RH;

Useful life: about 25000 hours;

Power factor: 0.9;

Rated power: 28 W;

Rated power consumption: 220V - 50/60 Hz 0.127 A;

Supports: Android 4.4 & iOs 8.0 and subsequent versions;

Wireless connection: WI-FI IEEE of 802.11 b/g/n 2.4 GHz, Bluetooth 4.2 BLE.

Features of a product

Adjustment of color

temperature

Brightness

control

Night lamp -

moonlight

Color rendition

coecient

Protection against

dust

Intellectual location Management via

the mobile phone

Software update

Special indications for safety measures

1. Before use be convinced that voltage corresponds to the working tension of this

product; use of improper tension can lead to damage of a product or potentially dangerous

situation;

2. it is impossible to change LED modules, it is impossible to sort a product independently;

3. in operating time the lamp can make heat, it is necessary to support convection of air for

a thermolysis.

Hazardous substances

This table is made on the basis of regulations of SJ/T 11364

О: designation means that the content of harmful substance in this detail below the

restrictions specied in regulations of GB/T 26572

Х: designation means that the content of harmful substance in this detail exceeds the

restrictions specied in regulations of GB/T 26572

XIAOMI-MI.COM

Produktspecifikationer

Varumärke:	Xiaomi
Kategori:	Inte kategoriserad
Modell:	Yeelight Smart LED Ceiling Lamp
Färg på produkten:	Zwart
Sladdlängd:	3.05 m
Certifiering:	UL60950_1 ETL, CSA C22.2
Hållbarhetscertifikat:	RoHS
Förvaringstemperatur:	-15 - 45 °C
Strömspänningsskydd:	Overbelasting
Vikt (imperialistisk):	5.5 lbs
Höjd, drift:	0 - 3000 m
Höjd vid förvaring:	0 - 15000 m
Montage:	Horizontaal/Verticaal
Plugg:	NEMA L6-30P
Rackkapacitet:	0U
AC-ingångsfrekvens:	50 - 60 Hz
Drifttemperatur (TT):	0 - 35 °C
Relativ luftfuktighet i drift (VV):	0 - 95 procent
Mått (B x D x H) (brittisk):	1.75 x 1.5 x 24 "
Antal AC-utgångar:	16 AC-uitgang(en)
Nominell inspänning:	200-230 V
Uttagstyper:	C13 stekker
Ström (max.):	30 A
PDU-typer:	Basis
Nätspänning, i drift:	200-230 V