XO T1848KSE Bruksanvisning

XO Fläktkåpa T1848KSE

Läs nedan 📖 manual på svenska för XO T1848KSE (30 sidor) i kategorin Fläktkåpa. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/30
RANGE HOOD - User instructions
HOTTE DE CUISINE - Notice d’utilisation
CAMPANA EXTRACTORA - Manual de utilización
USA
F
E
XOT48KS
XOT1836KS
XOT1848KS
NEED HELP?
Call our ventilation experts toll free al 800-966-8300
AVEZ-VOUS BESOIN D’AIDE ?
Contactez nos experts au numéro gratuit 800-966-8300
¿NECESITA AYUDA?
Póngase en contacto con nuestros expertos a través del número gratis 800-966-8300
Proof of original purchase date and invoice is needed to obtain
service under warranty.
Limited 2 Year Warranty.
For 2 years from the original date of purchase, we will provide, free
of charge, parts and service labor in your home to repair or replace
any part of the hood that fails because of a manufacturing defect.
The warranty is extended to the original purchaser for products
purchased for ordinary home use in North America.
Should you require service for your XO product call a product
service specialist at 800.966.8300
Improper Installation.
Service trips to the home to teach you how to use the product.
Resetting circuit breakers.
Damage caused after delivery.
EXPECT MORE FROM XO
When buying any XO appliance
you can be condent
you have purchased a high quality,
innovative, and stylish product,
from a company who cares about you.
XO Hood Warranty
What is covered
What is not covered
- 3 -
IMPORTANT SAFETY INSTRUCTIONS.
FOR RESIDENTIAL USE ONLY.
READ AND SAVE THESE INSTRUCTIONS.
PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.
IMPORTANT: Save these Instructions for the Local Electrical Inspectors use.
INSTALLER: Please leave these Instructions with this unit for the owner.
OWNER: Please retain these instructions for future reference.
Take care when using cleaning agents or detergents.
Suitable for use in household cooking area.
WARNING - To reduce the risk of re or electric shock, do not use this fan with any
Solid-State Speed Control Device.
CAUTION - To reduce risk of re and to properly exhaust air, be sure to duct air outside
Do not vent exhaust air into spaces within walls or ceilings or into attics, crawl spaces,
or garages.
CAUTION - For general ventilating use only. Do not use to exhaust hazardous or
explosive materials and vapors.
CAUTION - To avoid motor bearing damage and noisy and/or unbalanced impellers,
keep drywall spray, construction dust, etc. o power unit.
CAUTION - Please read specication label on product for further information and
requirements.
WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
A. Use this unit only in the manner intended by the manufacturer. If you have questions,
contact the manufacturer.
B. Before servicing or cleaning unit, switch power o at service panel and lock the service
disconnecting means to prevent power from being switched on accidentally. When
the service disconnecting means cannot be locked, securely fasten a prominent warning
device, such as a tag, to the service panel.
WARNING - TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:
A. Never leave surface units unattended at high settings. Boilovers cause smoking and
greasy spillovers that may ignite. Heat oils slowly on low or medium settings.
B. Always turn hood ON when cooking at high heat or when ambeing foods (i.e. Crepes
ENGLISH USA
- 4 -
Suzette, Cherries Jubilee, Peppercorn Beef Flambè).
C. Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan
or lter.
D. Use proper pan size. Always use cookware appropriate for the size of the surface
element.
E. Keep fan, lters and grease laden surface clean.
F. Use high range setting on range only when necessary.Heat oil slowly on low to medium
setting.
G. Don t leave range unattended when cooking.
H. Always use cookware and utensils appropriate for the type and amount o food being
prepared.
WARNING TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE
TOP GREASE FIRE, OBSERVE THE FOLLOWINGa:
A. SMOTHER FLAMES with a close-tting lid, cookie sheet, or metal tray, then turn o
the burner. BE CAREFUL TO PREVENT BURNS. If the ames do not go out immediately,
EVACUATE AND CALL THE FIRE DEPARTMENT.
B. NEVER PICK UP A FLAMING PAN – You may be burned.
C. DO NOT USE WATER, including wet dishcloths or towels a violent steam explosion
will result.
D. Use an extinguisher ONLY if:
1. You know you have a Class ABC extinguisher, and you already know how to operate it.
2. The re is small and contained in the area where it started.
3. The re department is being called.
4. You can ght the re with your back to an exit.
aBased on “kitchen resafety tips” published by NFPA.
Proper maintenance of the Range Hood will assure proper performance of the unit.
INSTALLATION INSTRUCTIONS
WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
A. Installation work and electrical wiring must be done by qualied person(s) in accordance
with all applicable codes and standards, including re-rated construction.
B. Sucient air is needed for proper combustion and exhausting of gases through the
ue (chimney) of fuel burning equipment to prevent back drafting. Follow the heating
equipment manufacturers guideline and safety standards such as those published by
the National Fire Protection Association (NFPA), and the American Society for Heating,
Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.
C. When cutting or drilling into wall or ceiling, do not damage electrical wiring and
other hidden utilities.
D. Ducted fans must always be vented to the outdoors.
E. This unit must be grounded.
- 5 -
WARNING - TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK.
WARNING - UNDER CERTAIN CIRCUMSTANCES DOMESTIC APPLIANCES MAY BE
DANGEROUS.
A. Do not check lters with hood working.
B. Do not touch the lamps after a prolonged use of the appliance.
C. No food must be cooked ambè underneath the hood.
D. The use of an unprotected ame is dangerous for the lters and could cause res.
E. Watch constantly the fried food in order to avoid the cooking oil ares up.
F. Before performing any mainteinance operation, disconnect the hood from the electrical
service.
The manufacturers will not to accept any responsability for eventual damages, because
of failure to observe the above instructions.
- 7 -
WARNING FIRE HAZARD
NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces,
ceiling, attics or garages.
All exhaust must be ducted to the outside, unless using the recirculating option.
Use single wall rigid Metal ductwork only.
Fasten all connections with sheet metal screws and tape all joints w/ certied Silver
Tape or Duct Tape.
INSTALL THE DUCTWORK:
NOTE: to reduce the risk of re, use only metal ductwork.
1. Decide where the ductwork will run between the hood and the outside.
2. A straight, short duct run will allow the hood to perform most eciently.
3. Long duct runs, elbows, and transitions will reduce the performance of the hood.
Use as few of them as possible.
4. Install a roof or wall cap. Connect 8" round metal ductwork to cap and work
back towards hood location. Use duct tape to seal the joints between ductwork
sections.
Installation - Ducting Options
- 8 -
Min 27" - Max 32"
36"
8"
11" - 18" 1-5/16"
12"
8"
5-5/8"
3"
36" - 48"
22"
Hood Specications
PRODUCT DIMENSIONS AND CLEARANCE
XOT48KS - XOT1836KS - XOT1848KS:
Front of hood Side of hood
Top of hood Mounting height and clearance:
- 10 -
POWER SUPPLY:
IMPORTANT - (Please read carefully)
WARNING:
FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.
Remove house fuse or open circuit breaker before beginning installation. Do not use an
extension cord or adapter plug with this appliance. Follow National electrical codes or
prevailing local codes and ordinances.
Electrical supply:
These vent hoods must be supplied with 120V, 60Hz, and connected to an individual,
properly grounded branch circuit, and protected by a 15 or 20 amp circuit breaker or
time delay fuse.
tWiring must be 2 wire with ground.
tIf the electrical supply does not meet the above requirements, call a licensed
electrician before proceeding.
tRoute house wiring as close to the installation location as possible, in the ceiling or back
wall. Refer to Wiring Locations on page 11.
tConnect the hood wiring to the house wiring in accordance with local codes.
Grounding instructions:
The grounding conductor must be connected to a grounded metal, permanent wiring
system, or an equipment-grounding terminal or lead on the hood.
WARNING: the improper connection of the equipment-grounding conductor
can result in a risk of electric shock. Check with a qualified electrician or service
representative if you are in doubt whether the appliance is properly grounded.
- 11 -
2. CONNECT ELECTRICAL:
t1PXFS4VQQMZ$POOFDUJPO
For connection to the power supply refer to the following Fig.2:
1. Break and remove the small circular metal sheet positioned in the rear part of the hood,
with the aid of a at screw driver .1.Fig.2
2. Remove the power supply lid by loosening the 2 screws A Fig.2.2.
3. Connect the wires of the hood to those of the power supply as described Fig.2.3:
BLACK L = line
WHITE N = neutral
GREEN/YELLOW G = ground.
- A double-pole switch properly rated must be installed to provide the range hood power
supply disconnection.
- Connect the electrical conduit to the Field Wiring Compartment using listed onduit
ttings.
- Carry out the power supply connection in accordance with the national electric code,
ANSI/NFPA 70-1999.
4. Insert the wires into the box, then close the box cover, securing it using the screws that
were previously removed.
Fig.2
A
A
1
2
3
- 12 -
OPTIONAL: the electric power supply box can be removed and xed in the position
indicated in Fig.3A.
WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING: Before connecting the appliance to the power
supply network, the electric plant box must be positioned in the seat.
To move the electric power supply box, refer to that indicated in Fig.3A:
1. Loosen the two screws C Fig.3A.1.
2. Break and remove the small circular metal sheet positioned in the upper part of the
hood, with the aid of a at screwdriver Fig.3A.2.
3. Take the electric connection box and x it using the 2 screws C, previously removed, in
the position indicated in Fig.3A.3.
4. For the electric power supply connection refer to Fig.3B -Fig.3B.2 .3.
Fig.3
A
A
1
2
3
C
2
1
C
C
A
B
3
- 13 -
tThe appliance must be installed at a minimum height of 27" from an electric cooker stove,
or 32" from gas or combined cooker stoves. If a connection ductwork composed of two
parts is used, the upper part must be placed outside the lower part. Do not connect the
range hood exhaust duct air to the same duct air used to exhaust hot air or fumes from
other appliances other than electrical.
Min 27" - Max 32"
36"
3. CONNECT THE DUCTWORK:
- 14 -
tThis product can be installed in 2 dierent ways:
- Mounting the hood in the lower part of the shelf:
1 type installation Fig.4.
- Mounting the hood on the wall:
2 type installation Fig.4.
Fig.4
1
2
A
B
4
A
B
1

Produktspecifikationer

Varumärke: XO
Kategori: Fläktkåpa
Modell: T1848KSE

Behöver du hjälp?

Om du behöver hjälp med XO T1848KSE ställ en fråga nedan och andra användare kommer att svara dig




Fläktkåpa XO Manualer

XO

XO VD136SS Bruksanvisning

22 Februari 2025
XO

XO VD136SG Bruksanvisning

22 Februari 2025
XO

XO VV236KSE Bruksanvisning

21 Februari 2025
XO

XO VV230SC Bruksanvisning

21 Februari 2025
XO

XO VV248KSE Bruksanvisning

21 Februari 2025
XO

XO VV236SC Bruksanvisning

21 Februari 2025
XO

XO VW48SC Bruksanvisning

21 Februari 2025
XO

XO R230W Bruksanvisning

25 December 2024
XO

XO R30SC Bruksanvisning

26 Oktober 2024
XO

XO V42SC Bruksanvisning

26 September 2024

Fläktkåpa Manualer

Nyaste Fläktkåpa Manualer