XPG Gammix S7 Bruksanvisning
XPG
Solid State-enheter (ssd)
Gammix S7
Läs nedan 📖 manual på svenska för XPG Gammix S7 (4 sidor) i kategorin Solid State-enheter (ssd). Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/4
INSTALLING A M.2 SSD
ON A DESKTOP PC
1. GATHER THE THINGS YOU'LL
NEED
*Please use a standard Phillips screwdriver (3.5mm) for
disassembling the case; and a smaller Phillips screwdriver
for installing the M.2 solid state drive as it uses screws
with a diameter of 1.85-1.98mm
PC, Phillips screwdrivers, and ADATA M.2
SSD
2. BACK UP YOUR DATA
Make sure to backup the important data on
your PC to an external device, such as an
external HDD, before starting installation.
3. POWER OFF YOUR PC
After backing up your data, power off your PC
to avoid data loss or damage to other
components during installation.
4. SWITCH OFF THE POWER
SWITCH AND UNPLUG POWER
CORD
*The location of the power switch may vary by PC,
please check your user manual.
This action is necessary to discharge residual
power that can damage your PC and its
components.
BEFORE INSTALLATION
*The location of slots may vary by PC. Please check your
PC's user manual for more information.
**Generally speaking, the screws that secure the SSD in
place will be installed on the motherboard when the PC is
shipped from the factory.
* The slot has a foolproof design. Please insert the SSD
in the direction corresponding to the pins on the solid
state drive and the slot. Do not insert it forcibly to avoid
damage to the product.
INSTALLATION
Use the standard Philips screwdriver to remove
the screws and then remove the PC case
2. LOCATE THE M.2 PCIE SLOT
AND CONFIRM THERE ARE
SCREWS
Locate the M.2 PCIe slot, ensure the SSD will
fit, and confirm there are screws present.
3. ALIGN THE M.2 SLOT AND
INSERT THE SOLID STATE DRIVE
Use your small Phillips screwdriver to remove
the screws on the motherboard. Align the
notches in the SSD with the ridges in the PCIe
slot, then insert at a an angle. Give it a final
push to ensure it is securely in place.
4. FASTEN THE SCREWS TO
SECURE THE SSD
Use your small Phillips screwdriver to secure
the SSD into place.
1. REMOVE THE PC CASE
Produktspecifikationer
| Varumärke: | XPG |
| Kategori: | Solid State-enheter (ssd) |
| Modell: | Gammix S7 |
Behöver du hjälp?
Om du behöver hjälp med XPG Gammix S7 ställ en fråga nedan och andra användare kommer att svara dig
Solid State-enheter (ssd) XPG Manualer
19 September 2024
19 September 2024
19 September 2024
19 September 2024
19 September 2024
19 September 2024
19 September 2024
19 September 2024
19 September 2024
19 September 2024
Solid State-enheter (ssd) Manualer
- Solid State-enheter (ssd) Sony
- Solid State-enheter (ssd) Samsung
- Solid State-enheter (ssd) Philips
- Solid State-enheter (ssd) Toshiba
- Solid State-enheter (ssd) Aluratek
- Solid State-enheter (ssd) Sharkoon
- Solid State-enheter (ssd) IStorage
- Solid State-enheter (ssd) Gigabyte
- Solid State-enheter (ssd) SanDisk
- Solid State-enheter (ssd) LaCie
- Solid State-enheter (ssd) Goodram
- Solid State-enheter (ssd) Western Digital
- Solid State-enheter (ssd) Intel
- Solid State-enheter (ssd) Fantec
- Solid State-enheter (ssd) Seagate
- Solid State-enheter (ssd) ADATA
- Solid State-enheter (ssd) Centon
- Solid State-enheter (ssd) Edge
- Solid State-enheter (ssd) Crucial
- Solid State-enheter (ssd) Verbatim
- Solid State-enheter (ssd) Advantech
- Solid State-enheter (ssd) Kingston
- Solid State-enheter (ssd) PNY
- Solid State-enheter (ssd) DIGISTOR
- Solid State-enheter (ssd) Silicon Power
- Solid State-enheter (ssd) ATP
- Solid State-enheter (ssd) OWC
- Solid State-enheter (ssd) G-Technology
- Solid State-enheter (ssd) Glyph
- Solid State-enheter (ssd) Kingston Technology
- Solid State-enheter (ssd) SK Hynix
- Solid State-enheter (ssd) Patriot
- Solid State-enheter (ssd) HGST
- Solid State-enheter (ssd) Origin Storage
Nyaste Solid State-enheter (ssd) Manualer
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024