Yorkville Paraline PSA2S Bruksanvisning

Yorkville högtalare Paraline PSA2S

Läs nedan 📖 manual på svenska för Yorkville Paraline PSA2S (8 sidor) i kategorin högtalare. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
Owner’s Manual
Manuel de L’Utilisateur
PS
PS
PS
PSA2
A2
A2
A2s
s
s
s
1
Congratulations on your purchase of the PSA2s.
The PSA2s is a premium-quality integrated
subwoofer and power amplifier. It has been
designed to be the perfect complement to our
Paraline Series PSA1 powered speaker.
The line-level position is for use when the PSA2s
is fed a signal from a processor, electronic crossover, the
output of an un-powered mixer, or the loop-through of a powered
speaker cabinet. When using the line-level mode, the use of balanced
¼-inch (Tip, Ring, Sleeve) and/or XLR cables will reduce the unit’s sensitivity
to hum and buzz.
The speaker level position should be used when the PSA2s is fed with a ¼-inch speaker cable
from the output of an amplifier or a powered-mixer, or from the parallel connection on an un-powered
speaker cabinet. For speaker level operation, connect the PSA2s just like an ordinary speaker (in paral-
lel using the loop-through jacks) along with the passive full-range loudspeakers.
The PSA2s may be plugged in before or after the full-range loudspeaker. The PSA2s does not alter
the signal to the daisy-chained (thru) loudspeakers and will not draw any power from the host amplifier/
processor driving them. Also, note that an external crossover is not necessary when using the PSA2s.
At high power levels when the limiter is operating, increasing the subwoofer level control will not
increase the output. For the best results, set the system so that the limiter LED occasionally (a few
times per second) lights up. The limiter is present in the circuit at all times to prevent distortion and
to prevent over-excursion of the speakers.
Note: The PSA2s’ built-in stand mounting adapter can be used with the Yorkville SW-TUBEHD
accessory to support either one or two of our PSA1 cabinets. The support tube can be used safely
as long as the PSA2s is on a flat, level surface.
WARNING: Larger or heavier cabinets should NOT be used!
2
Specifications
Model PSA2s
System Type Active Bass Reflex Subwoofer
Program Power (watts) 2400W program (4800W peak)
Max SPL (dB) 134 Peak / 131 contnuous
Frequency Response (Hz +/- 3db) 30 – 100
Crossover Frequency (Hz) Fixed @ 100Hz
Driver Configuration 2 x 15-inch
LF Driver(s) 2 x 15-inch Ceramic Woofers w/ 3-inch voice coils
LF Impedance (ohms) 2x 8 ohms
LF Amplifier Type Class-D
Power Consumption (typ/max) 660VA/900VA (5.5A/7.7A@120V, 2.9A/3.9A@230V)
Enclosure Materials 15mm Birch
Baffle Materials 15mm Birch
Covering / Finish Urethane Paint (Black)
Dimensions (DWH xbackW, inches) 23.75 x 18 x 38
Dimensions (DWH xbackW, cm) 60.3 x 45.7 x 96.5
Weight (lbs/kg) 156/70.76
*specifications subject to change without notice
PS
PS
PS
PSA2
A2
A2
A2s
s
s
s

Produktspecifikationer

Varumärke: Yorkville
Kategori: högtalare
Modell: Paraline PSA2S

Behöver du hjälp?

Om du behöver hjälp med Yorkville Paraline PSA2S ställ en fråga nedan och andra användare kommer att svara dig




högtalare Yorkville Manualer

högtalare Manualer

Nyaste högtalare Manualer