Zempire Jetstream Bruksanvisning

Zempire tält Jetstream

Läs nedan 📖 manual på svenska för Zempire Jetstream (4 sidor) i kategorin tält. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
1. Clear your site making sure there are no
sharp objects where you are going to
pitch your tent. Try to get a site that is
as flat as possible.
2. Assemble the 8 pole sections.
Ensure that the poles are inserted
fully into the steel Ferrule connectors.
4.Thread the RED poles through
the pole sleeves that run diagonally
across the centre of the tent. Tension
the poles inserting the pins located
Directly underneath each pole
sleeve into the ends of the poles. It
may be easier to have someone to
support the crossover of the poles
during this step.
3. Firstly peg our the 4 corners of
the centre of the tent( ). Then peg
out each corner of the bedrooms( ).
Try to get the floor sitting as flat as
possible at each stage.
5. thread the GREEN poles through
the pole sleeves on either side of the
centre dome. Insert the pins into the
pole ends.
6. Thread the YELLOW poles through
the pole sleeves on either end of the
tent. Insert the pins into the
pole ends.
7. Thread the BLUE poles through
the pole sleeves at the front and
rear of the tent. Insert the pins into
the pole ends.
9. Pull the fly over the tent
and connect the SR buckle sewn
onto the fins at either side. Attach
the hooks onto the loops sewn
around the pole sleeves.
10. Peg out all the guy ropes. Try to have
guy ropes at a 45o angle to the ground.
PITCHING INSTRUCTIONS - JETSTREAMairflowseries
8. Peg out all remaining peg points
around the tent. Firmly peg out the
ORANGE webbing straps
attached to the large fins at either
side of the tent. Also peg out lower
vents at this stage.
2x
2x
2x
2x
Copyright 2014
pitching instructions
JETSTREAM
Freedom Zempire is proud to be a 100%
New Zealand owned and operated
business.
For more information about this and
other great products we offer please
visit our website.
WWW.FREEDOMCAMPING.COM
PITCHING INSTRUCTIONS - JETSTREAMairflowseries
11. For extra warmth and privacy
you may decide to attach the
inner tents inside the tent. Lay
out the inner inside the tent with
the door facing the front and the
floor facing downwards. Attach
the corner male buckles to the
female buckles sewn into the
inside rear corners of the tent.
Connect the toggles through the
corresponding rings sewn on the
tent working your way front the
rear to the front of the inner. Peg
down the front of the inners and
cover.
airflowseries
1. Ensure guy ropes are pegged out at all times during use
2. Never pack your tent away wet. If you must take your tent down when
wet, ensure that you dry you tent completely as soon as possible to
prevent mildew forming.
3. If mildew does form on your tent wash off pours with warm water and a
soft brush to prevent further growth. Do not use detergents.
4. Do not use an open flame inside your tent. The fabric has been treated
with a fire retardant but is in no way fire proof
5. Clean all pegs and poles before storing
6. If your poles do break, use the repair sleeve to cover over the broken
section. Once you have returned contact your local retailer for a
replacement pole section.

Produktspecifikationer

Varumärke: Zempire
Kategori: tält
Modell: Jetstream

Behöver du hjälp?

Om du behöver hjälp med Zempire Jetstream ställ en fråga nedan och andra användare kommer att svara dig




tält Zempire Manualer

tält Manualer

Nyaste tält Manualer