Absima CR6S Bruksanvisning

Absima Fjärrkontroll CR6S

Läs nedan 📖 manual på svenska för Absima CR6S (6 sidor) i kategorin Fjärrkontroll. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/6

14+ This product is only for 14 years

old or above

WARNING:

Introduction to your Absima CR6S 2.4 GHz remote control

Thank you for choosing a remote control from Absima.

You get an absolute high performance product with state-of-the-art functionality.

Please read the instruction manual carefully before using it for the ﬁrst time. The basic safety and warning instructions

are an integral part of these instructions and form the basis for handling the product. In this way, you avoid damage

that may result from improper use. Keep the operating instructions (printed and/or in PDF format) handy and pass

them on to the buyer when the product is sold.

Safety instructions and warnings

Operation of remote-controlled models can result in damage to property and personal injury. Liability insurance is

compulsory in many EU countries. If you are not sure whether your liability insurance covers the operation of

remote-controlled models, please contact your insurance company. Unauthorized modiﬁcations to your Absima

product are prohibited, as they are dangerous and may cause damage to the device or persons. Only use original

accessories and spare parts. Again the appeal! Please do not put the device into operation until you have carefully

read these operating instructions and the following safety instructions.

Remote-controlled models have a considerable hazard potential. The construction and installation of the RC system

as well as its operation require technical understanding, care and safety-conscious, responsible behaviour. Errors or

improper use can result in considerable damage and serious injuries. A model that is out of control for any reason

can cause serious damage to property or personal injury.Moving parts must be smooth-running.

Cables and connections must not be damaged.

This product is not suitable for children under the age of 14.

If you operate the device in conjunction with products from other manufacturers, check their quality and functionality.

Each new or changed constellation must be subjected to a careful function and range test before commissioning.

Do not operate the device or model if its functionality appears to be impaired. Absima assumes no responsibility

and/or liability for third party products.

Conﬁgure a new model with the necessary care and peace of mind. Make sure that the drive of the model cannot start

unintentionally. Check all functions. Familiarize yourself fully with the operation of the transmitter before putting the

model into full operation.

Note that rapid temperature changes may cause condensation to form in the transmitter. In general, humidity can

affect the operation of the transmitter and other components of the remote control system. In the event of moisture

in electrical appliances, stop operation immediately, disconnect the power supply and allow the appliance to dry out

(up to a few days) when open. Then carry out a careful function test.

You must always have visual contact with your model. In fog, heavy rain, snowfall and at night you should refrain

from operating your model.

Never operate your model when you are tired or under the inﬂuence of alcohol or medication.

Never leave the remote control in the blazing sun.

Intended use: the CR6S remote control system is intended exclusively for the remote control of models.

We reserve the right to change design, speciﬁcations and usage requirements without notice.

Always observe the switch-on and switch-off sequence in order to avoid uncontrolled and dangerous starting of

the drive!

Switching on / Commissioning: 1. Switch on transmitter / 2. Connect drive battery / 3. Switch on model

Switch off / shut down: 1. Switch off model / 2. Disconnect drive battery / 3. Switch transmitter off

Please observe these points when operating your model:

• Operate model only on suitable surfaces

• It is essential to keep sufﬁcient distance from other persons. Do not endanger other persons,

animals or objects. Operate your model only in private places or in places specially approved for this purpose.

• Do not carry out any risky driving manoeuvres near persons.

• Include your own skills and abilities - please do not overestimate yourself.

• If there are signs of malfunctions or problems, please stop immediately and stop driving.

2.4GHz FHSS technology, 6 channels frequency-hopping spread spectrum, highly resistant to anti-jamming.

Receiver response time is 3ms, ensuring a fast response and better control.

Smooth and highly sensitive to control inputs and stable at distances 400-500m

Compatible with a variety of vehicles; suitalbe for RC cars, RC boats and RC tanks...etc.

With brake and fail safe out of control protection function.

Each 3 channels can be set respectively, supporting mixed control for 1 and 2 channels.

Voltage range of transmitter: 4.8V - 12V (support 1s-3s battery), automatic identiﬁcation of voltage,

low voltage warning on 7.4V/4.8V

Voltage range of receiver: 3.3V-10V, working current 30mA, supports high voltage servo.

Unique throttle speed limit adjustment function, allows beginners to practive at a safe speed.

Channel 5 and 6 press for lock and press for release, function specially for Crawler accessories.

FEATURES:

CHANNEL FUNCTION:

CH1: Reverse for steering

CH1: Sub-trim for steering

CH1: EPA for steering

CH2: Reverse for throttle

CH2: Sub-trim for throttle

CH2: EPA for throttle

Channel 5 Channel 6

Antenna

Channel 1 (Steering)

Channel 2 (Throttle)

Channel 3

Battery case

Channel 4

Power

On / Off

Simulator/

PPM interface USB Connection

(only for up to 5V MAX.)

BASIC OPERATION:

Battery installation:

1. Open the battery compartment cover.

2. Insert 4 x ”AA” batteries or 2S Li-Po batteries

with correct polarity. (No response if batterypolarity reversed)

3. Put back battery compartment cover

The battery socket is equipped with

anti-reverse insertion function,

wrong polarity connecton will not

damage the transmitter.

2S Li-Po rechargable battery pack

Binding process:

1. Power on Transmitter

2. Power on Receiver and press button on side of receiver,

LED indicator fast ashing means entering into

binding mode, the receiver will automatically

searching for the nearest transmitter signal for

Binding.

3 . The indicator will always ON after

successful bound.

Binding button

Rope

Produktspecifikationer

Varumärke:	Absima
Kategori:	Fjärrkontroll
Modell:	CR6S
Färg på produkten:	Zwart, zilver
Vikt:	8200 g
Bredd:	420 mm
Djup:	610 mm
Höjd:	89 mm
Förpackningens vikt:	10100 g
Förpackningens bredd:	548 mm
Djuppackning:	750 mm
Förpackningshöjd:	120 mm
Snäll:	Verstelbare plank
Husmaterial:	Staal
Monteringsverktyg:	Ja
Maximal viktkapacitet:	22.7 kg
Hållbarhetscertifikat:	CE, RoHS
(Ytter) huvudpaketets höjd:	120 mm
(Ytter) huvudförpackningens bredd:	548 mm
(Ytre) huvudpaketets längd:	750 mm
Kvantitet per (yttre) huvudkartong:	1 stuk(s)
Rackkapacitet:	2U
Harmoniserad systemkod (HS):	85389099
Installationsdjup (max):	802 mm
Installationsdjup (min):	702 mm