Acti A711 Bruksanvisning

Acti Inte kategoriserad A711

Läs nedan 📖 manual på svenska för Acti A711 (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

A711 Outdoor Hemispheric Dome Quick Installation Guide

The Quick Guide is for quick installing connecting the Outdoor Hemispheric Dome Camera. For more details, please refer to the User’s Manual of the camera.and

Installation Notices

• This camera must be installed by qualified personnel and the installation should conform to all local codes.

• Do not replace batteries of the camera. Risk of explosion may occur if the battery is replaced by an incorrect type.

• Leaving a camera in an extremely high temperature surrounding environment can result in an explosion or the

leakage of flammable liquid or gas.

• Camera subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or

gas.

• Use only power supply and other accessories recommended by the manufacturer.

• The power cord of the adapter should be connected to a socket-outlet with earthing connection.

Camera Overview

No.

Connector

Definition

Remarks

Audio I/O

Pink

Audio In (Line In)

Two-way audio transmission

Green

Audio Out (Line Out)

Alarm I/O

(4-Pin Terminal

Block)

Alarm In –

Alarm connection

* Do connect external power NOT

supply to the alarm I/O connector of

the camera.

Alarm In +

Alarm Out –

Alarm Out +

Power (DC 12V)

(2-Pin Terminal

Block)

Black

DC 12V –

Power connection

Red

DC 12V +

RJ-45

For network and PoE connections

microSD Card Slot

Insert the microSD card into the card slot to store videos and snapshots.

Do not remove the microSD card when the camera is powered on.

Reset Button

Press the button with a proper tool for at least 20 seconds to restore the

system.

NOTE: It is not recommended to record with the microSD card for 24/7 continuously, as it may not be able to

support long term continu s data read/write. Please contact the manufacturer of the microSD card for ou

information regarding the reliability and the life expectancy.

Camera Cabling

Please follow the instructions below for cable connections.

Power Connection

Please use a DC 12V power adaptor and plug it to the camera and the power outlet. Alternatively, users can use an

Ethernet cable and connect it to the RJ-45 connector of the camera and a Power Sourcing Equipment (PSE) switch.

NOTE: If the device is powered over Ethernet, make sure the PSE is connected to the network.

Ethernet Cable Connection

Connect one end of the Ethernet cable to the - connector of the camera, and plug the other end of the cable to RJ 45

the network switch or PC.

NOTE: In some cases, Ethernet crossover cable might be needed when connecting the camera directly to the

PC.

NOTE: Check the status of the link indicator and activity indicator LEDs. If the LEDs are unlit, please check

the LAN connection.

Green Power LED : Lights up when the camera is powered up.

Orange Network LED (1) flashes when data is being transmitted over network,:

(2) lights up for good network connection.

NOTE: The ITE is to be connected only to PoE networks without routing to the outside plant or equivalent

description.

Before Login to the Camera

A client program will be automatically installed to the PC when connecting to the camera. Before logging in to the

camera, ensure downloading the ActiveX control is allowed by either changing the ActiveX controls and plug-ins or

setting Internet’s security level to default.

ActiveX Controls and Plug-ins Settings

Internet Security Level

Step 1: Start the Internet Explorer (IE).

Step 2: Select <Tools> from the main menu of the

browser. Then click on <Internet Options>.

Step 3: Click on the <Security> tab and select

<Internet>, and click on <Custom level> to

change ActiveX settings.

Step 4: Set “ActiveX controls and plug-ins” items to

<Prompt> or <Enable>.

Step 1: Start the Internet Explorer (IE).

Step 2: Select <Tools> from the main menu of the

browser. Then click on <Internet Options>.

Step 3: Click on the <Security> tab and select

<Internet>.

Step 4: Down the page, click <Default Level> and click

on <OK> to confirm the setting. Close the

browser window, and open a new one later for

accessing the IP camera.

V20230720

Camera Login

The default IP address of the camera is: 192.168.0.100 Therefore, to access the camera for the first time, please set

the IP address of the PC as: 192.168.0.XXX; for example:

IP Address: 192.168.0.99

Subnet Mask: 255.255.255.0

• Type in corresponding camera IP address into the URL field on the web browser and hit "Enter".

• For initial login, use the default username, “admin”, and then setup the password. Follow the on-screen instructions

to do so. This username and password will be used for succeeding login. Note that the username and password

are case sensitive.

Default Username admin: Password: (user must setup first)

Install the ActiveX Control

• After connecting to the camera, the request for installing the ActiveX control will appear just below the URL bar.

• Right click on the information bar, and then click on <Install ActiveX Control…> to permit ActiveX control installation.

• In the pop-up security warning window, click on <Install> to start downloading the software on the PC.

• Click on <Finish> after installation is completed.

Browser-based Viewer

The main page of the IP camera user interface is shown as the figure below. Actual features may vary depending on

model.

A711

Outdoor Hemispheric Dome Camera

Quick Installation Guide

Produktspecifikationer

Varumärke:	Acti
Kategori:	Inte kategoriserad
Modell:	A711

Behöver du hjälp?

Om du behöver hjälp med Acti A711 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Inte kategoriserad Acti Manualer

Acti SMAX-0100 Bruksanvisning

27 Oktober 2024

Acti VMGB-359 Bruksanvisning

24 September 2024

Acti ACD-2200 Bruksanvisning

23 September 2024

Acti A426 Bruksanvisning

23 September 2024

Acti A711 Bruksanvisning

23 September 2024

Acti A713 Bruksanvisning

23 September 2024

Acti A826 Bruksanvisning

23 September 2024

Acti A952 Bruksanvisning

23 September 2024

Acti ACD-2000QT Bruksanvisning

23 September 2024

Acti ACD-2000Q Bruksanvisning

23 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024

Manhattan 461504 Bruksanvisning

27 Oktober 2024

Sungrow SG125HV Bruksanvisning

27 Oktober 2024

Schneider CCT724319 Bruksanvisning

27 Oktober 2024

Technoline WS 250 Bruksanvisning

27 Oktober 2024

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024

Kupper 12152 Bruksanvisning

27 Oktober 2024

JennAir CARBON24L Bruksanvisning

27 Oktober 2024

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024