Acti PMAX-1105 Bruksanvisning

Läs nedan 📖 manual på svenska för Acti PMAX-1105 (25 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/25
Indoor Zoom Box
Mounting the Wall on
using an Indoor Bracket
Installation Guide
For Models:
B2x, I2x
2014/11/11
www.acti.com
Installation Guide
2
Table of Contents
Before Installation 3...................................................
Connecting a Power Adapter (Optional) .................................................. 3
Connecting the DI/DO and Audio Devices (Optional) ............................. 5
How to Connect DI/DO Devices .............................................................. 5
How to Connect Audio Devices ............................................................... 8
Connecting a Serial Device (Optional) ..................................................... 9
Indoor Installation Procedures ............................ 11
Step 1: Mount the Indoor Bracket ........................................................... 11
Step 2: Attach the Camera to the Bracket ............................................. 12
Step 3: Connect the Cable(s) .................................................................. 14
Step 4: Access the Camera Live View .................................................... 15
Other Accessories ................................................ 16
How to Install / Remove the Memory Card ............................................ 16
How to Insert the Memory Card ............................................................ 16
How to Remove the Memory Card ........................................................ 16
Accessing the Camera ......................................... 17
Congure the IP Addresses .................................................................... 17
Access the Camera .................................................................................. 21
Safety Information ................................................ 23
www.acti.com
Installation Guide
3
Before Installation
This section describes the procedures in preparing the external devices that you can connect to
the camera. The camera supports DC12V power input, Digital Input and Output (DI/DO), Audio
Input and Output devices, as well as Serial Devices like a Pan-Tilt (PT) Scanner using the
bundled terminal blocks. The use of these devices, however, is optional.
Connecting a Power Adapter (Optional)
In case of using a non-PoE switch or your PoE switch has limited power supply, you can
purchase a power adapter and directly connect the camera to a power outlet. The power adapter
must be connected to the supplied terminal block before use.
To do this, follow the procedures below:
1. Loosen the screws of the and pins of the power terminal block. 12V GND
2. Take note that a standard power adapter cable has two (2) dierent wires:
White stripe: Connects 12V Pin to
Connects to GND Pin

Produktspecifikationer

Varumärke: Acti
Kategori: Inte kategoriserad
Modell: PMAX-1105

Behöver du hjälp?

Om du behöver hjälp med Acti PMAX-1105 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Acti Manualer

Acti

Acti VMGB-359 Bruksanvisning

24 September 2024
Acti

Acti ACD-2200 Bruksanvisning

23 September 2024
Acti

Acti A426 Bruksanvisning

23 September 2024
Acti

Acti A711 Bruksanvisning

23 September 2024
Acti

Acti A713 Bruksanvisning

23 September 2024
Acti

Acti A826 Bruksanvisning

23 September 2024
Acti

Acti A952 Bruksanvisning

23 September 2024
Acti

Acti ACD-2000QT Bruksanvisning

23 September 2024
Acti

Acti ACD-2000Q Bruksanvisning

23 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer