AcuRite Home Comfort Monitor 01523 Bruksanvisning

AcuRite Väderstation Home Comfort Monitor 01523

Läs nedan 📖 manual på svenska för AcuRite Home Comfort Monitor 01523 (2 sidor) i kategorin Väderstation. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

Dial Thermometer

The dial thermometer is designed for indoor use only and will provide an accurate

measurement of air temperature in the vicinity of the instrument.

Dial thermometers are operated by sensitive bi-metal coil spring mechanisms that

respond to air temperature changes. The thermometer instrument has been

calibrated at the factory and should not need adjustment. As with all instruments

that are placed in a new location, you should always allow a period of several hours

for stabilization before determining whether it is reading accurately. Should you

determine that an adjustment of the thermometer is needed, this can be achieved by

using a small head screwdriver. On the back of the thermometer is a small hole

which will allow you to manually calibrate the temperature.

Insert the screwdriver head into the gold slot and turn clockwise or counter-clockwise

until the indicator hand is pointing to the known temperature reading.

Hygrometer (Humidity Meter)

Hygrometers measure relative air moisture percentage indoors. These instruments

operate by a sensitive coil spring that is bonded with a moisture absorbent material.

Hygrometers register the percentage of water vapor present compared to the

maximum amount that could be present at that air temperature. This is why the

instruments are also referred to as Humidity Meters. All air contains microscopic

water particles that are invisible to the human eye. If enough water is vaporized into

the air, the air will become “saturated”. This is considered to be 100% humidity.

The coils in hygrometers respond slowly and when humidity levels change abruptly, it

can take an hour or more for the meter to reach an accurate reading. Remember

that the hygrometer is reading indoor humidity, not the outdoor humidity as reported

by the weather service.

It is not uncommon to have low humidity readings during cold weather when indoor

air is heated. Humidity readings of 10% to 25% are typical where humidifiers are not

used to add water vapor into the air. The optimum humidity levels should be

maintained between 45% and 50% during heating seasons. Low humidity levels can

cause health problems and can be hard on wood furnishings.

Acurite® hygrometers are preset at the factory and typically should need no further

adjustment. Remember to allow ample time for the instrument to stabilize in its new

location before determining whether accurate humidity levels are being indicated. If you

do decide that the instrument needs re-adjustments, this can be done as follows:

Soak a folded face cloth or dish cloth with water and place the cloth on a plate, saucer or

another relatively flat container. Remove the hygrometer from the home comfort monitor

plaque by simply placing your hand against the back plate and pushing the instrument out

3 • How your home comfort monitor works

Home Comfort Monitor

01523

Instruction Manual

Package Contents:

(1) Home Comfort Monitor (A)

(1) Instruction Manual

A. Home Comfort Monitor

INST - 01523 100809

1 • Choosing the correct location

Thank You for purchasing this ACURITE® product. To fully

understand and appreciate your new home comfort monitor, please

read this document carefully.

Acurite® home comfort monitors are designed for indoor use only. They should be

placed on inside walls and away from heat registers, air conditioners, humidifiers,

and out of direct sunlight as these locations may affect the accuracy of the

thermometer and hygrometer instruments.

Mount your weather station on the wall

The Acurite® home comfort monitor has keyhole slots cut into the backside for

hanging. Use a securely anchored screw, nail or hook to support the weight of the

home comfort monitor. Make certain the screw/nail head is large enough to prevent

the monitor from slipping off in the event it is jarred or bumped.

2 • Care and cleaning of your home comfort monitor

Wood Plaque

The solid wood plaque is finished with a clear satin lacquer to protect and preserve

the appearance. Although occasional use of a good furniture paste wax is acceptable,

we recommend that periodic cleaning with a very lightly dampened soft cloth is best.

Be sure to wipe the wood dry with a soft cloth after cleaning.

Instruments

Avoid use of harsh household cleaners and coarse paper towels which would damage

the lacquer coating on the bezel and scratch the lens. Fingerprints and dirt may be

removed from the lenses and bezels with a soft cloth lightly dampened with a mixture

of water and mild dish washing liquid. Be sure to dry the lens and bezel with a soft

cloth after cleaning.

of its mounting hole. Carefully lay the back edge of the hygrometer flat on the damp cloth.

Allow 30-45 minutes for the hygrometer to read approximately 95% humidity, If the

reading is not indicated, carefully rotate the coil by using a small head screwdriver counter

clockwise until the indicator hand is reading 95%.

Remount the hygrometer into the wood plaque. The hygrometer will gradually return to

indicate the actual condition of the air moisture content. IMPORTANT: Any other method

than what has been described to adjust the hygrometer could damage the instrument.

Dial Barometer

Acurite® barometers indicate barometric pressure by measuring changes in a small

chamber that has a partial vacuum. As atmospheric pressure varies on the chamber

and changes shape, it moves a small drive linkage connected to the indicator hand.

This linkage movement rotates the hand to register changes in pressure.

Unlike the thermometer and hygrometer instruments, the barometer is not affected

by location. Because all buildings have some air leakage, the atmospheric pressure

is the same indoors as it is outdoors.

The barometer has been regulated at the factory to function accurately at 950 ft.

above sea level. If the altitude in your location is different, the barometer must be

re-adjusted or reset using either of the following methods:

1. Contact your local radio/TV/internet weather service to get the correct barometric

pressure reading for your location. Now set your barometer to that reading by using a

blade screwdriver to turn the small adjustment screw located in the back of the

barometer instrument case. Turn the screw to the left or right until the indicator

hand moved in the direction you want. Continue to turn the screw until the indicator

hand is registering the correct pressure. Lightly tap the center of the lens to make

sure that the “adjustable pointer” is moving freely. This ensures that friction from the

linkage is not affecting a correct reading by the indicator. CAUTION: Be careful not to

force the adjustment screw. If the screw becomes tight in either direction, the end of

the adjustment range has been reached.

2. Use an existing barometer at your location which is known to be accurate and set

the new Acurite® barometer to the same reading using the same procedure as

outlined in step one.

The capability of a barometer to indicate changes in atmospheric pressure makes it a

valuable instrument in weather forecasting. You should take a reading at least once

daily, and always rotate the “adjustable pointer” to the exact location of the indicator

hand at the time of your reading. The “adjustable pointer” will allow you to tell what

changes in pressure have occurred since your last reading. Remember that the rate

of pressure change is just as important as the amount of change. This is why

multiple readings each day are best for accurate weather forecasting.

For the most accurate atmospheric pressure reading, it is a good idea to first lightly

tap the lens before checking the exact position of the indicator hand on the dial.

The following meteorological “Rules of Thumb” will help you interpret your Acurite

barometer readings.

1. A rise in barometric pressure typically indicates clearing weather can be expected

2. A rapid drop in barometric pressure typically indicates that weather disturbances

are nearby and could result in precipitation

3. A slow but continuous drop in barometric pressure typically indicates that

persistent bad weather can be expected

4. Steep pressure drops typically indicates approaching storms with strong winds

Remember that many factors determine actual weather conditions. Geographic

location, temperature, humidity, wind direction and even the season must be

considered when your barometer indicates a rising or falling atmospheric pressure.

LIMITED WARRANTY-INTERNATIONAL - Consumer may have more remedies at law

than follows. Chaney Instrument Co. warrants to the owner, this product to be free from

material and workmanship for one year from date of purchase. Chaney Instrument shall NOT

BE LIABLE FOR ANY ACCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER

ARISING IN CONTRACT OR TORT. Chaney Instrument’s obligation (at it’s option) is limited to

repair or replace this product. For in-warranty repair, send product, accompanied by

Guarantee, bearing Dealer’s name and date of purchase, with $5.00 to cover handling and

postage to:

Chaney Instrument Company

965 Wells Street

Lake Geneva, WI 53147

Please DO NOT return product to the retail store.

For technical assistance and product return

information, please call Customer Care:

877-221-1252

Mon. - Fri. 8:00 A.M. to 4:45 P.M. (CST)

www.chaneyinstrument.com

Produktspecifikationer

Varumärke:	AcuRite
Kategori:	Väderstation
Modell:	Home Comfort Monitor 01523

Behöver du hjälp?

Om du behöver hjälp med AcuRite Home Comfort Monitor 01523 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Väderstation AcuRite Manualer

AcuRite 00503 Bruksanvisning

3 September 2024

AcuRite 02077 Bruksanvisning

30 Augusti 2024

AcuRite 02016 Bruksanvisning

28 Augusti 2024

AcuRite Home Comfort Monitor 01523 Bruksanvisning

26 Augusti 2024

AcuRite 00509 Bruksanvisning

26 Augusti 2024

AcuRite Iris 06014 Bruksanvisning

25 Augusti 2024

AcuRite Intelli-Time Alarm Clock 13040 Bruksanvisning

14 Augusti 2024

Väderstation Manualer

Nyaste Väderstation Manualer

Ascot GT-WS-07s Bruksanvisning

20 Oktober 2024

Ventus K0382 Bruksanvisning

18 Oktober 2024

Hyundai WSP 3080 Bruksanvisning

15 Oktober 2024

La Crosse Technology V61 Bruksanvisning

8 Oktober 2024

Cresta WX580M Bruksanvisning

6 Oktober 2024

Sencor SWS 65 Bruksanvisning

5 Oktober 2024

Irox JKR-1 Bruksanvisning

5 Oktober 2024

TFA 30.5002 Bruksanvisning

5 Oktober 2024

TFA WeatherHub 30.3306.02 Bruksanvisning

4 Oktober 2024

Jung WS10R Bruksanvisning

4 Oktober 2024