Ade Hanse 250 Bruksanvisning
Ade
Skärmaskin
Hanse 250
Läs nedan 📖 manual på svenska för Ade Hanse 250 (20 sidor) i kategorin Skärmaskin. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/20
OPERATING MANUAL
Gravity-Fed Slicer
Series HANSE
Hanse-210614-Rev008-UM-en
1 Hanse-210614-Rev008-UM-en
CONTENTS
1. PREFACE ............................................................................................................................. 2
1.1 Introduction ............................................................................................................................ 2
1.2 Usage .................................................................................................................................... 2
2. COMISSIONING .................................................................................................................... 3
2.1 Opening the package ............................................................................................................. 3
2.2 Installation ............................................................................................................................. 3
2.3 Electrical supply ..................................................................................................................... 3
2.4 Operation ............................................................................................................................... 4
3. OPERATING FUNCTIONS AND SAFETY REQUIREMENTS ............................................... 4
3.1 Operating Functions .............................................................................................................. 4
3.2 Mechanical Safety Devices .................................................................................................... 4
3.3 Acceptance test ..................................................................................................................... 4
4. USING THE MEAT SLICING MACHINE ................................................................................ 5
4.1 Operating procedure .............................................................................................................. 5
5. SERVICING AND MAINTENANCE OF THE MEAT SLICING MACHINE ............................... 6
5.1 Cleaning ................................................................................................................................ 6
5.2 Lubrication ............................................................................................................................. 6
6. BLADE SHARPENING PROCEDURE ................................................................................... 7
6.1 Grinding the blade ................................................................................................................. 7
7. TRAINING ............................................................................................................................. 8
8. CLEANING AND SERVICING ............................................................................................... 8
9. WARRANTY .......................................................................................................................... 8
10. TECHNICAL DATA ................................................................................................................ 9
11. CE Marking and Declaration of Conformity .......................................................................... 10
12. CIRCUIT DIAGRAMS .......................................................................................................... 11
13. EXPLODED VIEW ............................................................................................................... 13
14. SPARE PARTS LIST ........................................................................................................... 15
Hanse-210614-Rev008-UM-en 2
1. PREFACE
This symbol means: "Consult operating instructions". Read the instructions for use
carefully before use and follow all instructions provided therein. Keep the instructions
for use for future reference.
- This manual has been written to comply with the requirements of the current version of the Euro-
pean Machinery Directive.
This manual is provided by the manufacturer as a means of informing the customer about the
basic working principles, maintenance requirements and safety devices of the machine in a clear
and easily understood form.
- Although these meat slicing machines being continually improved, these developments will not
affect the validity of the instructions and information provided in this manual.
- This manual must have been thoroughly read before the meat slicing machine is taken into oper-
ation.
- If this manual should become worn with use or lost then a copy is to be ordered from the manu-
facturer as quickly as possible.
- As the majority of accidents and injuries occurring when these machines are being used result
from insufficient knowledge, the instructions and information contained in this manual should be
read without fail before starting to work with the machine.
1.1 Introduction
These meat slicing machines are designed to meet the requirements of the current safety standards.
This is signified by the "CE" marking placed on each of our meat slicing machines to indicate its
conformity with the above-mentioned standards.
1.2 Usage
These meat slicing machines are intended for cutting cooked and raw sausage, warm or cold meat,
cheese and bread. The maximum cut thickness is 15 mm.
The machines are suitable for up to 60 guests (Hanse 250) or up to 100 guests (Hanse 300). These
numbers should be seen as recommendations, based on experience and may vary depending on the
exact use to which the machines are put. The maximum duty cycle is 40 % (i.e. 24 minutes in 1 hour).
After this time has elapsed the motor must be allowed to cool down. Correspondingly shorter cool-
down intervals are required when the machine is switched on for shorter periods.
These machines may only be used in their original condition or when equiped with original spare
parts. The safety devices may not be removed. A machine must immediately be taken out of opera-
tion in the event of one of its safety devices being damaged and ADE then informed of the replace-
ment and/or spare part requirement.
These meat slicing machines may not be used under any conditions to cut deep-fro-
zen products, meat or sausages with bones or stone fruit.
Failing to observe these instructions may result in machines being seriously dam-
aged and the negation of any entitlement to guarantee.
Produktspecifikationer
| Varumärke: | Ade |
| Kategori: | Skärmaskin |
| Modell: | Hanse 250 |
Behöver du hjälp?
Om du behöver hjälp med Ade Hanse 250 ställ en fråga nedan och andra användare kommer att svara dig
Skärmaskin Ade Manualer
24 September 2024
24 September 2024
24 September 2024
16 September 2024
16 September 2024
16 September 2024
3 September 2024
2 September 2024
20 Augusti 2024
15 Augusti 2024
Skärmaskin Manualer
- Skärmaskin Electrolux
- Skärmaskin Bosch
- Skärmaskin Kenwood
- Skärmaskin Unold
- Skärmaskin Tefal
- Skärmaskin Ambiano
- Skärmaskin Ariete
- Skärmaskin Bartscher
- Skärmaskin Toolland
- Skärmaskin Orbegozo
- Skärmaskin Princess
- Skärmaskin Brother
- Skärmaskin Ozito
- Skärmaskin Gude
- Skärmaskin Fagor
- Skärmaskin Severin
- Skärmaskin Gorenje
- Skärmaskin Silvercrest
- Skärmaskin Makita
- Skärmaskin FAC
- Skärmaskin Korona
- Skärmaskin Saturn
- Skärmaskin Black And Decker
- Skärmaskin Tristar
- Skärmaskin Domo
- Skärmaskin Trisa
- Skärmaskin Livoo
- Skärmaskin Skil
- Skärmaskin Hyundai
- Skärmaskin Bestron
- Skärmaskin Oster
- Skärmaskin ECG
- Skärmaskin Jata
- Skärmaskin Melissa
- Skärmaskin Magic Chef
- Skärmaskin Swan
- Skärmaskin Clatronic
- Skärmaskin Fritel
- Skärmaskin Russell Hobbs
- Skärmaskin Sencor
- Skärmaskin Cuisinart
- Skärmaskin Blaupunkt
- Skärmaskin Concept
- Skärmaskin Sunbeam
- Skärmaskin Hikoki
- Skärmaskin Dremel
- Skärmaskin Ernesto
- Skärmaskin Beper
- Skärmaskin Hendi
- Skärmaskin Heinner
- Skärmaskin Eldom
- Skärmaskin Philco
- Skärmaskin Trebs
- Skärmaskin Mach
- Skärmaskin H.Koenig
- Skärmaskin Perel
- Skärmaskin GOTIE
- Skärmaskin Beem
- Skärmaskin Exquisit
- Skärmaskin Proline
- Skärmaskin Zelmer
- Skärmaskin Nutrichef
- Skärmaskin Genius
- Skärmaskin ETA
- Skärmaskin Bomann
- Skärmaskin Powerplus
- Skärmaskin Graef
- Skärmaskin Ufesa
- Skärmaskin Rommelsbacher
- Skärmaskin Wilfa
- Skärmaskin Presto
- Skärmaskin Boss
- Skärmaskin Camry
- Skärmaskin Sammic
- Skärmaskin Bifinett
- Skärmaskin Primo
- Skärmaskin Clas Ohlson
- Skärmaskin Gastroback
- Skärmaskin Powerfix
- Skärmaskin Saro
- Skärmaskin MPM
- Skärmaskin Rotel
- Skärmaskin Ices
- Skärmaskin Hobart
- Skärmaskin RGV
- Skärmaskin Team
- Skärmaskin ProfiCook
- Skärmaskin Nevir
- Skärmaskin CaterChef
- Skärmaskin G3 Ferrari
- Skärmaskin Magimix
- Skärmaskin Efbe-schott
- Skärmaskin Gourmetmaxx
- Skärmaskin Makeblock
- Skärmaskin Turmix
- Skärmaskin Ritter
- Skärmaskin OXO
- Skärmaskin Cigweld
- Skärmaskin Nesco
- Skärmaskin Waves
- Skärmaskin Coline
- Skärmaskin JAC
- Skärmaskin De Buyer
- Skärmaskin Cecotec
- Skärmaskin Maruyama
- Skärmaskin RIDGID
- Skärmaskin Kalorik
- Skärmaskin Westfalia
- Skärmaskin Brandson
- Skärmaskin Mia
- Skärmaskin Khind
- Skärmaskin Gastronoma
- Skärmaskin Rösle
- Skärmaskin Globe
- Skärmaskin Venga
- Skärmaskin Domoclip
- Skärmaskin Emga
- Skärmaskin Baker's Mark
- Skärmaskin Avantco
- Skärmaskin Kogan
- Skärmaskin Wolfcraft
- Skärmaskin Esperanza
- Skärmaskin PowerTec Kitchen
- Skärmaskin Panduit
- Skärmaskin Thane
- Skärmaskin Berkel
- Skärmaskin Louis Tellier
- Skärmaskin GARDE
- Skärmaskin Pro-Cut
- Skärmaskin Bifinet
- Skärmaskin Jokari
- Skärmaskin Kleva
- Skärmaskin Bron-Coucke
- Skärmaskin Enkho
- Skärmaskin Backyard Pro Butcher Series
- Skärmaskin Prince Castle
- Skärmaskin Boska
- Skärmaskin Borner
- Skärmaskin Backyard Pro
- Skärmaskin Royal Catering
- Skärmaskin Tescoma
- Skärmaskin Prowork
- Skärmaskin Weston
- Skärmaskin Ovela
- Skärmaskin Logan
Nyaste Skärmaskin Manualer
27 Mars 2025
27 Mars 2025
18 Februari 2025
13 Februari 2025
10 Februari 2025
8 Februari 2025
1 Februari 2025
31 Januari 2025
7 Januari 2025
6 Januari 2025