Advantech EKI-2701MPI-AE Bruksanvisning
Läs nedan 📖 manual på svenska för Advantech EKI-2701MPI-AE (2 sidor) i kategorin Splitter. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/2
1 Startup Manual
Overview
EKI-2701MPI is new generation which compliant
IEEE 802.3af/at/bt. The high-power PoE standard
boosts the power budget of each port to 60W or even
90W with PD device.
With the technology of PoE (Power over Ethernet),
both data and electrical power to Ethernet-enabled
devices are using a standard CAT5 cable. The
EKI-2701MPI BT PoE solution use the same cabling
standard with IEEE 802.3af/at. Which instead of
delivering power over to 4-pair twisted UTP with a
maximum of up to 90 watts of power over Ethernet
cable.
Packing List
Before installation, please make sure that you have
received the following:
1 x EKI-2701MPI or EKI-2701MPI- injector PS
1 x 130W 56V Power Supply (EKI-2701MPI- PS)
1 x Din-Rail, 1 x Wall-mount kit
If anything is missing or damaged, contact your
distributor or sales representative immediately.
Datasheet
For more detailed information, please refer to the full
manual which can be found on the Advantech’s
website.
Notes
For more information on this and other Advantech
products, please visit our websites at:
http://www.advantech.com/products
For technical support and service:
http://www.advantech.com/support/
This startup manual is for EKI-2701MPI &
EKI-2701MPI-PS
1st Edition
Nov. 2018
Specications
General
Compatibility: IEEE 802.3, 802.3u, 802.3x,
802.3af/at/bt, 802.3ab
LAN: 10/100/1000Base-T (X)
Transmission Distance: Up to 100 m
Transmission Speed: Up to 1000Mbps
Connectors:
- 1 x RJ45 W/ Data- in
- 1 x RJ45 W/ PoE-out
LED Indicators: PoE, SYS
Power
:
:
:
::
- Power Consumption Max. 95 W (Full load PoE)
- Power Input 55~57 VDC (Single input)
- Power Output 90W
- Connectors 6P Pluggable Terminal Block,
DC Jack
Dimensions (W x H x D):
84 x 80 x 25mm (3.307" x 3.15" x 0.984")
Enclosure: IP40
Operating Temperature:
- EKI-2701MPI: - -75°C (-40~167°F) 40
- EKI-2701MPI-PS: 0 ~ 40°C (32 ~ 104°F)
Storage Temperature: -40 ~ 85°C (-40 ~ 185°F)
Humidity: 10 ~ 95% (non-condensing)
EMC: CE, FCC
Warranty: 2 years
Overview
DIP Switch Power Connection
The EKI-2701MPI injector supports dual power
inputs
1. Insert the positive and negative wires into the V+
and V- contacts on the terminal block connector.
2. Tighten the wire-clamps screws to prevent the DC
wires coming loose.
Din-rail Mounting
Startup Manual 2
Produktspecifikationer
| Varumärke: | Advantech |
| Kategori: | Splitter |
| Modell: | EKI-2701MPI-AE |
Behöver du hjälp?
Om du behöver hjälp med Advantech EKI-2701MPI-AE ställ en fråga nedan och andra användare kommer att svara dig
Splitter Advantech Manualer
1 Januari 2025
1 Januari 2025
Splitter Manualer
- Splitter Samsung
- Splitter Abus
- Splitter Apc
- Splitter Aluratek
- Splitter Akasa
- Splitter Nedis
- Splitter Hyundai
- Splitter Manhattan
- Splitter Black Box
- Splitter Audio-Technica
- Splitter Tripp Lite
- Splitter ART
- Splitter IFM
- Splitter Ideal
- Splitter Fujitsu
- Splitter Digitus
- Splitter Audiovox
- Splitter Konig
- Splitter D-Link
- Splitter Marmitek
- Splitter Simrad
- Splitter Zipper
- Splitter Newstar
- Splitter Radial Engineering
- Splitter ATen
- Splitter Crestron
- Splitter Smart-AVI
- Splitter StarTech.com
- Splitter SIIG
- Splitter Xantech
- Splitter Televés
- Splitter KanexPro
- Splitter Botex
- Splitter Ecler
- Splitter Rose Electronics
- Splitter Kramer
- Splitter Palmer
- Splitter SmartAVI
- Splitter Rane
- Splitter Klover
- Splitter Lindy
- Splitter Atlona
- Splitter Key Digital
- Splitter Omnitron Systems
- Splitter AMX
- Splitter Rolls
- Splitter WyreStorm
- Splitter MuxLab
- Splitter C2G
- Splitter Club 3D
- Splitter CLUB3D
- Splitter Comprehensive
Nyaste Splitter Manualer
7 Januari 2025
6 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025
2 Januari 2025