Advantech IMC-150LPI Bruksanvisning

Advantech AV extender IMC-150LPI

Läs nedan 📖 manual på svenska för Advantech IMC-150LPI (4 sidor) i kategorin AV extender. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/4
1 Startup Manual
IMC
IMC
IMC
IMCIMC-
-
-
--150L
150L
150L
150L150LPI
PI
PI
PIPI
Long
Long
Long
LongLong R
R
R
RReach
each
each
eacheach P
P
P
PPoE+
oE+
oE+
oE+oE+
Extender
Extender
Extender
ExtenderExtender
Injecting data and power together, the IMC-150LPI is
brand new leading product which break the 100
meters limitation to greater Ethernet transmission
distances. Supports 10/100Mbps Ethernet over
twisted -pair cable (CAT 5, UTP).
Provides user configurable DIP switch selection of
LFPT feature and force speed setting. Flexible and
freely extends existing Ethernet networks to reach
remote IP devices.
The IMC-150LPI PoE+ extender compliant with
IEEE 802.3at PoE+ standard, it delivers data and
power over Ethernet cable without the distance
limitations of traditional copper wires. Extends data
and power transmission reach up to 800 meters. Also
acting as both power sourcing equipment(PSE) and
powered device (PD), power source from PoE+
switch or power with 48VDC input to either local or
remote sites.
Before installation, please make sure that you have
received the following:
1 x -IMC 150LPI PoE+ extender
1 x - Wall mount kit
1 x -Din rail
Startup Manual
If anything is missing or damaged, contact your
distributor or sales representative immediately.
The Startup manual and product data sheet can be
download on the Advantech's website.
Compatibility: IEEE 802.3, 802.3u, 802.3x,
802.3at/af
LAN: 10/100Base-T(X)
Connectors:
- 1 x 10/100Mbps -RJ 45 PD
- 1 x 10/100Mbps -RJ 45 PSE
LED Indicators: PWR, 1- PAIR, PSE
DIP Switch: LFPT, AUTO- Nego, Speed
Power:
:
:
::
-
Power Consumption: Max. W 33
(Full load PoE+)
-
Power Input: 48V DC
-
Power Output 30W
-
Connectors: 2P Pluggable Terminal Block,
DC Jack
Dimensions x H x (W D):
92.58 21.08 x x x x 98.04 mm (3.65 0.83 3.86 in.)
Enclosure: IP30
Operating Temperature: - ~ 40 75°C 40~167°F) (-
Storage Temperature: - ~ 40 80°C (- ~ 40 176°F)
Humidity: 0 ~ 95% (non -condensing)
Railway Trackside: EN -450121
EMC: CE, FCC
Front Panel View
Top Panel View
Rear View Panel
Packing List
Datasheet Do uments
STARTUP MANUAL
Notes
For more information on this and other Advantech
products, please visit our websites at:
http://www.advantech.com/products
For technical service: support and
http://www.advantech.com/support/
This startup is manual -150LPIfor IMC
P/N: 2049150L00
1st Edition
August, 2019
Overview Specifications
Panel View
Startup Manual 2
The wall-mount kit should be already be fixed to the
back panel of the IMC-150LPI. iI you need to attach
the attachment plate, follow the steps as show in the
figures below.
1.
Loosen the screw and reverse the direction of the
attachment -wall mount kit.
2.
Tightening -the wall mount kit 2 with screws
1.
Installing the -DIN Rail Mounting Kit.
2.
Removing -the DIN Rail.
3.
Once the screws are fixed in the wall, insert the
screw heads then slide the IMC-150LPI. Make
sure the IMC-150LPI is tighten stability on the
wall.
The terminal block connector is used for
IMC- 150LPI AC/DC inputs. See below figures for
wiring the redundant power.
1.
Insert the positive and negative wires into the
V+/V- contacts on the terminal block connector.
2.
Tighten the wire-clamps screws to prevent the DC
wires coming loose.
Warning: This is a Class A product. In domestic
environment this product may cause radio
interference in which case the user may be required
to take adequate measures.
Avertissement: Ceci est un produit de classe A.
Dans un environnement domestique, ce produit peut
provoquer des interférences radio, auquel cas
l'utilisateur peut être tenu de prendre les mesures
adéquates.
Warning: 1) an UL Listed Class II power adapter
suitable for use at Tma 50 degree C whose output
meets ES1 (or SELV), PS2 (or LPS) and is rated
48 orVDC 1.36A min., 2) an UL Listed Class II DC
power source suitable for use at Tma 85 degree C
whose output meets ES1 (or SELV), PS2 (or LPS)
and is rated 48VDC, 1.36A min.
Avertissement: 1) un adaptateur secteur de classe II,
répertorié UL, approprié pour une utilisation à 50
degrés Celsius, dont la sortie est conforme aux
normes ES1 (ou SELV), PS2 (ou LPS) et une tension
nominale de 48Vcc 1.36A min. ou 2) une source
d'alimentation CC de classe II répertoriée UL
pouvant être utilisée à une température de 85 degrés
Celsius dont la sortie est conforme à ES1 (ou SELV),
PS2 (ou LPS) et d'une puissance nominale de 48Vcc,
1.36A min
Wall Munting
Din- rail Mounting (Optional Accessory)
Power Connection
3 Startup Manual
The default setting for each DIP switch is ON. Please
see the following table for detail configuration.
DIP Switch
Name
Setting
Description
PIN 1
LFPT
ON LFPT feature enabled. default value. The
OFF LFPT feature disabled.
PIN 2
AUTO
ON Auto‐Nego enabled. The default value.
OFF
speed. Configure PIN 3 to select
PIN 3
SPEED
ON 100Mbps The default value.
OFF 10Mbps
PIN 4
Reserve for future use.
The LED definition is described in the below. table
1.
PoE -Pass Through
2.
Local PoE Injection
3.
Remote PoE Injection
1.
Set LFPT function and data rate via DIP Switch
Keep the default values on the device, or locate the
LFPT function or data rate via DIP switches.
Note: The data rate should be configured the same
on both local and remote side.
2.
Connect P2/PSE as extended port with local
unit
Connect the port 2 (PSE) for extended distance
transmission with local unit.
3.
Connect P1/PD as extended port with remote
unit
Connect the port 1 (PD) for extended distance
transmission with remote unit.
Note: could The PoE be only 2- available in pair
mode.
4.
Connect Ethernet Network
Wiring to CAT5/5e cable connect Local unit to
PoE switch or network and Remote unit to PD
device.
5.
Connect the power
Power input through the followings:
-
Local Power: 48VDC input via DC Jack or
48~55VDC via terminal block
-
PoE Pass - Through: Powered by PoE switch,
no power external required.
-
PoE Injection: 48~55VDC
DIP Switch Settings Installation Diagram
ATTENTION:
Make sure the AC/DC power source
voltage is stable, and do not plug the
IMC-150LPI via the same power source
to avoid generating power circuit
looping damage.
LED Color State Description
PWR
Green
ON
Multiple power DC input. jack,
terminal block and PD.
OFF No powered.
1‐PAIR
Green
ON When link with 1‐PAIR cable.
OFF When link with 2‐PAIR cable.
PSE
Green
ON When PoE PSE works.
OFF No works.
P1/PD
10M LNK/ACT
Green
ON active / Link at 10Mbps
OFF No link.
P1/PD
100M LNK/ACT
Green
ON active / Link at 100Mbps
OFF No link.
P2/PSE
10M LNK/ACT
Green
ON active / Link at 10Mbps
OFF No link.
P2/PSE
100M LNK/ACT
Green
ON active / Link at 100Mbps
OFF No link.
LED Indicators
Installation sInstructio

Produktspecifikationer

Varumärke: Advantech
Kategori: AV extender
Modell: IMC-150LPI

Behöver du hjälp?

Om du behöver hjälp med Advantech IMC-150LPI ställ en fråga nedan och andra användare kommer att svara dig


AV extender Advantech Manualer

Advantech

Advantech IMC-150LI Bruksanvisning

1 Januari 2025
Advantech

Advantech IMC-150LPI Bruksanvisning

1 Januari 2025

AV extender Manualer

Nyaste AV extender Manualer

Smart-AVI

Smart-AVI DFX-XT-2P Bruksanvisning

4 Januari 2025
HELGI

HELGI HI0375-100 Bruksanvisning

3 Januari 2025
HELGI

HELGI HLG0312-HDBITT Bruksanvisning

3 Januari 2025
HELGI

HELGI HLG0314-4K-FC Bruksanvisning

3 Januari 2025
HELGI

HELGI HLG0312-V2.0 Bruksanvisning

3 Januari 2025
HELGI

HELGI HLG0312PRO Bruksanvisning

3 Januari 2025
HELGI

HELGI HLG0314-4K-HDBITT Bruksanvisning

3 Januari 2025
HELGI

HELGI HI0318-HDBITT Bruksanvisning

3 Januari 2025
HELGI

HELGI HLG0314-V2.0 Bruksanvisning

3 Januari 2025
HELGI

HELGI HLG0314-HDBITT Bruksanvisning

3 Januari 2025