AEG STEP 420 Bruksanvisning

AEG Sågmaskin STEP 420

Läs nedan 📖 manual på svenska för AEG STEP 420 (62 sidor) i kategorin Sågmaskin. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/62

FIN

ST 400

ST 440

STEP 420

STEP 450

SPE 70

SPE 80 A

Instructions for use

Please read and save these

instructions.

Gebrauchsanleitung

Bitte lesen und aufbewahren.

Instruction d’utilisation

Prière de lire et de conserver.

Istruzioni d’uso

Si prega di leggere le istruzioni e

di conservarle.

Instrucciones de uso

Lea y conserve estas

instrucciones por favor.

Instruções de serviço

Por favor leia e conserve em seu

poder.

Gebruiksaanwijzing

Lees en let goed op deze

adviezen.

Brugsanvisning

Vær venlight at læse og

opbevare.

Bruksanvisning

Var god läs och tag tillvara dessa

instruktioner.

Käyttöohje

Lue ja säilytö

III

ENGLISH ST 400, ST 440, STEP 420, STEP 450, SPE 70, SPE 80 A

You have high standards and expect to purchase quality goods – quality offered by

Atlas Copco. We have built a durable and reliable electric power tool for you.

Please read the instructions for use before first operation so you can handle your

power tool effectively and safely.

We are sure that buying an AEG Electric Power Tool from Atlas Copco was the

right choice!

ST 400 ST 440 STEP 420

Cutting depth max. in:

Soft– wood 60 mm 60 mm 65 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Hard wood 50 mm 50 mm 55 mm–. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Steel 3 mm 3 mm 5 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Aluminium 10 mm 10 mm 10 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Nominal power 400 W 440 W 420 W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Weight 1,6 kg 1,6 kg 1,7 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Stroke rate under no-load 3000 min

-1 3000 min-1 450-3000 min-1

. . . . . . . . . .

Lengths of stroke 19 mm 19 mm 19 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Bevel cuts up to 45o45o45o

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

STEP 450 SPE 70 SPE 80 A

Cutting depth max. in:

Soft– wood 65 mm 70 mm 70 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Hard wood 55 mm 60 mm 60 mm–. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Steel 5 mm 5 mm 5 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Aluminium 10 mm 10 mm 10 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Nominal power 450 W 500 W 500 W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Weight 1,7 kg 1,7 kg 1,7 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Stroke rate under no-load 450-3000 min

-1 450-3000 min-1 450-3000 min-1

. .

Lengths of stroke 19 mm 19 mm 19 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Bevel cuts up to 45o45o45o

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

JPlease pay attention to the safety instructions in the attached leaflet!

JDust that arises when working on material containing asbestos or stonework

containing crystalline silicic acid is harmful to the health. Please follow accident

prevention regulations.

JAppliances used at many different locations including open air must be connected

via a current surge preventing switch.

JAlways use the protective shields on the machine.

JAlways disconnect the plug from the socket before carrying out any work on the

machine.

JAlways wear goggles when using the machine. It is recommended to wear gloves,

sturdy non slipping shoes and apron.

JSawdust and splinters must not be removed while the machine is running.

JDo not pierce the motor housing as this could damage the double insulation (use

adhesives).

JKeep mains lead clear from working range of the machine. Always lead the cable

away behind you.

JOnly plug-in when machine is switched off.

JDust that arises when working on wood or using the tool on industrial material can be

dangerous to health. In this case connect the tool to a suitable suction device.

JDo not use cracked or distorted saw blades.

Typically the A-weighted sound pressure level of the tool is 82 dB (A).The noise

level when working can exceed 85 dB (A). Wear ear protectors!

Measured values determined according to EN 50 144.

Typically the weighted acceleration is 3 m/s

Measured values determined according to EN 50 144.

This jig saw can cut wood, plastic and metal; it can cut straight lines, bevels, curves,

and internal cut-outs.

Do not use this product in another way as stated for normal use.

Introduction

Technical Data

Advice for your

safety

Measured sound

value

Measured

vibration value

Use

ENGLISH ST 400, ST 440, STEP 420, STEP 450, SPE 70, SPE 80 A

Connect only to a single-phase AC current supply and only to the mains voltage

specified on the rating plate. Connection to sockets without earth protection is

possible as the appliance features protective insulation to DIN 57 740/ VDE 0740

and CEE 20. Radio suppression complies with the European standard EN 55014.

When fitting the plug, make sure that the brown (live) wire of this appliance is

connected to the plug terminal marked L or coloured red, and the blue (neutral) wire

of this appliance is connected to the plug terminal marked N or coloured black.

Under no circumstances must the wires of this appliance be connected to the earth

terminal of the plug marked either E, with the earth symbol or coloured green or

green/yellow.

Mains

connection

Brief description

III

Modiﬁcations: Text, diagrams and data are correct at the time of printing.

In the interest of continuous improvement of our products, technical

speciﬁcations are subject to alteration without prior notice.

The on-off switch can be fixed in the

” ”On - position for continuous operation

by means of the locking button.

The on-off switch is shaped in such a way that it can be

used from the forward or the rear holding position.

The sawdust blower removes sawdust

ahead of the cut – very practical when

sawing along a line.

Integrated suction channel for

connection to a

vacuum-cleaner.

The vibration damper permits quieter

running by means of a counterweight on the

plunger.

Transparent cover for

optimum sawdust

removal.

The stroke-rate (= movements per

minute of the saw blade) can be infinitely

varied by means of the adjustment

wheel.(not for ST 400, ST 440)

The anti-splintering device

almost entirely prevents the

edge of the wood from

splintering. (Accessory*)

The base plate can be tilted to both sides

by 45o for bevel cuts.

Integrated tool storage for spare

blade.

The built-in pendulum stroke improves the cutting

performance. The pendulum stroke of the saw blade

means it is only pressed against the material on the

reverse stroke (working stroke) and lifted off the

material on the forward stroke.

Result: better extraction of sawdust, lower friction

–> higher cutting performance.

The pendulum stroke can be adjusted by the

pendulum stroke control and thus adapted to different

kinds of material. (not for ST 400, ST 440)

Produktspecifikationer

Varumärke:	AEG
Kategori:	Sågmaskin
Modell:	STEP 420
Vikt:	620 g
Bredd:	97 mm
Djup:	159 mm
Höjd:	38 mm
Hållbarhetscertifikat:	RoHS
Antal per paket:	24 stuk(s)
Inspänning:	90 - 305 V
Uteffekt:	150 W
Utström:	20 A