AFX Plaza PLZS11MBBN Bruksanvisning

AFX Lättnad Plaza PLZS11MBBN

Läs nedan 📖 manual på svenska för AFX Plaza PLZS11MBBN (1 sidor) i kategorin Lättnad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
E26 (MB) door Luminaires In
Wall Mount
120VAC / 60Hz
Page 1 of 1 8061339 R1
Model #: PLZS11BN
PLZS11MBBN
311312332
Limited Factory Warranty
AFX Inc. hereby warranty that this xture is free from defects in materials and workmanship when installed and used under normal operating conditions for a period of 5 years
from date of shipment from factory. This warranty covers all component parts and extends only to replacement of defective xture or components; it does not cover failure due
to improper installation, misuse, mishandling or damage incurred in transit.
View shown for reference
only. Individual models may
vary.
Safety Precautions
Read all safety precautions and installation instructions carefully before installing or servicing this xture. Failure to comply with these instructions
could result in potentially fatal electric shock and/or property damage.
It is recommended that a qualied electrician perform all wiring. This xture must be wired in accordance with all national and local electrical codes.
Do not handle any energized xture or attempt to energize any xture with wet hands or while standing on a wet or damp surface or in water.
This xture is designed for use in a 120 circuit. This xture is not compatible with dimming circuit. VAC
Make sure that the power source conforms to the requirements of the xture. (See labels on the xture housing).
reduce the risk of electrical shock, and to assure proper operation, this xture must be adequately grounded. To accomplish proper grounding, To
there must be a separate ground wire (green) contact between this xture and the ground connection of your main power supply panel.
This xture is intended to be used for general indoor lighting in dry or damp locations.
Assembly Instructions
Step 1 Preparing for installation
A. Disconnect electrical power at fuse or circuit breaker box before
installing or servicing any part of this xture.
B. Carefully remove the xture from the carton, remove components
from hardware kit.
C. Remove mounting bracket (2) from xture.
D. Install mounting bracket (2) to junction box (not included) securely
with two screws (1).
E. Install the threaded stem (4) to the mounting bracket (2) and
secure it with a nut (3).
Wiring All wiring must take place inside junction box (not
included).
Caution: Make sure power is o at fuse or circuit breaker box.
Check power wires for damage or scrapes Use wire suitable for .
at least 90°C (194°F). Most dwellings built before 1985 Note:
have supply wire rated to 60°C. Consult a qualied electrician
before installing.
Step 2 Wiring xture
A. Make all wire connections to appropriate wire. Secure with wire
nuts (8) (provided).
B. Connect the green wire from the xture to the supply power
source ground wire.
C. Connect the black wire from the xture to the black (L) wire from
supply power source.
D. Connect the white wire from the xture to the white (N) wire from
supply power source.
E. Pull on each wire lead to make sure connections are secure.
Make certain no bare wires are exposed outside of wire
connectors. Tuck all connections neatly into the junction box.
Step 3 Mounting
A. Install the xture housing (5) to the mounting bracket by aligning the middle hole on the housing
with the threaded stem (4) and securing it with the nial (6).
B. Install 2x bulbs (9 not included) to lamp sockets. Use only E26, medium base lamps, Max 60W
Type A- 19.
C. Slide the diuser (7) into the housing (5).
Step 4 Restore power at fuse or circuit breaker box

Produktspecifikationer

Varumärke: AFX
Kategori: Lättnad
Modell: Plaza PLZS11MBBN

Behöver du hjälp?

Om du behöver hjälp med AFX Plaza PLZS11MBBN ställ en fråga nedan och andra användare kommer att svara dig




Lättnad AFX Manualer

Lättnad Manualer

Nyaste Lättnad Manualer