Aguilar Tone Hammer 700 Bruksanvisning

Aguilar Inte kategoriserad Tone Hammer 700

Läs nedan 📖 manual på svenska för Aguilar Tone Hammer 700 (26 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/26
Page 1
English
Thank you for purchasing the Tone Hammer® 700
amplier!
Incorporating the preamp from the popular Tone
Hammer® preamp/DI pedal this superlight bass head
combines three bands of flexible EQ, a colorful “Drive”
control, and watts of power in a 4 lb. (2.22 kg.) 700 .9
package. The Tone Hammer® 700 will give you the
legendary“Aguilar Sound” while still fitting into the
accessory pouch of most gig bags the perfect choice
for bass players on the go. This solid state amplier
provides 700 watts at either 4 or 2.67 ohms, continuous
boasts an incredibly flexible EQ section, and also
features a series eects loop, XLR balanced output, and
two rear panel speakon outputs.
Table of Contents
I. Important Safety Instructions page 2
II. Getting Started page 3
A. Manual Conventions
B. Basic Setup
C. Protection Features
III. Features and Functions page 4
A. Front Panel
B. Rear Panel
IV. Warranty Information page 6
V. Environmental Protection page 6
Page 2
I. Important Safety Instructions
WARNING: To reduce the risk of re or electric shock, do not expose
equipment to rain or moisture. Aguilar Amplication assumes no
responsibility for any damage or injury that results from improper
use or service.
CAUTION: RISK OF ELECTRIC SHOCK! DO NOT OPEN! There are no user
serviceable parts inside of this product. This is a high voltage
device, and internal voltages can be lethal. Any and all work
should be performed by qualied personnel only.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of time.
13. Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
14. Vents are provided for heat dissipation on the sides, and at the rear of the amplier.
Maintain at least a 2” (5cm) space around these vents to provide sufficient
ventilation.
15. Make sure that the power cord is intact before plugging it into the unit. Do not use a
cord with visible damage to its insulation, or connectors.
16. The equipment shall be connected to a MAINS socket outlet with a protective
earthing connection. This is a Class I device, equipped with a safety feature that
requires the use of the three-pin grounding power plug.
17. Use only accessories listed in this manual, or in other way specied by the
manufacturer.
18. Do not install this amplier on carts or other moving objects.
19. Where the MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable. To completely disconnect the
equipment from the AC mains, remove the power cord from the AC receptacle.
20. Do not use this device with wall/ceiling mounts not specied by the manufacturer.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that
may cause undesirable operation.

Produktspecifikationer

Varumärke: Aguilar
Kategori: Inte kategoriserad
Modell: Tone Hammer 700

Behöver du hjälp?

Om du behöver hjälp med Aguilar Tone Hammer 700 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Aguilar Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer