Aigis CAM-HC1CH30-6 Bruksanvisning

Aigis övervakningskamera CAM-HC1CH30-6

Läs nedan 📖 manual på svenska för Aigis CAM-HC1CH30-6 (12 sidor) i kategorin övervakningskamera. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/12

I o In s t a l l a t I o n a n d p e r a t I n g n s t r u c t I o n s

w w w l I n e a r c o r p c o m. .

Hc serIes

window

Pen St d f

Count

H s ceIgHt trIp amera

IMPORTANT SAFEGUARDS

1. Read Instructions - All the safety and operating instructions

should be read before the unit is operated.

2. Retain Instructions - The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the unit and in the

operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions

should be followed.

5. Cleaning - Unplug the unit from the outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp

cloth for cleaning.

6. Attachments - Do not use attachments not recommended by

the product manufacturer as they may cause hazards.

7. Accessories - Do not place this unit on an unstable stand,

tripod, bracket, or mount. The unit may fall, causing serious

injury to a person and serious damage to the unit. Use only

with a stand, tripod, bracket, or mount recommended by

the manufacturer or sold with the product. Any mounting

of the unit should follow the manufacturer’s instructions

and should use a mounting accessory recommended by the

manufacturer.

An appliance and cart combination should be moved with

are. Quick stops, excessive force, and uneven surfaces

may cause the appliance and cart combination to overturn.

8. Ventilation - Openings in the enclosure, if any, are provided

for ventilation, to ensure reliable operation of the unit, and

to protect it from overheating. These openings must not be

blocked or covered. This unit should not be placed in a built-

in installation unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

9. Power Sources - This unit should be operated only from

the type of power source indicated on the marking label. If

you are not sure of the type of power supply you plan to

use, consult your dealer or local power company. For units

intended to operate from battery power or other sources,

refer to the operating instructions. This equipment is to be

isolated from the mains supply by a limited power source as

specified in EN60950:1992 Clause 2.11.

10. Grounding or Polarization - This unit may be equipped with

a polarized alternating-current line plug (a plug having one

blade wider than the other). This plug will fit into the power

outlet only one way. This is a safety feature. If you are unable

to insert the plug fully into the outlet, try reversing the plug.

If the plug should still fail to fit, contact your electrician

to replace your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

Alternately, this unit may be equipped with a 3-wire

grounding-type plug, a plug having a third (grounding) pin.

This plug will only fit into a grounding-type power outlet.

This is a safety feature. If you are unable to insert the plug

into the outlet, contact your electrician to replace your

obsolete outlet. Do not defeat the safety purpose of the

grounding-type plug.

11. Power Cord Protection - Power supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying

particular attention to cords and plugs, convenience

receptacles, and the point where they exit from the

appliance.

12. Power Lines - An outdoor system should not be located in

the vicinity of overhead power lines or other electric light

or power circuits or where it can fall into such power lines

or circuits. When installing an outdoor system, extreme care

should be taken to keep from touching such power lines or

circuits as contact with them might be fatal. U.S.A. models only

- refer to the National Electrical Code Article 820 regarding

installation of CATV systems.

13. Overloading - Do not overload outlets and extension cords

as this can result in a risk of fire or electric shock.

14. Object and Liquid Entry - Never push objects of any kind

into this unit through openings, as they may touch dangerous

voltage points or short out parts that could result in a fire or

electric shock. Never spill liquid of any kind on the unit.

15. Servicing - Do not attempt to service this unit yourself as

opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified

service personnel.

16. Damage Requiring Service - Unplug the unit from the outlet

and refer servicing to qualified service personnel under the

following conditions:

a. When the power supply cord or plug is damaged.

b. If liquid has been spilled or objects have fallen into the

unit.

c. If the unit has been exposed to water and/or inclement

weather (rain, snow, etc.).

d. If the unit does not operate normally by following the

operating instructions. Adjust only those controls that

are covered by the operating instructions, as an improper

adjustment of other controls may result in damage and

will often require extensive work by a qualified technician

to restore the unit to its normal operation.

e. If the unit has been dropped or the cabinet has been

damaged.

f. When the unit exhibits a distinct change in performance--

this indicates a need for service.

17. Replacement Parts - When replacement parts are required,

be sure the service technician has used replacement

parts specified by the manufacturer or have the same

characteristics as the original part. Unauthorized substitutions

may result in fire, electric shock, or other hazards.

18. Safety Check - Upon completion of any service or repairs to

this unit, ask the service technician to perform safety checks

to determine that the unit is in proper operating condition.

19. Coax Grounding - If an outside cable system is connected

to the unit, be sure the cable system is grounded. U.S.A.

models only--Section 810 of the National Electrical Code,

ANSI/NFPA No.70-1981, provides information with respect

to proper grounding of the mount and supporting structure,

grounding of the coax to a discharge unit, size of grounding

conductors, location of discharge unit, connection to

grounding electrodes, and requirements for the grounding

electrode.

20. Lightning - For added protection of this unit during a lightning

storm, or when it is left unattended and unused for long

periods of time, unplug it from the wall outlet and disconnect

the cable system. This will prevent damage to the unit due to

lightning and power line surges.

SAFETY PRECAUTIONS

CAUTION: TO REDUCE THE RISK

OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER

SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE

PERSONNEL.

This symbol indicates the presence of

uninsulated “dangerous voltage” with-

in the product’s enclosure. This may

constitute a risk of electric shock.

The user should consult the oper-

ating and maintenance (servicing)

instructions in the literature accom-

panying the appliance.

Attention: Installation should be performed

by qualified service personnel only in accor-

dance with the National Electrical Code or

applicable local codes.

Power Disconnect. Units with or without

ON-OFF switches have power supplied to the

unit whenever the power cord is inserted into

the power source; however, the unit is opera-

tional only when the ON-OFF switch is in the ON posi-

tion. The power cord is the main power disconnect for

all units.

1 UNPACKING

Unpack carefully. This is electromechanical equipment and

should be handled with care.

Check for the following items:

• Verify the unit model number.

• Verify that parts listed below have been included.

HC1CH30-6xx - Height Strip w/ one 650TVL color camera

and 3.0mm lens.

Hardware Kit

5 x Cable Ties

5 x Cable Tie Mounts

3 x Plastic Wall Anchor

3 x No. 8 cross recessed self-tapping screw, 1-1/2” length

1 x Barrel Plug Connector, 2.1mm pin, 36” length,

stripped leads

1 x 12VDC 0.5 Amp Power Adapter, 6-foot cord

CAM-HC1CH30-6 - Accessory 650TVL color camera w/

3.0mm fixed lens

Hardware Kit

1 x 12VDC 0.5 Amp Power Adapter, 6-foot cord

1 x M3 Nylon Lock Nut

1 x Flat Washer

MT-HC – Accessory Wall Bracket to turn the Height Strip

90° Left or Right

3 x M4 Screw, Pan Head Cross Recessed

3 x M4 Lock Nut

Equipment Required

5.5mm or 7/32-inch Nut Driver (or Socket)

7.0mm or 9/32-inch Nut Driver (or Socket)

#2 Cross Recessed Screwdriver

Wire Cutters / Scissors

Level

Drill with 3/8” bit

Optional: Step drill bit or 1/8”, 3/32”, 3/16”, 1/4”, 3/8”

bits

Optional: De-burr tool

Note: Optional items listed above are for use with side-

mounted cameras. See Installation section.

If an item appears to have been damaged in shipment,

replace it properly in its carton and notify the shipper.

If any items are missing, notify Aigis Mechtronics Sales

Representative or Customer Service. The shipping carton is

the safest container in which the unit may be transported.

Save it for possible future use. Verify that the parts listed as

follows have been included.

Produktspecifikationer

Varumärke:	Aigis
Kategori:	övervakningskamera
Modell:	CAM-HC1CH30-6
Vikt:	113 g
Anslutningsteknik:	Bedraad
Certifiering:	FCC class A, EN55022 class A, VCCI class A, C-Tick, CE, EN55024, UL60950-1 (cULUS), EN60950-1 (TUV), \nEN60825, UL60950-1 (cULus), EN60950-1 (TUV), \nCAN/CSA C22.2
Förvaringstemperatur:	-25 - 70 °C
Våglängd:	1310 nm
Förvaringsfuktighet:	5 - 95 procent
Medeltid mellan fel (MTBF):	1500000 uur
Maximal dataöverföringshastighet:	1000 Mbit/s
Mått (B x D x H):	22 x 73 x 130 mm
Strömförbrukning (typiskt):	5.5 W
Drifttemperatur (TT):	0 - 40 °C