Aiphone LEM-1DL Bruksanvisning

Läs nedan 📖 manual på svenska för Aiphone LEM-1DL (4 sidor) i kategorin Intercomsystem. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
– 1 –
INSTALLATION & OPERATION MANUAL
LEM-1DL ACCESS SENTRY is a convenient 2-station entry control system and can most suitably be used in small offices,
retailers / mall's back doors, etc.
PRECAUTIONS
WARNING
(Negligence could result in death or serious injury.)
1. Do not dismantle or alter the unit. Fire or electric shock could result.
2. Do not connect any non-specified power source to the +, - terminals. Also, do not install two power supplies in
parallel to a single input. Fire or damage to the unit could result.
3. Keep the unit away from water or any other liquid. Fire or damage to the unit could result.
4. When existing chime wires are used, it is possible that they contain AC voltage. Electric shock or unit damage
could result. Ask a qualified technician.
5. Do not use power supply with a voltage other than specified. Fire or electric shock could result.
6. For power supply, use Aiphone power supply model specified to use with system. If non-specified product is
used, fire or malfunction could result.
CAUTION
(Negligence could result in injury or damage to property.)
1. Before turning on the power, make sure wires are not crossed or shorted. Fire or electric shock could result.
2. When mounting the unit on wall, install the unit in a convenient location, but not where it could be jarred or
bumped. Injury could result.
3. Do not install or make any wire terminations while power supply is plugged in. It can cause electrical shock or
damage to the unit.
4. Do not install the unit in any of the following locations. Fire, electric shock, or unit trouble could result.
* Places under direct sunlight, or near heating equipment, boiler that varies in temperature.
* Places subject to dust, oil, chemicals, hydrogen sulfide (hot spring).
* Places subject to moisture and humidity extremes, such as bathrooms, cellars, greenhouses, etc.
* Places where the temperature is quite low, such as inside refrigerated area or in front of an air conditioner.
* Places subject to steam or smoke (near heating or cooking surfaces).
* Where noise generating devices such as dimmer switches or inverter electrical appliances are closeby.
* Locations subject to extremely powerful electric fields.
5. Do not install the unit in a location subject to frequent vibration or impact. It may fall or tip over, resulting in
damage to the unit or personal injury.
GENERAL PRECAUTIONS
1. Keep the unit more than 1 m (3.3') away from Radio or TV sets.
2. In areas where broadcasting station antennas are closeby, the intercom system may be affected by radio
frequency interference.
3. The unit will not work during power failure.
4. All units, except for door stations, are designed for indoor use only. Do not use at outdoor locations.
5. Using a mobile phone or professional-use radio equipment such as walkie-talkie close to the system may cause a
malfunction.
Access Sentry Door Entry Control System
LEM-1DL
1-call master, with door release button
Prohibited Keep unit away from waterDo not dismantle unit Be sure to follow the instructions
– 2 –
1
System Components
2 Names & Features
FEATURES:
* Convenient door entry control system with DOOR RELEASE button
* AC transformer (PT-1210N) supplies power for both communication and door strike
* Desk-top or wall-mountable master
Call tone adjustment
3-position volume switch, located under Operation Plate.
Adjusts call tone volume (Low - Medium - High).
Package contents
• LEM-1DL
• Packet of screws
INSTALLATION &
OPERATION MANUAL
1-call master with
DOOR RELEASE
button
Master station Sub station Door release
EL-12S
AC 12V, 125mA
Power supply
PT-1210N
AC transformer
(North America only)
Or use an equivalent
AC transformer
AC 12V, 10VA.
PS-1225UL
PS-1225S
PS-1225
PS-1215DIN
LE-D
Surface mount
door station
LE-DA  
Flush mount
door station
LE-A
1-call sub
station
TALK
OFF
VOL.VOICE
TALK
VOL.VOICE
LEM-1DL
TALK button
Operation Plate
Speaker / Microphone
OFF button
(standby)
Voice Volume Control
Door Release ( ) button
HighLow
CALL
CALL
3-pos.
call tone vol. switch
(under Operation Plate) LEM-1DL
– 3 –
3
Mounting
Front Case
Single-gang box
83.5mm,
3-5/16"
Screw (2)
Wall
Lift and pull off
Chassis
Loosen
Push either side
Operation
Plate
83.5mm,
(3-5/16")
Single-gang box
LE-D Unit
Connector
2-gang box
Stainless
Cover
Screw (2)
Screw (2)
Main Unit
83.5mm,
(3-5/16")
For surface wall cable run, pass through
opening on top or bottom of back case.
LEM-1DL LE-D
LE-DA
Back wiring LE subs
4 Wiring
+
1
E
EL
EL
R
for AC or DC power supply
for calling & communication
for communication (common)
for door release & its power supply
Normally open dry contact closure
+
1
E
EL, EL
}
AC Transformer
PT-1210N
NP
NP
NP PT-1210N
LE-DA
DOOR RELEASE
EL-12S
(AC 12V, 125mA)
LEM-1DL
1
E
1
E
+
EL
EL
AC Transformer
PT-1210N
NP
NP PT-1210N
LE-DA
DOOR RELEASE
(Max. AC 30V, 1A
Max. DC 30V, 1A)
LEM-1DL
1
E
1
E
+
EL
EL
Use a suitable power source
locally available.
When EL-12S door release is used;
When door release of OTHER manufacturer is used;
The actual terminal locations are
different from the ones shown in
the diagram below.
NP: Non-polarized
Run separately each cable to
Door station and Door Release.

Produktspecifikationer

Varumärke: Aiphone
Kategori: Intercomsystem
Modell: LEM-1DL

Behöver du hjälp?

Om du behöver hjälp med Aiphone LEM-1DL ställ en fråga nedan och andra användare kommer att svara dig




Intercomsystem Aiphone Manualer

Intercomsystem Manualer

Nyaste Intercomsystem Manualer