Altec Lansing Mini H20 3 Bruksanvisning

Altec Lansing Vagga/dockningsstation Mini H20 3

Läs nedan 📖 manual på svenska för Altec Lansing Mini H20 3 (2 sidor) i kategorin Vagga/dockningsstation. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

2. For a look at the various buttons on your speaker, view the graphic below.

Item # IMW258

Quick Start Guide

4. Pairing Your Speaker With a Bluetooth Phone

6. True Wireless Pairing

5. Listening to Music

Your speaker’s True Wireless Pairing feature allows you to connect two speakers

together for a bigger, more powerful sound. To connect mulitple speakers together,

follow the steps below.

Pair your ﬁrst speaker (Speaker 1)

with a Bluetooth phone.

Power on your second speaker

(Speaker 2).

Enter True Wireless Mode on your

second speaker (Speaker 2).

Step 1 Step 2 Step 3

Enter True Wireless Mode on your

ﬁrst speaker (Speaker 1).

Once both speakers are in True Wireless Mode, wait for a few seconds

and both speakers will be paired to your phone.

Step 4 Step 5

Speaker 1

Speaker 2 Speaker 2

3. Charging: Charging may take up to 3 hours.

① Power

②

Volume –

③

Volume +

④ LED Indicator Light

⑤ AUX IN Port

⑥ Charging Port

mini h2O 3

Speaker 1

(left channel)

Speaker 2

(right channel)

1. Do not allow children or the inﬁrm to play with your speaker without adult supervision.

2. Do not expose your speaker to excessive heat, ﬂames or ﬁre.

3. Always press all buttons carefully. Do not manhandle your speaker.

4. Do not use in extremely dry environments, as this can lead to static discharge during usage.

5. Do not expose your speaker to temperatures above 40°C. Keep out of direct sunlight.

6. Do not attempt to repair this product yourself. Contact a qualiﬁed service center if your speaker

is in need of service.

7. Do not drop, puncture or expose your speaker to excessive trauma.

8. Your speaker is not intended for commercial use.

9. Do not place near objects that generate a strong magnetic ﬁeld.

10. Unplug this device when not in use for long periods of time or during lightning storms.

11. The device is equipped with an integrated lithium-polymer battery. The battery cannot be

replaced. Do not attempt to remove the battery from the device.

12. The battery used in this device may present a risk of ﬁre or chemical burn if mistreated.

13. Please recycle or dispose of your speaker properly based on the laws and rules of your

municipality.

RUGGED BLUETOOTH SPEAKER

MIN 3I H2O

1. Make sure the following items are

included in your package.

USB Cable

AUX Cable

mini h2O 3

LED Indicator Light

(red) = Charging

(blue) = Charging Complete5

SEC5

1-2 SEC

3 SEC

PRESS & HOLD (2 sec)

Altec Lansing One Year Warranty Card

What Is Not Covered by Warranty

To Obtain Warranty Service and Troubleshooting information:

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference , and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Caution: changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules, These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates. Uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions. May cause harmful

interference to radio or -television reception, which can be

following measures:

__ Reorient or relocate the receiving antenna.

__ Increase the separation between the equipment and receiver.

__ Consult the dealer or experienced radio/ TV technician for help.

Item # IMW258

Quick Start Guide

RUGGED BLUETOOTH SPEAKER

MIN 3I H2O

Answer Call

PRESS & HOLD (2 sec)

End Call