Amana NTW4630YQ Bruksanvisning

Amana tvättmaskin NTW4630YQ

Läs nedan 📖 manual på svenska för Amana NTW4630YQ (32 sidor) i kategorin tvättmaskin. Denna guide var användbar för 14 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/32

W10420472B

W10420473B - SP

TOP-LOADING

WASHER

USE AND CARE GUIDE

Table of Contents

WASHER SAFETY ............................................................ 2

WHAT’S NEW UNDER THE LID? .................................... 3

CONTROL PANEL AND FEATURES ............................... 4

CYCLE GUIDE .................................................................. 5

USING YOUR WASHER ...................................................6

WASHER MAINTENANCE ............................................... 8

TROUBLESHOOTING .................................................... 10

WARRANTY ....................................................................14

ASSISTANCE OR SERVICE ....................... BACK COVER

Table des matières

SÉCURITÉ DE LA LAVEUSE .........................................15

QUOI DE NEUF SOUS LE COUVERCLE? .................... 16

TABLEAU DE COMMANDE

ET CARACTÉRISTIQUES .............................................. 17

GUIDE DE PROGRAMMES ........................................... 19

UTILISATION DE LA LAVEUSE .....................................20

ENTRETIEN DE LA LAVEUSE .......................................23

DÉPANNAGE .................................................................. 25

GARANTIE ...................................................................... 31

ASSISTANCE OU SERVICE. .... COUVERTURE ARRIÈRE

LAVEUSE À CHARGEMENT

PAR LE DESSUS

GUIDE D’UTILISATION ET

D’ENTRETIEN

Para una versión de estas instrucciones en español, visite www.amana.com

WASHER SAFETY

Lid Locked

To allow for higher spin speeds, the lid will lock and the

Lid Locked light will turn on. When this light is lit, the

lid is locked and cannot be opened. When this light is

blinking, the washer is paused. When this light is off, the

lid can be opened. After a cycle is started, water will enter

washer and then lock. If you need to open the lid to add

a garment after this point, you must press START/Pause/

Unlock Lid and wait for the lid to unlock. The lid will only

unlock after washer movement has stopped. Depending

on when in the cycle you try to pause, it may take several

seconds to several minutes for the lid to unlock. Press

START/Pause/Unlock Lid to resume the cycle.

Sensing

This washer will perform a series of spins to check for load

balance. During this time, a series of clicks and a whirring

noise signal that sensing technology is determining if there

is an off-balance load.

IMPORTANT:

■After the washer basket lls to the selected water level, the lid must be closed before the wash cycle can start.

If lling stops with the lid open, close lid and press START button.

■Fabric Softener option must be set to Yes to ensure fabric softener dispenses at the correct time.

Sounds

At different stages of the wash cycle, you may hear

sounds and pauses that are different from those of your

previous washer. For example, you may hear a clicking

and hum at the beginning of the cycle as the lid lock

goes through a self-test. There will be different kinds of

humming and whirring sounds as the agitator tests for

load balance or moves the load. And, sometimes, you

may hear nothing at all as the washer allows time for

clothes to soak.

Spray Rinse

Select cycles default to a spray rinse. During these cycles,

you will hear water enter the washer as the tub spins,

allowing the rinse water to penetrate clothes. Check the

“Cycle Guide” for details.

WHAT’S NEW UNDER THE LID?

Your new washer will operate differently than your past agitator-style washer.

LOAD SIZE

Select the setting most suitable for your load. Ex small

will add a low amount of water for smaller loads and

Large will add the most amount of water for large or bulky

loads. Items need to move freely. Tightly packing can lead

to poor cleaning performance, and may increase wrinkling

and tangling.

WASH TEMPERATURE

Temperature senses and maintains uniform water

temperatures by regulating incoming hot and cold water.

Select a wash temperature based on the type of fabric

and soils being washed. For best results and following

the garment label instructions, use the warmest wash

water safe for your fabric.

■ Warm and hot water will be cooler than what your

previous washer provided.

■Even in a cold and cool water wash, some warm

water may be added to the washer to maintain

a minimum temperature.

FABRIC SOFTENER

This option can be added to most cycles and must be set

to YES if using fabric softener during a cycle. It ensures that

fabric softener is added at the correct time in the rinse for

even distribution.

WASH CYCLE KNOB

Use the Wash Cycle knob to select cycles on your washer.

Knob does not advance during the progress of the cycle,

see cycle status lights for each stage of the process. See

“Cycle Guide” for detailed descriptions of cycles.

START/PAUSE/UNLOCK LID BUTTON

Press to start the selected cycle; press again to pause

the cycle and unlock the lid.

NOTE: If the washer is spinning, it may take several

minutes to unlock the lid. Press and hold for 3 seconds

to cancel a cycle.

CYCLE STATUS LIGHTS

The Cycle Status Lights show the progress of a cycle. At

each stage of the process, you may notice sounds or pauses

that are different from traditional washers.

FILL

When the START/Pause/Unlock Lid button is pressed,

the washer will ll to the selected water level. If the lid is

closed when the machine is done lling the lid will lock

and the machine will begin operation.

If the lid is open when the water stops entering the

machine, the cycle will not begin until the lid has been

closed and the START/Pause/Unlock Lid button is

pressed. If the cycle has not been started within

10 minutes of the water lling the washer, the washer

will pump out the water.

NOTE: Avoid opening lid during sensing phase. The

sensing process will start over when the washer is

restarted. The sensing light may also come on during the

Soak and Wash portions of the cycle. This is normal. To

restart the washer after the lid has been opened press

start.

WASH

You will hear the agitator moving the load. The motor

sounds may change at different stages in the cycle. The

wash time is determined by the selected soil level.

RINSE

You will hear sounds similar to the wash cycle as the

washer rinses and moves the load. You may hear the

motor turning on briey (short hum) to move the basket

while lling. Fabric softener will be added if the Fabric

Softener knob was set to YES.

Some cycles use spray rinsing. After draining and

spinning out wash water, the washer will continue to

spin and spray in rinse water for the entire rinse time.

SPIN

The washer spins the load at increasing speeds for

proper water removal, based on the selected cycle

and spin speed.

CYCLE COMPLETE

Once the cycle is complete, this light will come on.

Remove the load promptly for best results.

LID LOCKED

To allow for higher spin speeds, the lid

will lock and the Lid Locked light will

turn on. When this light is on, the lid is

locked and cannot be opened. When

this light is blinking, the washer is

paused. When this light is off, the lid

can be opened.

If you need to open the lid, press

START/Pause/Unlock Lid. The lid will

unlock once the washer movement has

stopped. This may take several minutes

if the load was spinning at high speed.

Press START/Pause/Unlock Lid again to

resume the cycle.

CONTROL PANEL & FEATURES

Not all features and options are available on all models.

Appearance may vary.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

re, or electrical shock.

WARNING

■Empty pockets. Loose change, buttons, or any small object

can pass under the agitator and become trapped, causing

unexpected sounds.

■Sort garments by recommended cycle, water temperature,

and colorfastness.

■Separate heavily soiled garments from lightly soiled.

■Separate delicate garment from sturdy fabrics.

■Do not dry garments if stains remain after washing, because

heat can set stains into fabric.

■Treat stains promptly.

■Close zippers, fasten hooks, tie strings and sashes, and

remove non-washable trim and ornaments.

■Mend rips and tears to avoid further damage to garments

during washing.

Helpful Tips:

■When washing water-proof or water-resistant garments, load

evenly.

■Use mesh garment bags to help avoid tangling when washing

delicate or small items.

■Turn knits inside out to avoid pilling. Separate lint-takers from

lint-givers. Synthetics, knits, and corduroy fabrics will pick up

lint from towels, rugs, and chenille fabrics.

NOTE: Always read and follow fabric care label instructions to

avoid damage to your garments.

1. Sort and prepare your laundry

USING YOUR WASHER

2. Add laundry products

Add a measured of amount of detergent or single-dose

laundry packet into the basket.

If using Oxi-type boosters, color-safe bleach, or fabric

softener crystals, add to the bottom of the washer basket

before adding clothes.

NOTE: Follow the manufacturer’s instructions to determine

the amount of laundry products to use.

5. Add fabric softener to dispenser

(on some models)

Pour a measured amount of liquid fabric

softener into dispenser; always follow

manufacturer’s directions for correct amount

of fabric softener based on your load size.

Dilute liquid fabric softener by lling the dispenser with warm

water until liquid reaches the underside of the rim. See Max Fill

line arrows. Then set Fabric Softener option knob to YES.

IMPORTANT: Fabric Softener option knob must

be set to YES to ensure proper distribution at

correct time in cycle.

Adding Liquid Fabric Softener Manually to

Wash Load

During the nal rinse, wait until the washer has

completed lling, press the START/Pause/Unlock

Lid button to pause the washer. Lift the lid and add the measured

recommended amount of liquid fabric softener. Do not allow

liquid fabric softener to spill, splash, drip, or run into the basket

or on load. Do not use more than the recommended amount.

Close the lid and press the START/Pause/Unlock Lid button again

to start the washer.

IMPORTANT: Fabric Softener option knob must be set to YES

to ensure proper distribution of the fabric softener during the

rinse portion of the cycle.

4. Add liquid chlorine bleach to

dispenser

Liquid

Chlorine Bleach

Do not overll, dilute, or use more than 1 cup (250 mL).

Do not use color-safe bleach or Oxi products in the same

cycle with liquid chlorine bleach.

3. Load laundry into washer

MAX FILL

Turn cycle knob to choose your wash cycle. For more

information, see “Cycle Guide”.

6. Select CYCLE

Load garments in loose heaps evenly

around basket wall. For best results, do

not pack the load tightly. Do not wrap

large items such as sheets around the

agitator; load them in loose piles around

the sides of the basket. Try mixing

different sized items to reduce tangling.

IMPORTANT: Do not tightly pack or

force items into washer. Items need to

move freely for best cleaning and to reduce

wrinkling and tangling.

Wash Temperature

Hot

Some cold water is added to save

energy. This will be cooler than

your hot water heater setting.

Warm

Some cold water will be added, so

this will be cooler than what your

previous washer provided.

Cool

Warm water may be added to

assist in soil removal and to help

dissolve detergents.

Cold

This is the temperature from your

faucet. If your tap cold water is

very cold, warm water may be

added to assist in soil removal

and help dissolve detergent.

Suggested Fabrics

Whites and pastels

Durable garments

Heavy soils

Bright colors

Moderate to light soils

Colors that bleed

or fade

Light soils

Dark colors that

bleed or fade

Light soils

Select the Load Size setting most suitable for your load. Small

will add a low amount of water for smaller loads and Large

will add the most amount of water for large or bulky loads.

Garments need to move freely.

7. Select LOAD SIZE

8. Select WASH TEMPERATURE

Once you select a cycle, select the desired temperature by

turning the Wash Temperature knob to the appropriate setting

based on your load. All rinses are cold.

NOTE: Always read and follow fabric care label instructions to

avoid damage to your garments.

If you are using fabric softener, be sure to set the Fabric

Softener option knob to YES.

9. Select options, if desired

10. Press START/PAUSE/UNLOCK

LID to begin wash cycle

Press the START/Pause/Unlock Lid button to start the wash

cycle. When the cycle has nished, the CYCLE COMPLETE

indicator will light. Promptly remove garments after cycle has

completed to avoid odor, reduce wrinkling, and rusting of

metal hooks, zippers, and snaps.

Unlocking the lid to add garments

If you need to open the lid to add 1 or 2 missed garments:

Press START/Pause/Unlock Lid; the lid will unlock once

the washer movement has stopped. This may take several

minutes if the load was spinning at high speed. Then close

lid and press START/Pause/Unlock Lid again to restart

the cycle.

If lid is left open for more than 10 minutes, the water will

pump out automatically.

WASHER MAINTENANCE

Replace inlet hoses after 5 years of use to reduce the risk

of hose failure. Periodically inspect and replace inlet hoses

if bulges, kinks, cuts, wear, or leaks are found.

When replacing your inlet hoses, mark the date of

replacement on the label with a permanent marker.

NOTE: This washer does not include inlet hoses. See the

“Installation Instructions” for more information.

WATER INLET HOSES

Operate your washer only when you are home. If moving, or

not using your washer for a period of time, follow these steps:

1. Unplug or disconnect power to washer.

2. Turn off water supply to washer, to avoid ooding due to

water pressure surge.

WINTER STORAGE CARE

IMPORTANT: To avoid damage, install and store washer

where it will not freeze. Because some water may stay in

hoses, freezing can damage washer. If storing or moving

during freezing weather, winterize your washer.

To winterize washer:

1. Shut off both water faucets; disconnect and drain water

inlet hoses.

2. Put 1 qt. (1 L) of R.V.-type antifreeze in basket and run

washer on RINSE/SPIN cycle for about 30 seconds to

mix antifreeze and remaining water.

3. Unplug washer or disconnect power.

NON-USE AND VACATION CARE

WASHER CARE

Recommendations to Help Keep Your Washer Clean and

Performing at its Best

1. Always follow the detergent manufacturer’s instructions

regarding the amount of detergent to use. Never use more

than the recommended amount because that may increase

the rate at which detergent and soil residue accumulate

inside your washer, which in turn may result

in undesirable odor.

2. Use warm and hot wash water settings sometimes (not

exclusively cold water washes), because they do a better

job of controlling the rate at which soils and detergent

accumulate.

3. Always leave the washer lid open between uses to help dry

out the washer and prevent the buildup of odor-causing

residue.

Cleaning Your Top Loading Washer

Read these instructions completely before beginning the

routine cleaning processes recommended below. This Washer

Maintenance Procedure should be performed, at a minimum,

once per month or every 30 wash cycles, whichever occurs

sooner, to control the rate at which soils and detergent may

otherwise accumulate in your washer.

Cleaning the Inside of the Washer

To keep your washer odor-free, follow the usage instructions

provided above, and use this recommended monthly cleaning

procedure:

Recommended Cycle for Cleaning the Washer

Refer to the “Cycle Guide” for the optimal cycle for cleaning

the inside of the washer. Use this cycle with affresh® Washer

Cleaner or liquid chlorine bleach as described below.

Begin procedure

1. affesh® Washer Cleaner Cycle Procedure

(Recommended for Best Performance):

a. Open the washer lid and remove any clothing or items.

b. Place an affesh® Washer Cleaner tablet in the bottom

of the washer basket.

c. Do not place an affresh® Washer Cleaner tablet

in the detergent dispenser.

d. Do not add any detergent or other chemical to the

washer when following this procedure.

e. Close the washer lid.

f. Select the cycle recommended for cleaning the inside

of the washer.

g. Press the START/Pause/Unlock Lid button to start the

cycle.

NOTE: For best results, do not interrupt cycle. If cycle must

be interrupted, press START/Pause/Unlock Lid once or

twice (depending on model). After the cycle has stopped,

run a RINSE/SPIN cycle to rinse cleaner from washer.

2. Chlorine Bleach Procedure (Alternative):

a. Open the washer lid and remove any clothing or items.

b. Add 1 cup (236 mL) of liquid chlorine bleach

to the bleach compartment.

NOTE: Use of more liquid chlorine bleach than is

recommended above could cause washer damage

over time.

c. Close the washer lid.

d. Do not add any detergent or other chemical

to the washer when following this procedure.

e. Select the cycle recommended for cleaning the inside of

the washer.

f. Press the START/Pause/Unlock Lid button to start the

cycle.

NOTE: For best results, do not interrupt cycle. If cycle must

be interrupted, press START/Pause/Unlock Lid once or

twice (depending on model). After the cycle has stopped,

run a RINSE/SPIN cycle to rinse cleaner from washer.

WASHER CARE (cont.)

Cleaning the Dispensers

After a period of using your washer, you may nd some

residue buildup in the washer’s dispensers. To remove

residue from the dispensers, wipe them with a damp cloth

and towel dry. Do not attempt to remove the dispensers or

trim for cleaning. The dispensers and trim are not removable.

If your model has a dispenser drawer, however, remove the

drawer and clean it before or after you run the Clean Washer

cycle. Use an all-purpose surface cleaner, if needed.

Cleaning the Outside of the Washer

Use a soft, damp cloth or sponge to wipe away any spills.

Use only mild soaps or cleaners when cleaning external

washer surfaces.

IMPORTANT: To avoid damaging the washer’s nish, do not

use abrasive products.

TRANSPORTING YOUR WASHER

1. Shut off both water faucets. Disconnect and drain water

inlet hoses.

2. If washer will be moved during freezing weather, follow

“Winter Storage Care” directions before moving.

3. Disconnect drain from drain system and drain any

remaining water into a pan or bucket. Disconnect drain

hose from back of washer.

4. Unplug power cord.

5. Place inlet hoses and drain hose inside washer basket.

6. Drape power cord over edge and into washer basket.

7. Place packing tray from original shipping materials back

inside washer. If you do not have packing tray, place heavy

blankets or towels into basket opening. Close lid and place

tape over lid and down front of washer. Keep lid taped until

washer is placed in new location.

REINSTALLING/USING WASHER AGAIN

To reinstall washer after non-use, vacation, winter storage,

or moving:

1. Refer to “Installation Instructions” to locate, level, and

connect washer.

2. Before using again, run washer through the following

recommended procedure:

To use washer again:

1. Flush water pipes and hoses. Reconnect water inlet hoses.

Turn on both water faucets.

2. Plug in washer or reconnect power.

3. Run washer through Casual Regular cycle to clean washer

and remove antifreeze, if used. Use half the manufacturer’s

recommended amount of detergent for a medium-size load.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

re, or electrical shock.

WARNING

TROUBLESHOOTING

If you experience Possible Causes Solution

Vibration or Off-Balance

Check the following for

proper installation or see

“Using Your Washer”

section

Feet may not be in contact with the

oor and locked. Front and rear feet must be in rm contact with oor, and washer

must be level to operate properly. Jam nuts must be tight against

the bottom of the cabinet.

Washer may not be level. Check oor for exing or sagging. If ooring is uneven, a 3/4"

(19 mm) piece of plywood under your washer will reduce sound.

See “Level the Washer” in Installation Instructions.

Load could be unbalanced. Load dry garments in loose heaps evenly around basket wall.

Adding wet garments to washer or adding more water to basket

could unbalance washer.

Wash smaller loads to reduce imbalance.

Do not tightly pack. Avoid washing single garments.

Use the Normal Regular cycle and select Large Load Size for

oversized, non-absorbent garments such as comforters or

poly-lled jackets.

See “Cycle Guide” and “Using Your Washer.”

Noises

Clicking or

metallic noises Objects caught in washer

drain system. Empty pockets before washing. Loose items such as coins

could fall between basket and tub or may block pump. It may be

necessary to call for service to remove items.

It is normal to hear metal items on clothing such as metal snaps,

buckles, or zippers touch against the basket.

Gurgling or humming Washer may be draining water. It is normal to hear the pump making a continuous humming

sound with periodic gurgling or surging as nal amounts of water

are removed during the Drain/Spin cycles.

Humming Load sensing may be occuring. You may hear the hum of the sensing spins after you have

started the washer. This is normal.

First try the solutions suggested here or visit our website at www.amana.custhelp.com -

In Canada www.amanacanada.ca for assistance and to possibly avoid a service call

TROUBLESHOOTING

If you experience Possible Causes Solution

Washer not performing as expected (cont.)

Washer not draining/

spinning, loads are

still wet or spin light

remains on (indicating

that the washer was

unable to pump

out water within

10 minutes)

Empty pockets and use

garment bags for small items. Small items may have been caught in pump or between basket

and tub, which can slow draining.

Use a cycle with a low

spin speed. Cycles with lower spin speeds remove less water than cycles

with high spin speeds. Use the recommended cycle/speed spin

for your garment. To remove extra water in the load, select Drain/

Spin. Load may need to be rearranged to allow even distribution

of the load in the basket.

The washer may be tightly

packed or unbalanced. Tightly packed or unbalanced loads may not allow the washer

to spin correctly, leaving the load wetter than normal. Evenly

arrange the wet load for balanced spinning. Select the Drain/

Spin cycle to remove excess water. See “Using Your Washer” for

loading recommendations.

Check plumbing for correct

drain hose installation. Drain

hose extends into standpipe

farther than 4.5" (114 mm).

Check drain hose for proper installation. Use drain hose form

and securely attach to drainpipe or tub. Do not tape over drain

opening. Lower drain hose if the end is higher than 96" (2.4 m)

above the oor. Remove any clogs from drain hose.

Too much detergent causing suds to

slow or stop draining and spinning. Always measure and follow detergent directions for your load.

To remove extra suds, select Rinse/Spin. Do not add detergent.

Dry spots on load

after cycle High speed spins extract more

moisture than traditional top-load

washers.

The high spin speeds combined with air ow during the nal spin

can cause items near the top of the load to develop dry spots

during the nal spin. This is normal.

Incorrect or wrong wash

or rinse temperatures Check for proper water supply. Make sure hot and cold inlet hoses are not reversed.

Both hoses must be attached to both washer and faucet, and

have both hot and cold water owing to inlet valve.

Check that inlet valve screens are not clogged.

Remove any kinks in hoses.

Energy saving controlled wash

temperatures. This washer uses cooler wash and rinse water temperatures

than your previous washer. This includes cooler hot and warm

washes.

Load not rinsed Check for proper water supply. Make sure hot and cold inlet hoses are not reversed.

Both hoses must be attached and have water owing to the inlet

valve.

Both hot and cold water faucets must be on.

Inlet valve screens on washer may be clogged.

Remove any kinks in the inlet hose.

Using too much detergent. The suds from too much detergent can keep washer from

operating correctly. Always measure detergent and follow

detergent directions based on load size and soil level.

Washer not loaded as recommended. The washer is less efcient at rinsing when load is tightly packed.

Load garments in loose heaps evenly around the basket wall.

Load with dry items only.

Use cycle designed for the fabrics being washed.

Add only 1 or 2 additional garments after washer has started.

Using too low a Load Size selection. Choose a Load Size that matches the load being washed.

Sand, pet hair, lint, etc.

on load after washing Heavy sand, pet hair, lint, and

detergent or bleach residues may

require additional rinsing.

Select the Rinse/Spin cycle. Do not add detergent.

Load is tangling Washer not loaded as recommended. See “Using Your Washer” section.

Select a cycle with a slower wash action and spin speed; items

will be wetter than those using a higher speed spin. See the

“Cycle Guide” to match your load with the best cycle.

Load garments in loose heaps evenly around the basket wall.

Reduce tangling by mixing types of load items. Use the

recommended cycle for the type of garments being washed.

First try the solutions suggested here or visit our website at www.amana.custhelp.com -

In Canada www.amanacanada.ca for assistance and to possibly avoid a service call

TROUBLESHOOTING

If you experience Possible Causes Solution

Washer not performing as expected (cont.)

Not cleaning or removing

stains Washer not loaded as recommended. Washer is less efcient at cleaning when load is tightly packed.

Load garments in loose heaps evenly around the basket wall.

Load with dry items only.

Add only 1 or 2 additional garments after washer has started.

Adding detergent on top of load. Add detergent, oxi products, and color-safe bleach to the

bottom of the basket before adding the load items.

Using too low a Load Size selection. Choose a Load Size that matches the load being washed.

Using too much detergent. The suds from too much detergent can keep washer from

operating correctly. Always measure detergent and follow

manufacturer’s directions based on load size and soil level.

Not using correct cycle for fabric

type. Use a higher soil level cycle option and warmer wash

temperature to improve cleaning.

Use Normal Heavy cycle for tough cleaning. See the “Cycle

Guide” to match your load with the best cycle.

Not cleaning or

removing stains (cont.) Not using dispensers.

Use dispensers to avoid chlorine bleach and fabric softener staining.

Load dispensers before starting a cycle. Set Fabric Softener

option knob to YES when using fabric softener.

Do not add products directly onto load.

Not washing like colors together. Wash like colors together and remove promptly after the cycle is

complete to avoid dye transfer.

Incorrect dispenser

operation Clogged dispenser. Use only liquid chlorine bleach in the bleach dispenser. Use only

fabric softener in the fabric softener dispenser.

Fabric damage Sharp items were in pockets during

wash cycle. Empty pockets, zip zippers, and snap or hook fasteners before

washing to avoid snags and tears.

Strings and straps could have

tangled. Tie all strings and straps before starting wash load.

Items may have been damaged

before washing. Mend rips and broken threads in seams before washing.

Fabric damage can occur if load is

tightly packed. Load garments in loose heaps evenly around the basket wall.

Load with dry items only.

Use cycle designed for the fabrics being washed.

Add only 1 or 2 additional garments after washer has started.

Liquid chlorine bleach may have

been added incorrectly. Do not pour liquid chlorine bleach directly onto load. Wipe up

bleach spills.

Undiluted bleach will damage fabrics. Do not use more than

recommended by manufacturer.

Do not place load items on top of bleach dispenser when loading

and unloading washer.

Garment care instructions may not

have been followed. Always read and follow garment manufacturer’s care label

instructions. See the “Cycle Guide” to match your load with the

best cycle.

Odors Monthly maintenance not done as

recommended. See “Cleaning Your Washer” in Washer Maintenance.

Unload washer as soon as cycle is complete.

Using too much detergent. Be sure to measure correctly. Always follow the manufacturer’s

directions.

See “Cleaning your Washer” section.

Lid Locked light is

ashing The lid is not closed. Close the lid. The washer will not start or ll with the lid open.

A cycle was stopped or paused using

the START/Pause/Unlock Lid button. The washer may still be spinning. The lid will not unlock until the

basket has stopped spinning. This may take several minutes if

washing large loads or heavy fabrics.

Single-dose laundry

packet not dissolving Adding laundry packet incorrectly. Be sure laundry packet is added to washer basket before

adding clothes. Do not add packet to dispenser. Follow the

manufacturer’s instructions to avoid damage to your garments.

First try the solutions suggested here or visit our website at www.amana.custhelp.com -

In Canada www.amanacanada.ca for assistance and to possibly avoid a service call

Produktspecifikationer

Varumärke:	Amana
Kategori:	tvättmaskin
Modell:	NTW4630YQ

Behöver du hjälp?

Om du behöver hjälp med Amana NTW4630YQ ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

tvättmaskin Amana Manualer

Amana NTW4630YQ Bruksanvisning

13 Januari 2025

Amana NFW7300WW Bruksanvisning

7 September 2024

Amana NFW5800DW Bruksanvisning

5 September 2024

Amana NFW5800HW Bruksanvisning

4 September 2024

Amana NTW5400TQ0 Bruksanvisning

3 September 2024

Amana NGD4655E Bruksanvisning

3 September 2024

Amana NTW4600VQ Bruksanvisning

1 September 2024

Amana NTW4500XQ Bruksanvisning

1 September 2024

Amana NTW4615EW Bruksanvisning

1 September 2024

Amana NAV3330EWW Bruksanvisning

1 September 2024

tvättmaskin Manualer

Nyaste tvättmaskin Manualer

Friac wa 1231 e Bruksanvisning

9 April 2025

Zanussi-electrolux fjs 1486 x Bruksanvisning

9 April 2025

Miele WSE383 WCS Bruksanvisning

9 April 2025

AEG Electrolux 74604 oko lavamat Bruksanvisning

8 April 2025

Electrolux ewc 1350 Bruksanvisning

8 April 2025

Hotpoint NDB 10748 WA Bruksanvisning

8 April 2025

Whirlpool FFB 7269 BV Bruksanvisning

8 April 2025

Whirlpool FFWDD 107448 WBS Bruksanvisning

8 April 2025

Whirlpool TDLR 6261BS Bruksanvisning

8 April 2025

Ariston AVL89 Bruksanvisning

7 April 2025