AMX CB-TP5ib Bruksanvisning
AMX
Platt panelstöd
CB-TP5ib
Läs nedan 📖 manual på svenska för AMX CB-TP5ib (2 sidor) i kategorin Platt panelstöd. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/2
Installation Guide
CB-TP5i Rough-In Box for NXD-500i 5" Touch Panel
Overview
The CB-TP5i Rough-In Box (FG038-11) is an optional accessory for the NXD-500i
Modero® Wall/Flush Mount Touch Panel. The Rough-In Box allows the panel to be
mounted directly to the studs/pre-wall. The NXD-500i is contained within a plastic
outer housing or back box, and the back box attaches to the Rough-In Box.
Specifications
WARNING: In order to guarantee a stable installation of the NXD-500i, the distance
between the CB-TP5i and the outer wall surface must be a minimum of .50 inches
(1.27cm) and a maximum of .875 inches (2.22cm).
• Refer to the SP62-0038-01 diagram for detailed installation dimensions.
Pre-Wall Installation of the CB-TP5i Rough-In Box
1. Remove the rough-in box cover (A in FIG. 1) before installation of the Rough-In
Box (B). Note: the cover MUST be removed before drywall installation. The
cover may be reinstalled after drywall installation using 4-40 screws (not
included).
2. Attach the optional Back Cover for the CB-TP5i (FG038-12) if necessary, as
required by building codes. (For more information, refer to the Back Cover
Installation section on page 2.)
3. Fasten the CB-TP5i rough-in box to the stud through the holes on the Stud
Mounting tabs (FIG. 2), using either nails or screws (not provided).
4. Remove the appropriate wiring knockouts from the rough-in box to
accommodate the cables being threaded through to the NXD-500i touch panel.
5. Thread the incoming Ethernet and USB wiring through the knockouts. Use of the
left wiring knockouts is recommended with this installation for ease of connection
of the cables to the touch panel. Leave enough slack in the wiring to
accommodate installation of the panel.
6. Install the drywall/sheetrock before inserting the main NXD-500i device into the
CB-TP5i.
7. Cut out the opening for the NXD-500i where the wall has been placed over the
Rough-In Box. Cutting out the surface slightly smaller than what is outlined in the
installation drawings, so that you can make any necessary cutout adjustments, is
very highly recommended.
FIG. 1 CPB-TP5i Rough-In Box - Front and Back Views
CB-TP5i (FG038-11) Specifications
Dimensions (HWD) • 6.73" x 9.30" x 1.43"
• 17.09 cm x 23.62 cm x 3.63 cm
Certifications • UL 508A
Front Rear
Wiring Knockouts
Breakaway Stud
Mounting Flanges
A
B
2 locations to secure cover
after applying drywall
(8-32 x .25 screws)
3 locations to secure cover
after applying drywall
FIG. 2 CB-TP5i - Mounted to Wall Stud
Stud
Recommended Cutout for
CB-TP5i Rough-In Box
For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
4/11
©2011 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX.
AMX reserves the right to alter specifications without notice at any time.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com
93-038-11 REV: B
CB-TP5i Top CB-TP5i Break-Away
Side of Rough-In Box
With Break-Away Flanges
Optional Back Cover
for the CB-TP5i (FG038-12)
(Only for areas where
required by building codes.)
Flange detail
Back Cover Installation
Assembly of CB-TP5i and Back Plate
Screws (80-0114-01), #4-20 x .375
CB-TP5i
Back Plate
Note: two screw holes in
flanges at top and bottom
of Back Plate, but one
screw hole per flange on
sides.
Produktspecifikationer
| Varumärke: | AMX |
| Kategori: | Platt panelstöd |
| Modell: | CB-TP5ib |
Behöver du hjälp?
Om du behöver hjälp med AMX CB-TP5ib ställ en fråga nedan och andra användare kommer att svara dig
Platt panelstöd AMX Manualer
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
Platt panelstöd Manualer
- Platt panelstöd Samsung
- Platt panelstöd HP
- Platt panelstöd Pioneer
- Platt panelstöd Abus
- Platt panelstöd Acco
- Platt panelstöd Akai
- Platt panelstöd Icy Box
- Platt panelstöd Hitachi
- Platt panelstöd Gembird
- Platt panelstöd SilverStone
- Platt panelstöd LC-Power
- Platt panelstöd GPX
- Platt panelstöd Blaupunkt
- Platt panelstöd Manhattan
- Platt panelstöd Tripp Lite
- Platt panelstöd Vision
- Platt panelstöd Kensington
- Platt panelstöd Nabo
- Platt panelstöd Nec
- Platt panelstöd Techly
- Platt panelstöd BlueBuilt
- Platt panelstöd Da-Lite
- Platt panelstöd Luxor
- Platt panelstöd Steren
- Platt panelstöd Iiyama
- Platt panelstöd Barkan
- Platt panelstöd Digitus
- Platt panelstöd Insignia
- Platt panelstöd Sanus
- Platt panelstöd Peerless-AV
- Platt panelstöd Vogels
- Platt panelstöd Fellowes
- Platt panelstöd Dell
- Platt panelstöd Planar
- Platt panelstöd Sven
- Platt panelstöd Konig
- Platt panelstöd One For All
- Platt panelstöd Ematic
- Platt panelstöd Newstar
- Platt panelstöd Ewent
- Platt panelstöd HQ
- Platt panelstöd BakkerElkhuizen
- Platt panelstöd Ultimate
- Platt panelstöd Wentronic
- Platt panelstöd Peerless
- Platt panelstöd Proaim
- Platt panelstöd Monoprice
- Platt panelstöd Chief
- Platt panelstöd Ergotron
- Platt panelstöd Gabor
- Platt panelstöd Konig & Meyer
- Platt panelstöd Premier
- Platt panelstöd Atdec
- Platt panelstöd StarTech.com
- Platt panelstöd SIIG
- Platt panelstöd Bell'O
- Platt panelstöd B-tech
- Platt panelstöd Speaka
- Platt panelstöd Crimson
- Platt panelstöd Kogan
- Platt panelstöd Panduit
- Platt panelstöd Schwaiger
- Platt panelstöd Premier Mounts
- Platt panelstöd Cabstone
- Platt panelstöd Elite Screens
- Platt panelstöd Kanto
- Platt panelstöd V7
- Platt panelstöd Kondator
- Platt panelstöd Bretford
- Platt panelstöd SmartMetals
- Platt panelstöd Unicol
- Platt panelstöd Anthro
- Platt panelstöd Alogic
- Platt panelstöd Equip
- Platt panelstöd Zaor
- Platt panelstöd Dataflex
- Platt panelstöd Multibrackets
- Platt panelstöd Rocstor
- Platt panelstöd CTA Digital
- Platt panelstöd Amer
- Platt panelstöd SunBriteTV
- Platt panelstöd Avteq
- Platt panelstöd Walker Edison
- Platt panelstöd My Wall
- Platt panelstöd Mount-It!
- Platt panelstöd LTN Technologies
- Platt panelstöd Heckler
- Platt panelstöd Helder
- Platt panelstöd NeoMounts
Nyaste Platt panelstöd Manualer
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025