AMX MXA-HST Bruksanvisning

AMX Hörlurar MXA-HST

Läs nedan 📖 manual på svenska för AMX MXA-HST (2 sidor) i kategorin Hörlurar. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/2
Installation Guide
MXA-HST Modero X Series® Bluetooth Handset
Overview
The MXA-HST Modero X Series® Bluetooth Handset (FG5968-17) is an optional
accessory for use with the Modero X Series Touch Panels. The handset allows
wireless Bluetooth audio communication through the touch panel, while the handset’s
Charging Cradle allows recharging either with a USB connection to the touch panel or
via the included electrical adapter.
Product Specifications
Safety and Battery Charging Information
Safety Information
• Do not dismantle, open, or shred the battery.
• Do not short-circuit the battery. Do not store batteries haphazardly in a box or
drawer where they may short-circuit each other or be short-circuited by conduc-
tive materials.
• Do not remove a battery from its original packaging until required for use.
• Do not expose batteries to heat or fire. Avoid storage in direct sunlight.
• Do not subject the batteries to mechanical shock.
• In the event of a cell leaking, do not allow the liquid to come in contact with the
skin or eyes. If contact has been made, wash the affected area with copious
amounts of water and seek medical advice.
• Equipment should be designed to prohibit the incorrect insertion of the battery
and its connector.
• Store the batteries in a dry place with the temperature between 32° F (0° C) and
104° F (40° C).
• Secondary batteries give their best performance when they are operated at
normal room temperature: 68° F +/- 5° (20° +/- 5° C).
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions.
Charging
• Use only with approved charger.
• Charge with a constant-voltage, constant-current battery charger circuit with the
following parameters:
Maximum charge voltage: 5.2 +/- 0.5 VDC
Maximum charge current: 120 mA
Charging temperature range: 2.5 deg C to 37.5 deg C (+/- 2.5 deg C)
Disposal
• When disposing of batteries, keep cells or batteries of different electrochemical
systems separate from each other.
• .Recycle or dispose of this battery in accordance with local regulations
1. When this crossed-out wheeled bin symbol is attached to a product, it means
the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products/battery should be disposed of separately
from the municipal waste stream via designated collection facilities appointed by
the government or the local authorities.
3. The correct disposal of your old appliance/battery will help prevent potential
negative consequences for the environment and human health.
For more detailed information about disposal of your old appliance/battery, please
contact your city office, waste disposal service or the shop where you purchased the
product.
FCC Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Indicator Light Status
The indicator light on the back of the MXA-HST (FIG. 1) flashes and changes color
based on the handset’s current status.
FIG. 1 MXA-HST Handset
MXA-HST Specifications
Power Requirements: DC 5V, 500mA
Bluetooth Specification: v2.1+EDR Class 2
Bluetooth Profiles
Supported:
Headset v1.2, HandsFree v1.5
Range of Frequency: 2.4GHz Spectrum
Nominal Charging Time: Within 8 hours
Talk Time: Up to 35 hours
Standby Time: Up to 200 hours
Dimensions (HWD): • Handset: 6.88” x 1.62” x 0.77” (17.46 cm x 4.12 cm x
1.95 cm)
• Charging Cradle: 1.93” x 3.64” 3.01” (5.06 cm x 9.25
cm x 7.65 cm)
Weight: • Handset: 0.2 lbs (90.72 g)
• Charging Cradle: 0.2 lbs (90.72 g)
Certifications: • CE
• Bluetooth
• FCC part 15 Class A
Other AMX Equipment: • MXA-IPA International Power Adapter Accessory Kit
( )FG5968-31
•MXA-BT Bluetooth USB Adaptor (FG5968-19)
Front Back
Indicator Light
Multi-Function
Button
Mute Button
Volume Up/
Volume Down
Buttons
Indicator Light Status
Handset Status Indicator Light
Standby Flash white
Charging (OFF STATE) Solid blue
Fully Charged (OFF STATE) Solid white
Charging (ON STATE) Solid blue, flash white every 10 seconds
Fully Charged (ON STATE) Solid white, flash white every 10 seconds
Mute Solid red
Low Battery Flash red with beep every minute
Out of Charge Indicator light turns off
Out of Range Solid blue for 5 seconds
For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
12/12
©2012 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX.
AMX reserves the right to alter specifications without notice at any time.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com
93-5968-17 REV: A
Getting Started
To use your MXA-HST Bluetooth handset:
1. Ensure that your handset is fully charged.
2. Ensure that you have installed an MXA-BT Bluetooth USB Adaptor (FG5968-19)
to the USB port of your touch panel.
NOTE: An MXA-BT Bluetooth USB Adaptor is necessary to use the MXA-HST with a
Modero X Series touch panel.
3. Ensure that you have the latest Modero X Series Panoramic Touch Panel
firmware installed on your panel.
4. Ensure that you have the latest versions of the AMX Communications
Application and the Panel-to-Panel Video Chat Module uploaded to your
network Master. These modules are required for full button functionality with
intercom and video conferencing.
NOTE: The Modero X Series Panoramic Touch Panel firmware, the AMX
Communications Application, and the Panel-to-Panel Video Chat Module may be
downloaded at www.amx.com.
5. Pair your charged handset with a Modero X Series touch panel. For more
information, please refer to the Pairing the MXA-HST with a Modero X Series
Touch Panel section on page 2 below.
Charging the MXA-HST
The MXA-HST comes with a built-in rechargeable battery. Prior to using the handset
for the first time, fully charging the battery is highly recommended.
To charge your handset:
1. If you wish to charge your MXA-HST via USB, insert the USB plug of the
Charging Cradle (FIG. 2) into an available USB port on the Modero X Series
touch panel.
2. Insert the base of the handset into the Charging Cradle. The indicator light on
the back of the handset will turn blue while the handset is charging and solid
white when it is fully charged. The charging indicator will be delayed for a few
seconds if the handset has not been used for a long time or the battery is
drained.
NOTE: Use only the supplied Charging Cradle and USB charging cable to charge the
handset.
WARNING: Do not use the handset while it is seated in the Charging Cradle.
NOTE: Fully charging the handset may require up to eight hours.
Pairing the MXA-HST with a Modero X Series Touch Panel
To pair your handset with a Modero X Series touch panel:
1. Ensure that your handset is off before starting.
2. To activate the pairing mode, press and hold the handset’s Multi-Function
Button (MFB) (FIG. 1) for 8 seconds.
3. From the touch panel’s Settings Pages, pair the device with the touch panel. For
more information on pairing a Modero X Series touch panel with a Bluetooth
device, please refer to the Modero X Series Programming Guide, available from
www.amx.com.
4. If the pairing cannot be completed within two minutes after the pairing mode has
been activated, the indicator light on the back of the MXA-HST will flash blue
rapidly five times and then shut off. Repeat steps 1 through 3 to pair both
devices again.
Resetting the MXA-HST/Removing Its Pairing History
To reset your MXA-HST handset or remove its Bluetooth pairing history:
1. While the handset is in OFF mode, hold the Volume button and seat the hand-
set into the Charging Cradle. The indicator light will flash blue twice.
2. Release the Volume button.
3. The indicator light will stay blue again and the handset is reset.
Using the MXA-HST with a Modero X Series Touch Panel
FIG. 2 MXA-HST Charging Cradle (front)
Using the MXA-HST with a Modero X Series Touch Panel
Function Button Audio Indicator LED Indicator
Power ON Press and hold
MFB for 2
seconds
Short beep through
the earphone Flash white light
3 times
Power OFF Press and hold
MFB for 2
seconds
Long beep through
the earphone Flash blue light 2
times and then
turns off
Standby/Wake Up N/A N/A Flash white light
every 10 seconds
Charging N/A N/A Solid blue light
Fully Charged N/A N/A Solid white light
Low battery N/A Long beep through
the earphone Flash red light
Out of battery N/A N/A All lights turn off
Out of range N/A Long beep through
the earphone Solid blue light
for 5 seconds
Pairing Press and hold
MFB for 8
seconds
N/A Flash white and
blue lights
alternately
Incoming Call N/A Ringtone through the
earphone Blinking blue light
Answer/End a call Press MFB once Two step-up tones
for Answer
Two step-down tones
for Hang-up
Flash white light
every 10 seconds
Adjust Volume Press VOL UP
and VOL DOWN Short beep through
the earphone N/A
Last Number Redial Press MFB twice N/A N/A
Reject Incoming Call Hold VOL UP or
VOL DOWN for 2
seconds
Short beep N/A
Mute Press Mute
button once Two-step down tone
for Mute On, with 2
beeps every 10
seconds
Two-step up tone for
Mute Off
Solid red light

Produktspecifikationer

Varumärke: AMX
Kategori: Hörlurar
Modell: MXA-HST

Behöver du hjälp?

Om du behöver hjälp med AMX MXA-HST ställ en fråga nedan och andra användare kommer att svara dig


Hörlurar AMX Manualer

AMX

AMX MXA-HST Bruksanvisning

16 September 2024

Hörlurar Manualer

Nyaste Hörlurar Manualer

Avantree

Avantree HT41899 Plus Bruksanvisning

10 December 2024
Hama

Hama Shell 184143 Bruksanvisning

9 December 2024
Sennheiser

Sennheiser PC 363D Bruksanvisning

9 December 2024
Sennheiser

Sennheiser CX 80S Bruksanvisning

9 December 2024
JBL

JBL Reflect Bruksanvisning

8 December 2024
JBL

JBL Pro+ TWS Bruksanvisning

8 December 2024
JBL

JBL Tune 570BT Bruksanvisning

8 December 2024
JBL

JBL Live Free 2 TWS Bruksanvisning

8 December 2024
Soundcore

Soundcore Life Q35 Bruksanvisning

8 December 2024
Soundcore

Soundcore SoundMAGIC T60BT Bruksanvisning

8 December 2024