Anker Soundcore Flare 2 Bruksanvisning

Anker högtalare Soundcore Flare 2

Läs nedan 📖 manual på svenska för Anker Soundcore Flare 2 (79 sidor) i kategorin högtalare. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/79
EN 01 02 EN
Safety Instructions
Avoid dropping.
Do not disassemble.
Avoid extreme temperatures.
Do not use the product outdoors during thunderstorms.
Use original or certied cables.
Do not use any corrosive cleaner/oil to clean.
Do not expose batteries to heat sources such as direct sunlight, re and or the like.
At a Glance
1 4
2
3
5
7
6
1Light effects button 5Bass Boost button
2Power button 6Bluetooth & PartyCast button
3Volume buttons ( - / +) 7USB-C charging port
4Multi-function button
Charging
• Use the included USB cable to charge your speaker and make sure it is fully
charged before rst use.
• Do not charge your speaker for extended periods.
• When not in use, store your speaker in a cool place.
Powering On/Off
ON
<2”
OFF
>2”
Power on Press
Power off Press and hold for 2 seconds
EN 03 04 EN
Bluetooth Pairing
FLARE 2
1
<2”
Soundcore Flare 2
2
Soundcore Flare 2
Soundcore Flare 2
3
Soundcore Flare 2
FLARE 2 FLARE 2
Press Enter Bluetooth pairing mode
Flashing blue Bluetooth pairing
Steady blue Bluetooth connected
• When powered on, the speaker will automatically connect to the last connected
device if available within the Bluetooth range. If not, press the Bluetooth button
to enter the Bluetooth pairing mode.
• To pair with another device, press the Bluetooth button to re-enter the pairing
mode.
PartyCast Mode
Set up one Flare 2 as the primary speaker and connect it with more than 100+ secondary Flare
2 speakers to control audio and all the light effects.
Set up the primary speaker:
1. Connect one Flare 2 speaker to your phone or other devices via Bluetooth. When
successfully connected, the Bluetooth LED will turn blue.
2. Press and hold the Bluetooth button on this Flare 2 for 3 seconds until you hear a sound and
the Bluetooth LED ashes white to indicate this Flare 2 is the primary speaker.
• The Bluetooth LED on the primary speaker will keep ashing white.
Connect with secondary speakers:
1. Make sure the secondary speakers aren't connected to any Bluetooth devices.
• Press the Bluetooth button to disconnect Flare 2 from a device, the Bluetooth
LED will ash blue.
2. Press the Bluetooth button for 3 seconds until you hear a sound and the Bluetooth LED
ashes white to indicate the secondary speaker is in connection mode.
3. When the secondary speakers are close to the primary speaker, they will connect to the
primary speaker automatically. When successfully connected, the Bluetooth LED on the
primary speaker will continue ashing white, while on the secondary speakers will turn white.
1
FLARE 2
2
FLARE 2
>3”
FLARE 2
FLARE 2
FLARE 2
FLARE 2
When successfully enter the PartyCast mode:
• you can power off, adjust the volume, or switch light effects for all speakers by controlling
the primary speaker only;
• you can power off or switch light effects for each secondary speaker individually;
• you can't adjust the volume for each secondary speaker individually;
• to exit the PartyCast mode, press the Bluetooth button either on the primary speaker or
on the primary speaker for 3 seconds until the Bluetooth LED ashes blue.
Button Controls
Play / Pause X1 Press
Next track X2 Press twice
Previous track X3 Press thrice
Bass Boost On / Off X1 Press

Produktspecifikationer

Varumärke: Anker
Kategori: högtalare
Modell: Soundcore Flare 2

Behöver du hjälp?

Om du behöver hjälp med Anker Soundcore Flare 2 ställ en fråga nedan och andra användare kommer att svara dig


högtalare Anker Manualer

Anker

Anker Premium Stereo A3143 Bruksanvisning

7 Augusti 2024
Anker

Anker A7910 Bruksanvisning

28 Juli 2024
Anker

Anker SoundCore Pro Bruksanvisning

25 Juli 2024
Anker

Anker A7912 Outdoor Bruksanvisning

22 Juli 2024
Anker

Anker A3142 - SoundCore Pro plus SM-A429 Bruksanvisning

22 Juli 2024
Anker

Anker Soundcore Motion plus Bruksanvisning

21 Juli 2024
Anker

Anker Soundcore Rave Bruksanvisning

21 Juli 2024
Anker

Anker Soundcore Flare 2 Bruksanvisning

21 Juli 2024
Anker

Anker A3145 - SoundCore Boost - SM-A484 Bruksanvisning

20 Juli 2024

högtalare Manualer

Nyaste högtalare Manualer

Continental Edison

Continental Edison CELED53HP20V2B4 Bruksanvisning

27 Oktober 2024
Canton

Canton Vento 830.2 Bruksanvisning

27 Oktober 2024
Jamo

Jamo S7-25C Bruksanvisning

27 Oktober 2024
Bowers Wilkins

Bowers Wilkins 707 S2 Bruksanvisning

27 Oktober 2024
Monitor Audio

Monitor Audio Silver C150 Bruksanvisning

26 Oktober 2024
FBT

FBT MITUS 210M Bruksanvisning

26 Oktober 2024
CyberData Systems

CyberData Systems SIP 011398 Bruksanvisning

26 Oktober 2024
Lamax

Lamax PartyGo1 Play Bruksanvisning

26 Oktober 2024
IKEA

IKEA SYMFONISK 405.847.50 Bruksanvisning

26 Oktober 2024
IKEA

IKEA SYMFONISK 804.923.34 Bruksanvisning

26 Oktober 2024