Anthro Fit Utility Unit Bruksanvisning
Läs nedan 📖 manual på svenska för Anthro Fit Utility Unit (2 sidor) i kategorin Byrå. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/2
R
01–Work Surface
.................................
Qty. 1
.......................
(see below)
24" Wide Work Surface
(FY2429zz/xx3)
...........
100-6431-00
30" Wide Work Surface
(FY3029zz/xx3)
...........
100-6440-00
36" Wide Work Surface
(FY3629zz/xx3)
...........
100-6535-00
02– Fit Small Support Y
....................
Qty. 1
...................
225-2015-00
03– 22.875" Vertical Legs
.................
Qty. 4
...................
125-5213-00
04– 21" Base Tubes
..............................
Qty. 2
..................
125-5275-00
05– Cross Tubes
...............................
Qty. 2
.......................
(see below)
24" Wide Base Tube
(FY2429zz/xx3)
...................
125-5218-00
30" Wide Base Tube
(FY3029zz/xx3)
...................
125-5219-00
36" Wide Base Tube
(FY3629zz/xx3)
...................
125-5220-00
06– Insert Screws
.................................
Qty. 4
...................
325-5052-00
07– 2" Large End Caps
.......................
Qty. 4
...................
175-5157-00
08– 3" Locking Casters
......................
Qty. 2
...................
150-5053-00
09– Caster Inserts
...............................
Qty. 4
...................
525-5032-00
10–
5
/
16
"-18 Fit
Bolts
............................
Qty. 8
...................
325-5194-00
11– Fit
Tube Washers
.........................
Qty. 8
..
225-2050-00 or 225-3522-00
Component part list for part #’s
FY2429zz/xx3, FY3029zz/xx3, FY3629zz/xx3
12– 3" Non-Locking Casters
...........
Qty. 2
...................
150-5052-00
13–
3
/
4
" Wood Screws
.........................
Qty. 8
...................
325-5106-00
14– Fit Small Support X
....................
Qty. 1
...................
225-2014-00
15– Support Screws
............................
Qty. 8
...................
325-5010-00
16– Back Trough
....................................
Qty. 1
.......................
(see below)
24" Wide Back Trough
(FY2429zz/xx3)
..............
225-2289-00
30" Wide Back Trough
(FY3029zz/xx3)
..............
225-2290-00
36" Wide Back Trough
(FY3629zz/xx3)
..............
225-2291-00
17– 1.5" Small Caps
.............................
Qty. 4
...................
175-5156-00
18–
1
/
4
"-20 Button Head Screws
....
Qty. 4
...................
325-5003-00
All Screw quantities listed here are the minimum needed
for your Utility Unit assembly. There may be a few extra
Screws included, which are not counted in the Parts List.
Anthro
Corporation Technology Furniture
®
10450 SW Manhasset Drive Tualatin, Oregon 97062 anthro.com
SAVE THESE INSTRUCTIONS!
Rev. D January 2006
Step 7
Attaching the Base Assembly to the Legs
Align the Base Assembly on the Legs as shown. Secure
the Base Assembly to the Legs by inserting a Bolt through
Tube Washer and attach loosely.
Repeat for the remaining three Bolts, then tighten all the
fasteners (see steps 2 and 4).
Step 8
The Final Step
Carefully rotate your Utility Unit onto its Casters.
Insert the four 1.5" End Caps into the Legs.
Congratulations!
Your assembly is complete.
1-800-325-3841
Hello!
Thank you for choosing Anthro.
Before beginning assembly of your
Utility Unit, please take a moment to
review the parts listed below to verify
that your shipment is complete.
Please review the assembly
instructions of all Anthro products
you purchased and are planning to
include in this installation prior to
beginning this assembly.
To make the assembly of your Utility
Unit even easier, p1-we have included
of the required tools. The handy Hex
Driver Bit can be used in your electric
drill in place of the Hex Driver.
Hex Driver
5
/
32
"
...........
375-5000-00
Hex Driver Bit
5
/
32
"
.....
375-5003-00
8 oz. Rubber Mallet
.....
375-5022-00
Questions?
1-800-325-3841
(
5
/
6
"-18 X 3.5”) Fit Bolt
325-5194-00
Fit
Tube Washer
225-2050-00 or 225-3522-00
06
05
01
2
4
16
0
1.5" Small End Cap
Fit Bolt
Fit Tube
Washer
Cross Tube
24"/30"/36" wide Utility Unit
Assembly Instructions
Detailed views of all Hardware are provided
with each Assembly Step.
Please return the enclosed Registration Card to receive our product updates, new catalogs, and
sale fl yers; you’ll be entered to win our monthly drawing of $300.00 of Anthro products!
Thank you for choosing Anthro!
Anthro
Corporation Technology Furniture
®
10450 SW Manhasset Drive Tualatin, Oregon 97062
Step 1
Attaching Shelf Supports to the Shelf
Place your Work Surface onto the fl oor with the
predrilled holes facing upward.
Position the Small Supports onto the Work Surface and
align two of the holes on each Small Support with the
predrilled holes on the Work Surface.
Secure each Small Support to the Work Surface
using two Wood Screws per Support.
anthro.com
Step 3
Determine the Shelf Height
Determine the best height for your Shelf. These instructions
will place your Shelf 29" from the Floor using the standard
3" Casters.
For a fi nal Shelf height that is lower than 29", adjust one
hole down for each inch of variance desired.
NOTE
: Your Shelf location may be changed after your Utility Unit
has been completely assembled by referring to Step 4.
Step 4
Attaching the Legs to the Work Surface
The Utility Unit Legs have a coped (curved) end and a
fl at end. The fl at end attaches to the Work Surface.
Attach a Leg to the rear of the Shelf using two Support
Screws. Insert the screws through the holes in the Shelf
Support and into the fi rst and third holes on the leg; leave
the screws a little loose. Repeat for the other three legs.
Step 5
Assembling the Base Tube
Install two caster Inserts into each Base Tube and secure
with one Insert Screw per Caster Insert.
Insert one Locking Caster and one Non-locking Caster
into the Inserts on each Base Tube. The Non-locking
Caster should be near the two side holes.
Insert 2" End Caps into the ends of each Base Tube.
Questions? 1-800-325-3841
Support Screw
325-5010-00
Step 2
Attaching the Back Trough to the Shelf Supports
Place the Back Trough onto the Work Surface, between
the installed Small Supports
(from Step 1)
.
Align the two threaded holes on each end of the Back
Trough with those on both Shelf Supports. Carefully thread
one Button Head Screw through the Shelf Support and into
the Back Trough, but don’t tighten all the way.
Repeat for the remaining three Button Head Screws, and
leave them all a slightly loose.
Align the holes in the bottom fl ange of the Back Trough with
the pre-drilled holes on the Work Surface. Attach the Back
Trough to the Work Surface using two Wood Screws.
3
/
4
" Wood Screw
325-5106-00
3
/
4
" Wood Screw
325-5106-00
(
/
4
"-20 X .50") Button Head Screw
325-5003-00
29"
Insert Screw
(small pink patch on end)
325-5052-00
Small Support X
Small Support Y
Small Support X
FIRST
: Install the Button Head Screws
TT
SECOND:
Install the Wood Screws
Back Trough
Back Trough fl ange
NOTE
: Make certain to install
the Back Trough in front of the
Small Supports.
Threaded holes
Locking
Caster
Caster Inserts placed
into the large holes
Leave these two side holes open
Non-Locking
Caster
Hole 1=29"
Final Work Surface Height
Small Support X
Hole 1
Top
(non-coped)
end
Bottom
(coped)
end
Hole 3
REAR LEG
FRONT
LEG
24"/30"/36" wide Utility Unit
Assembly Instructions
Wood Screw
Support Screw
End Cap
Step 6
Attaching the Cross Tubes to the Base Tubes
Attach a Cross Tube to a Base Tube by inserting a
Fit Bolt
through a Tube Washer, then insert the Bolt through
the
Base Tube and carefully thread into the Cross Tube.
Repeat this procedure for other Cross Tube. Then tighten
all
Fit
Bolts.
Fit Tube Washer
225-2050-00 or 225-3522-00
Cross Tube
Fit Tube
Washer
(
5
/
6
"-18 X 3.5") Fit Bolt
325-5194-00
Fit Bolt
Base Assembly
Locking
Caster
Non-Locking
Caster
Produktspecifikationer
| Varumärke: | Anthro |
| Kategori: | Byrå |
| Modell: | Fit Utility Unit |
Behöver du hjälp?
Om du behöver hjälp med Anthro Fit Utility Unit ställ en fråga nedan och andra användare kommer att svara dig
Byrå Anthro Manualer
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
18 September 2024
Byrå Manualer
- Byrå IKEA
- Byrå Ahrend
- Byrå Aeris
- Byrå Jysk
- Byrå Bush
- Byrå United Office
- Byrå Thermaltake
- Byrå Techly
- Byrå BDI
- Byrå Paidi
- Byrå Livarno
- Byrå Sandberg
- Byrå Digitus
- Byrå Insignia
- Byrå Fellowes
- Byrå Habitat
- Byrå Foppapedretti
- Byrå Cooler Master
- Byrå Corsair
- Byrå Newstar
- Byrå Hooker
- Byrå Butler
- Byrå Alpha Gamer
- Byrå Cougar
- Byrå Chief
- Byrå Arozzi
- Byrå Gamdias
- Byrå Bell'O
- Byrå Four Hands
- Byrå Durable
- Byrå Kogan
- Byrå ThunderX3
- Byrå Bretford
- Byrå Zomo
- Byrå X Rocker
- Byrå AeroCool
- Byrå Ultradesk
- Byrå Worktrainer
- Byrå Zaor
- Byrå Glorious
- Byrå OKA
- Byrå Game Shark
- Byrå Seville Classics
- Byrå Yaasa
- Byrå CoolerMaster
- Byrå FOURZE
- Byrå Overdrive
- Byrå Xtech
- Byrå Ergolux
Nyaste Byrå Manualer
26 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
1 Oktober 2024
30 September 2024
26 September 2024