Apc SMT3000I Bruksanvisning

Apc UPS SMT3000I

Läs nedan 📖 manual på svenska för Apc SMT3000I (5 sidor) i kategorin UPS. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/5

Installation Guide SMT 2200/3000 VA

Input/Output Hardwire Kit

Safety

Adhere to all national and local electrical codes. A certified electrician must perform all electrical

connections.

1. Disconnect equipment connected to the UPS.

2. Press the OFF button located on the front of the UPS.

3. Disconnect the batteries in the UPS.

4. Disconnect the UPS from utility power.

NOTE: When removing the panels from the UPS, note which cable is connected to the AC input. There are two

4-pin connectors on the UPS and they are not interchangeable.

Inventory

Note: The illustrations in this document may differ slightly from the actual hardware.

Terminal block

Terminal block label

2 screws secure the

terminal block to the UPS

4 grounding screws 8 screws

secure input, output, and

blank panels to the UPS

2 wire nuts

Input panel

Output panel

Blank panel

Hardwire Kit SMT2200/3000 VA 100/120/230 VAC Tower2

Installation

Note: It is recommended that the input and output cables be connected to the terminal block prior to

installing the terminal block in the UPS.

Remove the five screws that secure the factory

installed PDU panels to the UPS.

Save the screws.

Disconnect the PDU input and output cables as

shown in the diagram.

Secure the replacement input and output panels

(supplied), to the UPS. Secure the panels with

four of the screws removed from the factory

installed PDU panel.

Install appropriate strain relief clamps (not

supplied), to the input and output panels as

shown in the diagram.

su0669b

C Input Connector

su0670a

Hardwire Kit SMT2200/3000 VA 100/120/230 VAC Tower 3

Secure the terminal block and label to the UPS

with two screws (supplied), as shown in the

diagram.

Refer to the diagram below. Use the screws supplied. Connect the ground wires with the grounding screws. Connect the

input and output cables.

su0671a

Primary

Ground

Green Wire

Ground

Input Line1

Hot

Output Line1

Input Line2

or Neutral

Output Line2

or Neutral

su0672a

Produktspecifikationer

Varumärke:	Apc
Kategori:	UPS
Modell:	SMT3000I
Färg på produkten:	Zwart
Förpackningens vikt:	7000 g
Förpackningens bredd:	405 mm
Djuppackning:	260 mm
Förpackningshöjd:	420 mm
Användarmanual:	Ja
Skärm diagonal:	15 "
Upplösning:	1024 x 768 Pixels
Pekskärm:	Ja
Processorfrekvens:	2 GHz
Processorfamilj:	Intel® Celeron®
Processormodel:	J1900
Antal processorkärnor:	4
Grafikadapter:	HD Graphics
Ethernet LAN:	Ja
Medföljande kablar:	AC
Ljusstyrka:	250 cd/m²
Antal USB 2.0-portar:	5
Antal Ethernet LAN (RJ-45)-portar:	1
Certifiering:	CE, RoHS
Internminne:	4 GB
RS-232 port:	1
Förvarings media:	HDD+SSD
Internminnestyp:	DDR3L-SDRAM
Typ av lagringsmedia:	HDD, SSD
VESA montering:	Ja
Panelmonteringsgränssnitt:	75 x 75 mm
Enhetsbredd (med stativ):	380 mm
Djupenhet (med stativ):	230 mm
Enhetshöjd (med stativ):	360 mm
Vikt (med stativ):	5500 g
Ethernet LAN, dataöverföringshastigheter:	10,100,1000 Mbit/s
Stöder Windows:	Windows 10, Windows 7, Windows 8, Windows 8.1
Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ A:	1
Processor antal trådar:	4
Processorns cache:	2 MB
Total lagringskapacitet:	1064 GB
SSD-kapacitet:	64 GB
AC-adapter, utspänning:	12 V
AC-adapter, utström:	5 A
Bostadstyp:	Alles-in-een
Klockhastighetsminne:	1600 MHz
SSD-gränssnitt:	Micro Serial ATA
Linjeutgång:	Ja
Linjeingång:	Ja
HDD kapacitet:	1000 GB
HDD-gränssnitt:	SATA
Pekskärmsteknik:	Capacitief
Bussprocessor på framsidan:	2.42 MHz
Typ av minnesplats:	SO-DIMM
Grafikadapter, tillverkare:	Intel
HDD storlek:	2.5 "
Strömadapter ingår:	Ja
Antal lagringsenheter som stöds:	1
AC-ingångsspänning:	90 - 240 V
AC-ingångsfrekvens:	50 - 60 Hz
Drifttemperatur (TT):	0 - 40 °C
Type beeldscherm:	TFT