Hikvision DS-3000 Bruksanvisning

Hikvision UPS DS-3000

Läs nedan 📖 manual på svenska för Hikvision DS-3000 (2 sidor) i kategorin UPS. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
The buzzer beeps every
8 seconds
The buzzer beeps every
1 second
To test the UPS on battery mode, cut off the utility and UPS observes
backup indicator” lights, then your PC can continue working normally.
MODEL
2000VA 3000VA
8
12V /9Ah x 2 12V /9Ah x4
Ba
Ba
Ba
BaBatt
tt
tt
tttte
e
e
eery ra
ry ra
ry ra
ry rary rati
ti
ti
titing
ng
ng
ngng
Communication software download address:
https www hikvision com en support download software:// . . / / / / /
ups software- /
COMMUNICATION SOFTWARE DOWNLOAD
/ : - - - -S N PN CC625 70033 08D10 08140
110V: 110/115/120VAC; 220V: 220/230/240VAC
110V: 85~145 VAC; 220V: 175~275VAC
110V: 110/115/120VAC; 220V: 220/230/240VAC
110V: 102~132 VAC; 220V: 200~240VAC
45~65Hz
Push the switch for 3 seconds , (the LCD displayinput & output voltage).
then the UPS will be ready for operation.
1. Self-testing while switching on
2. Silence Function
In Battery Mode, shortly press the switch will enable or disable the buzzer.
But when UPS is low battery or overloaded, the buzzer can not be silenced.
3. Autorun
In DC mode, UPS discharges till battery run out and cut off, UPS autorun
when AC recover.
4. Overload protection
When UPS is overloaded on operation, it will cut off the output
automatically if it is not solved by the user in time.
5. Low battery shut off
When the battery is about to be exhausted, UPS will shut down automatically
to protect battery s life.
6. Switching off
1) AC Normal
UPS will cut off the output and goes to AC standby mode by pressing the
switch for 3 seconds.
2) Backup
Press the switch for 3 seconds, the UPS will be turned off after a long beep.
The trouble shooting chart covers most of the difficulties that you may
encounter under normal working conditions. If the UPS fails to operate
properly, please review the following steps before calling the service center.
1. Is the UPS plugged into a correct working outlet?
2. Is the line voltage within the rating specified?
3. Is the fuse or breaker / ciruit protector on back panel open?
1. Model No. & Serial No.
2. Date of problem.
3. Full description of problem.
BREAKE R
250V~,15A
INPUT
220V ~,50Hz
OU TP UT 2 20 V~
+
OUTPUT
SOCKET
AC INPUT
BREAKER
USB Interface
LCD display
ON/OFF Switch
1 .With the UPS unit off and unplugged, connect the
computer, monitor, and any extemally powered data
storage device Zip drive Jazz drive Tape drive)etc. ( , ,
Into the battey power supplied outiets. DO NOT plug
a laser printer, copier, space heater, vacuum, paper
shredder or other large electrical device into the battery
power supplied outlets. The power demands of these
devices will overload and possibly damage the unit.
2. Plug the UPS into a 2 pole, 3 wire grounded
receptacle (wall outlet). Make sure the wall branch
outlet is protected by a fuse or circuit breaker and
does not service equipment with large electrical
demands e.g air. conditioner refrigerator copier( , , , etc ,
Avoid using extension cords.)

Produktspecifikationer

Varumärke: Hikvision
Kategori: UPS
Modell: DS-3000

Behöver du hjälp?

Om du behöver hjälp med Hikvision DS-3000 ställ en fråga nedan och andra användare kommer att svara dig